How do I find out the encoding used to import music?

I want to be sure that all of my music is imported using apple lossless encoding. Can I tell from the file somehow or do I have to re-import everything? thanks

Select a track in your iTunes library that you have imported
Select 'Get Info'
It will then tell you what format it is in
You can also go to the View menu and turn on listing a column called 'Kind' which will say whether it is lossless or not.

Similar Messages

  • How do i find out the size of my checked music

    I'm trying to prepare the tracks I want to transfer to my new iphone 3g (16gig). I have went through "checking" the music i want and "unchecking" that which I dont. Only problem is I dont know the total size of the checked music niw. Anyone know how i figure this out?

    Provided getSomeElements() returns an int[], of course...
    HTH :o)

  • How can I find out the tempo of an imported quicktime audio file?

    Hi. I'm trying to improve my music production skills by emulating the tracks of techno artists that I like.
    My idea is to import one of their mp3 files into an audio track in Logic, so that I can see how they developed their songs.
    After I import the song, it plays fine. But is there anyway to make it so that the track matches up with the grid without altering the tempo of the track itself? Somehow I think if I knew what the tempo for the track was, I could just adjust the tempo for the project and the song would fall in sync with the grid.
    Any ideas?
    Thanks.

    You can find a BPM Counter in the metering folder in your audio plug ins. Just pop that baby on the track you're trying to analyze, hit play, and it will calculate the BPM. Then set the track to that and you're good to go.
    Check out this video too on Beat Mapping, it's got a lot of cool info:
    http://www.youtube.com/watch?v=aqS1UX51teQ

  • How to find out the encoding of an XML input document

    Hello all,
    I read a XML file into a DOM document and would like to save it back in the same encoding as the input. How do I find out the encoding of the input document?
    This is my code for reading the document:
    import java.io.File;
    import java.io.FileInputStream;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.dom.DOMResult;
    import javax.xml.transform.stream.StreamSource;
    import org.w3c.dom.Document;
    Transformer transformer = TransformerFactory.newInstance().newTransformer();
    DOMResult domResult = new DOMResult();
    transformer.transform(new StreamSource(new FileInputStream(fileName)),
                          domResult);
    Document doc = (Document)domResult.getNode();
    .

    FileInputStream fis = new FileInputStream(fileName);
    String encoding = new InputSource(fis).getEncoding();
    fis.close();Note that this only works because you can get an InputStream over the document twice. If the document were coming from an HTTP response (for example) it wouldn't work.

  • How to find out the Transactions used per month & the USER who used that

    Hi,
    1)How to find out the Transactions used per month & the USER who used that?
    2)and can i get the above same for minimum 20 month?
    System : SAP- Enterprise Core Component.

    You can use my program...
    *& Report  Z_ABAP_TCODE_MONITOR
    *****&  Program Type          : Report                                 *
    *****&  Title                 : Z_ABAP_TCODE_MONITOR                   *
    *****&  Transaction code      : ZTCODE_USAGE                           *
    *****&  Developer name        : Shailendra Kolakaluri                  *
    *****&  Deveopment start date : 26 th Dec 2011                         *
    *****&  Development Package   : ZDEV                                   *
    *****&  Transport No          : DEVK906086                                       *
    *****&  Program Description   : This program is to display
    *List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    *& Modification history
    REPORT  Z_ABAP_TCODE_MONITOR.
    *& List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    TYPE-POOLS : slis.
    DATA: ind TYPE i,
          fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          layout TYPE slis_layout_alv,
          variant TYPE disvariant,
          events  TYPE slis_t_event WITH HEADER LINE,
          heading TYPE slis_t_listheader WITH HEADER LINE.
    *REPORT  z_report_usage.
    TYPES: BEGIN OF zusertcode,
      date   TYPE swncdatum,
      user   TYPE swncuname,
      mandt     TYPE swncmandt,
      tcode     TYPE swnctcode,
      report TYPE swncreportname,
      count     TYPE swncshcnt,
    END OF zusertcode.
    *data   : date type n.
    DATA: t_usertcode  TYPE swnc_t_aggusertcode,
          wa_usertcode TYPE swncaggusertcode,
          wa           TYPE zusertcode,
          t_ut         TYPE STANDARD TABLE OF zusertcode,
          wa_result    TYPE zusertcode,
          t_result     TYPE STANDARD TABLE OF zusertcode.
    PARAMETER: month TYPE dats DEFAULT sy-datum.
    *PARAMETER: date TYPE dats.
    *select-options : username for wa_usertcode-account.
    START-OF-SELECTION.
    PERFORM get_data.
    PERFORM get_fieldcatalog.
      PERFORM set_layout.
    PERFORM get_event.
    PERFORM get_comment.
      PERFORM display_data.
    FORM get_data .
    *date = sy-datum - 2 .
    After start-of-selection add this line (parameter Month required 01 as day).
      concatenate month+0(6) '01' into month.
      CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
        EXPORTING
          component     = 'TOTAL'
          ASSIGNDSYS    = 'DEV'
          periodtype    = 'M'
          periodstrt    = month
        TABLES
          usertcode     = t_usertcode
        EXCEPTIONS
          no_data_found = 1
          OTHERS        = 2.
      wa-date  = month.
    *wa-date  = date.
      wa-mandt = sy-mandt.
    wa_usertcode-account = username.
      LOOP AT t_usertcode INTO wa_usertcode.
        wa-user = wa_usertcode-account.
        IF wa_usertcode-entry_id+72 = 'T'.
          wa-tcode  = wa_usertcode-entry_id.
          wa-report = space.
        ELSE.
          wa-tcode  = space.
          wa-report = wa_usertcode-entry_id.
        ENDIF.
        COLLECT wa INTO t_ut.
      ENDLOOP.
      SORT t_ut BY report ASCENDING.
      CLEAR: wa, wa_result.
    endform.
    FORM get_fieldcatalog .
    fcat-tabname     = 't_ut'.
    fcat-fieldname   = 'DATE'.
    fcat-seltext_l   = 'Date'.
    fcat-key         = 'X'.
    APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'MANDT'.
      fcat-seltext_l   = 'Client'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'USER'.
      fcat-seltext_l   = 'User Name'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'TCODE'.
      fcat-seltext_l   = 'Transaction Code'.
      fcat-key         = 'X'.
      APPEND fcat.
    ENDFORM.
    *&      Form  SET_LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM set_layout .
      layout-colwidth_optimize = 'X'.
    ENDFORM.                    " SET_LAYOUT
    *&      Form  GET_EVENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_event .
    events-name = slis_ev_top_of_page.
    events-form = 'TOP_OF_PAGE'.
    APPEND events.
    *ENDFORM.                    " GET_EVENT
    **&      Form  GET_COMMENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_comment .
    DATA: text(30).
    text = 'Billing Report'.
    heading-typ = 'H'.
    heading-info = text.
    APPEND heading.
    *ENDFORM.                    " GET_COMMENT
    **&      Form  top_of_page
          text
    -->  p1        text
    <--  p2        text
    *FORM top_of_page .
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         it_list_commentary       = heading[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    *ENDFORM.                    " top_of_page
    *&      Form  DISPLAY_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM display_data .
      sort t_ut[].
    DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = sy-cprog
          is_layout          = layout
          it_fieldcat        = fcat[]
          i_save             = 'A'
          is_variant         = variant
          it_events          = events[]
        TABLES
          t_outtab           = t_ut
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " DISPLAY_DATA

  • How can I find out the screen size of the users moniter using the Acrobat SDK?

    How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
    Thanks,
    Gregory

    Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
    Gregory

  • I cannot use my iTunes account because I do not remember the answers to the security questions. How do I find out the answers to the questions or can I reset the questions

    I cannot use my iTunes account because I do not remember the answers to the security questions. How do I find out the answers to the questions or can I reset the questions? I also do not have a back up email on my account

    Click here for information. If you can't get the answers emailed to you for some reason, contact the iTunes Store staff via the link in that article.
    (75970)

  • How can we find out the disk which is used for a mount point

    How can we find out the disk which is used for a mount point?
    one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
    I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
    $errpt|more
    IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
    DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
    OS version:AIX 6.1
    DB:11.2.0.2

    this is the output for cat /etc/filesystem
    /u02:
            dev             = /dev/fslv00
            vfs             = jfs2
            log             = /dev/loglv00
            mount           = true
            options         = rw
            account         = false
    /u01:
            dev             = /dev/fslv01
            vfs             = jfs2
            log             = /dev/loglv00
            mount           = true
            options         = rw
            account         = false

  • How do I find out the size of a file, trying to make a DVD and told the fil

    Made a slide show project with music and trying to write to dvd. Computer tells me the file is to large and to use a dual sided disk. I cut may slides out but no luck. How do you find out the file size?

    Hi
    And SlideShows has a limit of 99 slides per show.
    I rather assemble mine in iMovie HD 6 where as QuickTimeKirk states
    it only has Time as a limit dep. on encoding method selected and if Single or Double layer DVDs
    Single Layer (for DL double time) - TIME includes menu - keeping it simple gives more to movie.
    (I prefere "Brushed Metal" no audio, no animation.)
    • Professional Quality (movies up to 120 min.) - BEST
    • Best Performances (movies less than 60 min.) - High quality on final DVD
    • High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
    Yours Bengt W

  • Is a way to find out the encoding of a String?

    Doesn anyone know how to find out the encoding?

    There are some circumstances in which a file (or more
    generally, a stream) may expose its own encoding,
    IIRC. But of course that's the exception, not the rule.As part of a higher level protocol, sure. HTTP, for example, may have it in a couple places (headers or in the HTML head section). Plain text files do not, however.
    But anyway at this point I'm not convinced that
    anyone knows for sure what the OP wanted or needed.I agree with that. Not convinced the OP knows, either.
    Was he really looking for a heuristic to correctly
    y guess the encoding of a stream of bytes, so that
    encoding could be used as input to a String
    constructor? Or did he just not know how to use the
    API?To the OP:
    If you have a String, there's no encoding, it's all Unicode chars in the string.
    If you have a bunch of bytes (byte[], file, input stream, whatever), then there is some encoding. If you don't know what the encoding is, there's no 100% sure way to figure it out. Some code exists, as mentioned, that can make educated guesses, particularly if you know it's one of a few possible choices. Beyond that, bytes are bytes are bytes, and how they are interpreted by character based classes/methods (like new String(byte[], String)) is defined by the encoding you tell it to use.
    So aside from that, what's the issue you're trying to solve?

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

    How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it!  Thanks..

    Or if you want to grab all the paths programatically, try the attached VI.
    Open the top level that you want all the paths from and close all others, then open the
    attached and run it. It will return an array of all the VIs that the VI
    in question uses, including vi.lib VIs. You can filter these as well if
    you like.
    Ed
    Message Edited by Ed Dickens on 08-01-2005 07:01 PM
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
    Attachments:
    Get all paths.vi ‏29 KB

  • How do i find out the tables effected in a schema after a particular time stamp

    how do i find out the tables effected in a schema after a particular time stamp?
    pls email in [email protected]

    If you are doing a reload every time then you can issue following commands to clear data from cube.
    lmt name to all
    allstat
    clear all from <cubename>prttopvar
    You can wrap above commands in pl sql procedure using dbms_aw.execute package and execute it before cube load starts. Instead of clearing it from whole cube you can clear only from one partition also. Just take a look at clear command in olap DML 10.2 reference.
    Thanks,
    Brijesh
    Edited by: Brijesh Gaur on Aug 10, 2010 6:47 AM

  • How do I find out the name of an area menu?

    I can see a report with a specific t-code in an area menu, how can i find out the name of the area menu, when i need to edit it in se43?

    Do a where used list for the tcode in SE93. select area menu in the list.
    Regards
    Sridhar

Maybe you are looking for