How do I eliminate the message "If you exit now, 1 download will be canceled. Are you sure you want to exit?" when I close Firefox?

When I try to close Firefox, an error box pops up with the message "If you exit now, 1 download will be canceled. Are you sure you want to exit?" I click on "Cancel 1 remaining download." (The other option is "Don't exit.") But the next time I try to close Firefox, the message pops up again. What can I do?

You can check the Downloads folder in the Downloads Manager (Library; Show All Downloads) for unfinished downloads.
*https://support.mozilla.org/kb/Downloads+window

Similar Messages

How to enforce the message "Do you want to save changes?"

Hello,
How to enforce the message "Do you want to save changes?" when the user attempts to close a form after checking a non-database item (check-box).
All the other database items in the block are not updateable and only viewable.
After checking the non database item check-box, if the user tries to commit, then the system is saving the changes and call the appropriate procedure on save.
But if the user tries to close the window without committing, the form is not showing the message "Do you want to save changes?" since the check-box is a non database item.
How to enforce the message "Do you want to save changes?" in this scenario when the user tries to close the window?
Thanks in advance.
Cheers
Sri

This is a fairly common question in the forum. You will need to override the default exit form process and check to see if the checkbox is checked. You can do this in the Key-Exit trigger. For Example:
DECLARE
al_id     ALERT;
al_button NUMBER;
BEGIN
IF ( CHECKBOX_CHECKED('YOUR_BLOCK.CHECKBOX_ITEM') ) THEN
     /* Display an Alert here that asks, "Do you want to save changes?" */
     ...code here to set the properties of your alert...
     al_button := Show_Alert(al_id);
     IF ( al_button = ALERT_BUTTON1 ) THEN
        --YES
        /* Perform COMMIT Processing here...*/
     ELSIF ( al_button = ALERT_BUTTON2 ) THEN
        --No
        Exit_Form(NO_VALIDATE);
     ELSE
        --Cancel
        RAISE Form_Trigger_Failure;
     END IF;
ELSE
     Exit_Form;
END IF;
END;If you need more help with the Alert, please check out the SHOW_ALERT topic in the Forms Help.
BTW, what happens if all the user does is check the checkbox? No other changes have occured. What changes are you trying to process?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Suppress the message do you want to save the changes you have made

hi all
i have written a rollback
it clears my record
but gives me the message
do you want to save the changes you have made
i have written
:system.message_level :=25;
rollback;
:system.message_level=0;
but still it is giveing me the message
can you please tell me how to suppress this message
please help me
thanks
mandar

try in reverse

Every time I launch iTunes I get the message: "Do you want the application iTunes.app to accept incoming network connections" Any suggestions?

every time I launch iTunes I get the message: "Do you want the application iTunes.app to accept incoming network connections" Any suggestions?

Just fixed this on my machine, the easiest way to remove this pop-up assuming you are no longer needing that software to print is the following:
Open Finder
Go > Go To Folder...
Type In: "~/Library/Application Support"
Delete All Folders Named Kodak
Open System Preferences
Go to "Security & Privacy"
Click the lock and enter your admin password
Click the Firewall Tab
Go to "Firewall Options..."
Find KodakAiO
Right-click KodakAiOBonjourAgent or equivalent (I forget the exact name)
Click "Show in Finder"
Go Back to a folder and delete the Kodak Folder there.
Remove Kodak from Firewall Options by selecting it and clicking the " - " button the base of the list.
or
Open Finder
Go > Go To Folder...
Type In: "~/Library/Printers"
Delete All Folders Named Kodak
I'm going off memory, so If I forgot something let me know.

How do I stop the message "user name or password for iCloud is incorrect" from popping up 2 times in a row when i try to get mail from other accounts? thank you in advance

How do I stop the message "Cannot get mail. The user name or password for iCloud is incorrect" from popping up 2-4 times consecutively every time I choose MAIL on my iPhone 4, 7.1.1 I have to select "OK" 2-4 times each time before I can read other email accounts. I used to have an "@me.com" account which I think was automatically changed to an "@icloud.com account." I opened a new iCloud.com account yesterday because I could not figure out how to get in the old ones. I want to delete the original @me & original iCloud account. When I try to delete the account, they tell me my DOB is wrong. I just want those pop ups to stop. Thanks in advance for your help.

Hi Suzanne,
It sounds like you’re running into a password issue with an older Apple ID that’s setup on your iPhone, which is preventing you from removing an iCloud account from your device. Take a look at the article linked below, it outlines all of the possible ways to change an Apple ID password.
If you forgot your Apple ID password - Apple Support
After you enter your Apple ID, there are three ways you can change your password:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
So long,
-Jason

How do I eliminate the message when starting up PC - Apple Sync Notifier.exe – Entry Point Not Found – The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?

I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?

How to avoid the message "Do you want to save the changes you have made?"

i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?

hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A

When starting iTunes I always get the message "Do you want the application"... My firewall is on and incoming connections are allowed

When starting Itunes the following message appears every thime:
Do you want the application "iTunes.app" to accept incoming network connections?
I always click on Allow, but it doesn't help.
I'm not using the root user to work on my mac and turned the firewall on.
As mentioned on a website I already removed the /Library/Preferences/com.apple.alf.plist file, but it didn't help.

Found the solution:
I checked iTunes by executing the following command in a terminal window:
codesign -vvv /Applications/iTunes.app
I reinstalled iTunes because my result was different from the expected output:
/Applications/iTunes.app/: valid on disk
/Applications/iTunes.app/: satisfies its Designated Requirement
I logged in as a root user.
In /Library/Preferences/ I deleted
- com.apple.alf.plist
- com.apple.alf.plist.lockfile
(although I could not empty the trash bin due to the lockfile, you can after a reboot)
I clicked on the iTunes.app application and pressed command+i
In that window I allowed everyone to read/write
I've moved the application to the trash bin.
After rebooting the mac and logging in as a root user, I could empty the trash bin.
I made sure that my firewall was started again, and downloaded the latest version of
iTunes (currently 10.5.1).
Launching iTunes doesn't give any warnings anymore because it's auto-trusted by mac.
Hope this helps others.

How do I tell the CR DLLs to exit when I am done?

Post Author: AndersG
CA Forum: General
Ie (skeleton code)hr = m_Application.CreateInstance("CrystalRuntime.Application"); m_Report = m_Application->OpenReport(ReportPath, dummy); job->PrintOut(vPromptUser, vnCopies, dummy, dummy, dummy); m_Report->Release(); m_Application.Release();Should not CR know that I am done and unload the DLLs?

You can look at Adblock Plus.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started

If you exit now, 23 downloads will be cancelled. Are you sure you want to exit?

I get this question every time I exit firefox, even if I previously advised firefox to cancel the downloads.
Using Ubuntu 12.4 and Firefox 26

I tried that too.
Deleted everything manually, and cleared the download.
The exit firefox, get the wuestion asked whether I want to cancel the 30 downloads, Click on yes. Restart the computer. Start firefox.
Close firefox:
Do you want to cancel the 30 downloads?
And in the meantime 30 downloads have been startdd and the files are in the download folder.

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

SWF files are flash files, which are not supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/
If you want to play the file then the iSwifter or Skyfire browser apps might work (they don't work on all flash sites) but you won't be able to download it

How can I remove the messages list on imessage on ipad?

How can I remove the messages list on imessage on ipad?

If you want to delete messages from the list - Tap the Edit button in the upper left corner of the messages app - above the Messages list. Then tap the red circle next to the messages that you want to delete.
But ....if you are asking how to remove the entire list from the screen so that you can use messages in a "full screen" type mode, there is no way to do that.

Ever since I enabled iMessage on my Mac Airbook, I can no longer receive text messages from the iMessage people on my iPhone, only on my iMessage now!! How do I get the messages to reach both iMessage and iPhone??

Ever since I enabled iMessage on my Mac Airbook, I can no longer receive text messages from the iMessage people on my iPhone, only on my iMessage now!! How do I get the messages to reach both iMessage and iPhone??

We are suffering very similar issues when communicating from my iphone to a friend who has both iphone and iPad enabled.
As long as I reply to an existing text chain, then it is visible on the target iphone. If I SMS the phone number, it gets routed to the IPAD!! And NO, I should not have to disable imessage when I want to send an SMS!!

Removing a message (Do you want to save changes)

Hi all,
I have a screen (login), to let the user enter the user name and password then click the button (enter), but when the user clicks enter the message (Do you want to save changes) appear,
How to remove it??
Thank you very much
Tasneem

hi
is it db items or non db items?
clear_form();
or
search online for.
SYSTEM.MESSAGE_LEVEL built-inThere are 25 Levels of Message in an Oracle Forms.
How much cretical error or message is
0 -- all errors or message
1
2
25 -- don't shows any
If we don't want to show any error or message to the user then we assign 25 to message level as
:SYSTEM.MESSAGE_LEVEL := 25;Now, system will not show any message error to the user.
If i wanna show all the errors then assign it 0.
:SYSTEM.MESSAGE_LEVEL := 0; sarah

When closing the Form "Do you want to save changes" window

Hi
I have a Master-Detail form where in my POST-QUERY trigger i am changing the LOV non-database item field to some value. When I just select Master record(NOT in query mode) my detail records pop up in the detail block. This is done by EXECUTE_QUERY in WHEN-NEW-BLOCK-INSTANCE trigger in Detail Block. But when i close the form it asks me to save changes even though i haven't changed anything. I have this statement in POST-QUERY Trigger
SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD,:SYSTEM.TRIGGER_BLOCK,STATUS,QUERY_STATUS); This issue does not happen in QUERY-MODE.
I tried both Set_Item_Property('BLOCK.CODE',ITEM_IS_VALID,PROPERTY_TRUE); this property in the POST_QUERY and Set_Item_Property('item_name',VALIDATE_FROM_LIST,PROPERTY_TRUE); in QUERY-MASTER-DETAILS trigger but it didn't work.
please help
thanks

Hi!
I think, beause the message "Do you want to save the changes ..." has no error number,
you will not get to catch it on a form level on-message-trigger.
Better find out, why the record status changed.
- Look to a post-query trigger that fills or changes a database item
- change the Validate From List item Property to No
- check for a when-validate-item or post-change trigger on items with a lov that has the Validate From List item Property set to Yes
Regards

How do I eliminate the message "If you exit now, 1 download will be canceled. Are you sure you want to exit?" when I close Firefox?

Similar Messages

Maybe you are looking for