How do I enter a path with spaces

In creating a special mail alert there is an option to enter a file to execute. If I put the file in my C;/Program Files (86)... it wont execute because of the spaces. How do I enter the path and filename with spaces. YES, I have tried all sorts of "s and they don't seem to work. Can you give an example.

I usually find that if use the offered option to browse to the file using the browser/picker provided, all this is taken care of. Thunderbird will use a technique widely emplyed on the web, where spaces are encoded as %20. Other potentially troublesome characters such as slashes and colons will get similar treatment.
As an aside, 20 is hexadecimal for the decimal value 32, which is the standard value in ASCII and many other encodings for the space character. So %20 is a particular notation that advises that the character with hexadecimal value 20 is to be used.
In general "C:\Program Files\example\example.txt" ought to work too.
But your problem may be specific to the particular context. I have had a long standing issue where I want to send a link to a file on a shared network drive and the link sent via Thunderbird has refused to work as an active link. The recipient generally had to copy and paste the provided pathname. This seems to have resolved itself in a recent update of Thunderbird. If you're using an add-on then the problem may be inherent in that add-on, or in a rather obscure difficulty with giving the Thunderbird process access permission to work with local files.

Similar Messages

Tomcat as service : install path with spaces

I'm trying to install tomcat as service
but when I choose an install path with spaces
I mean smthing like "c:\program files\tomcat"
it doesn't work
I tried to modify the wrapper.properties file
with "" but it doesn't work
I even set the parameter wrapper.cmd_line with
a command line that works when launched for CMD
but the service doesn't start
any idea????

I found it ! (hope it helps)
wrapper.properties that works with spaces in the name
of the java directory and the tomcat directory
# $Header: /home/cvs/jakarta-tomcat/src/etc/Attic/wrapper.properties,v 1.2.2.1 2000/10/16 01:59:22 larryi Exp $
# $Revision: 1.2.2.1 $
# $Date: 2000/10/16 01:59:22 $
# jk_service.properties - a bootstrup file for the Tomcat NT service.
# This file provides jk_nt_service with the needed information to
# start tomcat at a different process.
# As a general note, the characters $( and ) are used internally to define
# macros. Do not use them!!!
# Whenever you see a set of lines such as:
# x=value
# y=$(x)\something
# the final value for y will be value\something
# Normaly all you will need to modify is the first two properties, i.e.
# wrapper.tomcat_home and wrapper.java_home. Most of the configuration
# is derived from these two.
# wrapper.tomcat_home should point to the location where you
# installed tomcat. This is where you have your conf, webapps and lib
# directories.
wrapper.tomcat_home=C:\Program Files\tomcat-3.2.1
# wrapper.java_home should point to your Java installation. Normally
# you should have a bin and lib directories beneath it.
wrapper.java_home=C:\Program Files\JavaSoft\JRE\1.3
#------ ADVANCED MODE ------------------------------------------------
# Make sure that you read the how-to before making too many changes.
# Defining where the service is going to put the standard
# output of Tomcat. This is where System.out.println and
# System.err.println goes to.
wrapper.stdout=$(wrapper.tomcat_home)\logs\jvm.stdout
wrapper.stderr=$(wrapper.tomcat_home)\logs\jvm.stderr
# Additions to the path. put here directories where you store DLLs for
# native methods etc.
wrapper.ld_path=d:\
wrapper.ld_path=c:\
# Defining the classpath. All the rows that belongs to the class_path
# property are concatenated to create the classpath for Tomcat.
# If you have additional locations that you would like to add to the
# claspath you should add a new wrapper.class_path=<location> line.
wrapper.class_path="$(wrapper.tomcat_home)\classes"
wrapper.class_path="$(wrapper.tomcat_home)\lib\jaxp.jar"
wrapper.class_path="$(wrapper.tomcat_home)\lib\parser.jar"
wrapper.class_path="$(wrapper.tomcat_home)\lib\webserver.jar"
wrapper.class_path="$(wrapper.tomcat_home)\lib\servlet.jar"
wrapper.class_path="$(wrapper.tomcat_home)\lib\jasper.jar"
# This is where Javac is located in JDK1.2.x
wrapper.class_path="$(wrapper.java_home)\lib\tools.jar"
# and a tribute to JDK1.1.x
wrapper.class_path="$(wrapper.java_home)\lib\classes.zip"
# This is the Java interpreter used for running Tomcat
wrapper.javabin=$(wrapper.java_home)\bin\java.exe
# This is Tomcat's startup class (the class that contains Tomcat's
# starting point.
wrapper.startup_class=org.apache.tomcat.startup.Tomcat
# This is the location where tomcat's server.xml configuration file
# is located.
wrapper.server_xml=$(wrapper.tomcat_home)\conf\server.xml
# The NT service uses AJP12/AJP13 to shutdown Tomcat. The
# wrapper.shutdown_port tells the service the identity of the port that
# is used by AJP12/AJP13.
wrapper.shutdown_port=8007
# Can either be ajp12 or ajp13 depending on your configuration.
# Default value is ajp12
wrapper.shutdown_protocol=ajp12
# This is the command line that is used to start Tomcat. You can add extra
# parameters to it but you can not remove anything.
wrapper.cmd_line="$(wrapper.javabin)" -classpath $(wrapper.class_path) $(wrapper.startup_class) -config "$(wrapper.server_xml)" -home "$(wrapper.tomcat_home)"

How to run cdb -c with a command that contains paths with spaces?

CDB has a -c command line option that runs a specified command, sort of like
cmd -c, I suppose. Here's what I need to run:
cdb.exe -c "!itoldyouso \"c:\Program Files (x86)\My Software\1.exe\" \"c:\Development\my-software\bin\1.pdb\";q" "notepad.exe"
Note that here I've tried escaping quotes around paths with \. No luck. I've also tried
^ and """ (triple quote). All I get is this:
0:000> cdb: Reading initial command '!itoldyouso "c:\Program Files (x86)\My Software\1.exe" "c:\Development\my-software\bin\1.pdb";q'
c:Program - ignored. The input name/address could not be resolved to a loaded module.
Files - ignored. The input name/address could not be resolved to a loaded module.
(x86)My - ignored. The input name/address could not be resolved to a loaded module.
Software1.exe - ignored. The input name/address could not be resolved to a loaded module. Could not find module c:program ^ Extra character error in '!itoldyouso "c:\Program Files (x86)\My Software\1.exe" "c:\Development \my-software\bin\1.pdb";q'
The command is passed to CDB correctly, but CDB itself doesn't know how to parse quotes.

Hmm,
!itoldyouso with spaces in path does not even work, when started inside cdb or windbg for me.
But something like this reports success:
cdb.exe -c ".reload /f /i \"'C:\Users\sammy\Documents\Visual Studio 2010\Projects\DebuggerStub\Debug\DebuggerStub.
exe'=0x6000000,0x1b000\"" notepad.exe
Microsoft (R) Windows Debugger Version 6.3.9431.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
CommandLine: notepad.exe
************* Symbol Path validation summary **************
Response Time (ms) Location
OK C:\Users\sammy\Documents\Visual Studio 2010\Projects\DebuggerStub\De
bug
OK C:\Windows\symbols\dll
Deferred srv*C:\Symbols\MsSymbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: C:\Users\sammy\Documents\Visual Studio 2010\Projects\DebuggerStub\Debug;C:\Windows\symbols\d
ll;srv*C:\Symbols\MsSymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
ModLoad: 007c0000 007e8000 notepad.exe
ModLoad: 77540000 77668000 ntdll.dll
ModLoad: 77460000 7753d000 C:\Windows\system32\kernel32.dll
ModLoad: 75c70000 75d36000 C:\Windows\system32\ADVAPI32.dll
ModLoad: 75f60000 76022000 C:\Windows\system32\RPCRT4.dll
ModLoad: 75ed0000 75f1c000 C:\Windows\system32\GDI32.dll
ModLoad: 77680000 7771d000 C:\Windows\system32\USER32.dll
ModLoad: 761d0000 7627a000 C:\Windows\system32\msvcrt.dll
ModLoad: 77720000 77793000 C:\Windows\system32\COMDLG32.dll
ModLoad: 75c10000 75c69000 C:\Windows\system32\SHLWAPI.dll
ModLoad: 749c0000 74b5e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.1830
5_none_5cb72f2a088b0ed3\COMCTL32.dll
ModLoad: 76920000 77431000 C:\Windows\system32\SHELL32.dll
ModLoad: 6f750000 6f792000 C:\Windows\system32\WINSPOOL.DRV
ModLoad: 76310000 76455000 C:\Windows\system32\ole32.dll
ModLoad: 76280000 7630e000 C:\Windows\system32\OLEAUT32.dll
(fc8.1738): Break instruction exception - code 80000003 (first chance)
eax=00000000 ebx=00000000 ecx=0015fa34 edx=775a5b44 esi=fffffffe edi=00000000
eip=775886ce esp=0015fa4c ebp=0015fa7c iopl=0 nv up ei pl zr na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
ntdll!DbgBreakPoint:
775886ce cc int 3
0:000> cdb: Reading initial command '.reload /f /i "'C:\Users\sammy\Documents\Visual Studio 2010\Projects\DebuggerS
tub\Debug\DebuggerStub.exe'=0x6000000,0x1b000"'
*** WARNING: Unable to verify timestamp for 'C:\Users\sammy\Documents\Visual Studio 2010\Projects\DebuggerStub\Debu
g\DebuggerStub.exe'
0:000> lm
start end module name
007c0000 007e8000 notepad (deferred)
06000000 0601b000 DebuggerStub M (private pdb symbols) c:\users\sammy\documents\visual studio 2010\projects\debuggerstub\debug\DebuggerStub.pdb
6f750000 6f792000 WINSPOOL (deferred)
So a backslash looks not so bad, else one can try to use a script-file with "-c" arg.
With kind regards

Creation of file that have path with spaces (on aplication server)

Hello all,
Does anybody know how to do this? When I try to save save file with path like
'/usr/sap/some dir/file.txt' than '/usr/sap/some' is being created (everything after first space is being cut). What should I do?

Hi Marcin,
you may surround the path with quotes ('').
I hope it helps. Best regards,
Alvaro

UNIX path AND Do shell script path with spaces

I am trying to building a interface with buttons to execute shell commands when the button is pressed. Below press button execute code.
I am new to AppleScript and Xcode and Interface builder. I have read different post referencing spaces but I still don't understand.
THIS COMMAND DOESN'T WORK IT'S SOMETHING TO DO WITH SPACES.
How would I fix this to work.
on clicked theObject
do shell script "rm /Library/Preferences/com.netopia.netOctopus\ Agent.preferences"
end clicked
This works (Below) no spaces in the path
on clicked theObject
do shell script "open /System/Library/PreferencePanes/SharingPref.prefPane/"
end clicked
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.6)
ALL Mac OS X (10.4.8)
ALL Mac OS X (10.4.8)

Camelot's explanation was good, but you don't seem to get it, so I'll take a crack at explaining as well.
First off, you need to understand what "do shell script" does and does not do. "do shell script" takes a string from AppleScript and passes it to a shell interpreter. It does not check in advance that this string makes sense. (That is impossible to do, in fact.) It just passes it along. The shell interpreter then converts the string into a command, or series of commands, and attempts to run them.
In AppleScript, quotation marks around something make that something a string. So, for example:
"rm "
is a string containing a letter r, a letter m, and then a space. Some commands can also return a string, which can then be stored in a named variable, as for example:
set a_variable to (the text returned of display dialog "Hi!" default answer "Some text")
When you wish to put two strings together in AppleScript, you use the & operator, as in:
"String 1" & "String 2"
In this example, there is no space at the end of the first string, and none at the beginning of the second, so the result is:
"String 1String 2"
All clear so far?
When a shell interpreter attempts to convert a string into commands, it has to split the string into pieces. A space signifies a break between pieces. In order to put a space into a single item, you can do a number of things. You can put the whole item in quotation marks (single or double), which is known as "quoting":
'/A/Path/With/A Space'
or you can put a backslash before the space, which is known as "escaping":
/A/Path/With/A\ Space
You can combine quoting and escaping if you do it right. For example, the backslash also lets you use a quotation mark inside a single item which is quoted:
"/A/Path/With/A Space/And/A\"Quotation/Mark"
There are further rules and substitutions that sometimes border on the arcane.
In order to simplify things, Apple created the command "the quoted form of". This command takes a string and returns a new string which is properly set up so that it will be just one item when split up for the command line. It will add quotation marks, backslashes, or whatever.
So, to put things together:
"rm " & the quoted form of thePath
is a way of saying to AppleScript "take the string in the variable named thePath, and quote it for the command line; then stick it on the end of a string containing an r, an m, and a space."
When you pass this to "do shell script", it will break things up in such a way that it hands thePath to the rm command, which will attempt to remove whatever is represented by thePath. (Adding the "-r" in there just tells the rm command "if this is a directory, get rid of it and all its contents". Otherwise rm will complain if the item is a directory.)
I think, however, you may just have the path wrong. In one of the spots where you gave the POSIX path, it had a backslash (\) at the end instead of a forward slash (/). As Camelot says, a forward slash means that the item is a directory and not a plain file. But if you really meant the backslash, it suggests that the item is a plain file, but has a space at the end (or some other character that mystifies the command line). It's an escape.
Try making a new script in Script Editor which says
">" & (the POSIX path of (choose file)) & "<" at the end, that's the culprit.
(And if it won't let you select the file when you run the script, it means that the item is actually a folder.)

Enterring Wifi Password with spaces on printer

We are trying to set up our new Officejet 4630. Our network password contains a space between two words. How do I enter a space on the keypad on the printer?? I am having trouble connecting using the software from my computer so I'm trying it directly on the printer. Please advise as quickly as possible.

Hello @Robinmin,
Welcome to the HP Support Forums!
I would like to assist you today with entering a wireless password with a space in it on the front panel of your HP Officejet 4630 e-All-in-One Printer. Please follow the steps below.
Be aware that special characters (&*$%@#) and spaces may cause wireless connectivity issues. Therefore, if the setup fails after manually entering the password, you may have to alter your password to eliminate the space.
On the front panel of your printer select the down arrow until you see Wireless
Select OK on wireless
Down arrow to Wireless Setup Wizard
Select OK on Wireless Setup Wizard
Select OK on your Network Name SSID
When prompted use the number pad to enter the password. The password is case sensitive.
For the space you would need to hold the pound sign (#) button for a moment. Then tap the # to select the second option. The image for the space is beside the # pound sign on the button in red above. Release the # button once the space is highlight. Then proceed with your password.
Please respond to this post with the result of your wireless setup. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How do I mask a path with a blending mode so that if only effects the groups below?

I am working on a logo but have run into what seems like a simple problem but nothing about masks that I have found seems to work. I have
two groups and in one of them I have a path with an overlay blending mode. Above both groups I have the same path with the same blending mode. (I have used two as I wanted a stronger effect on the lower group)
Here is the project against white:
As you can see the logo itself looks fine and I thought it was ready to use.
However upon exporting it I noticed that the layers with opacity that where invisable agaist the white where now visable. I ussumed this would eb a simple fix as I am used to this problem with After Effects. Illistrator is not my forte and I am not used to how the masks work.
After two hours of messing around and searching on the internet for answers I have given up. This must be a common thing to pop up but I couldn't find the answer so here I am. Please can someone help me remove the unwanted white circles.
Thanks,
Ben.

Thank you for replying Monika,
I have copied the Paths but dont understand what you mean by expand the 3D effect. With the text I was able to click ungroup and edit the individual sides. I am unable to do this with the logo, I dont know exactly why. Also when I combine all my paths they just go into one group. You will have to excuse me, I still have a lot to learn.
Thanks,
Ben.

How to make a Beziere path with REC.

I'am tring to follow a flashlight with a particle emmiter. I want to make a beziere path with different points across the timeline using the REC mode. And then attach the particle to the path so it can follow correctly with speed and curves the flashlight. How do i do this?

Kyle,
Presuming you wish to move one circle to snap to another circle at a certain predetermined angle, and you have it placed at a distance at that angle you may (Smart Guides are your friends):
1) Select both circles, and with the Line Segment Tool drag a line from centre to centre (Smart Guides say center when you are at the first one and close enough to the second one);
2) Select the circle to move with the normal Selection Tool, then hover over the spot where the line crosses it (Smart Guides say intersect), then ClickDrag along the line (Smart Guides say path) until you have dragged it to snap to the other circle (Smart Guides say intersect).
This works whether the circles are beside each other or one is inside the other.
When moving vertically or horizontally, there is no need for the line, and you can just ClickDrag by the relevant Anchor Point.

How to configure the virtual path with our web listener

Oracle Apps Version: 11.5.10.2
Oracle database: 10.2
platform: Windows server 2003
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.

Hi,
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Do you mean (Patch 6194129)? How do you get this error? Is it at the beginning or the end of the installation?
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Please make sure you source the application env file before applying this patch, and select 8.0.6 ORACLE_HOME.
Thanks,
Hussein

How to make a complex path with circles and pathfinder

So I keep seeing this method of design on sites like dribbble or behance but I don't know how to do it!
Here's an example:
Basically a bunch of circles are used to create this awesome shape and design. I have a general idea on how to use the pathfinder tool and I have used it a lot in the past, but how do you snap circles together with smart guides? It seems that the smart guides only snap based on 90 or 45 angles and don't snap edges of objects together unless there are two anchors.
Here's an example:
I want to use the curves from 2 circle shapes to make a complex path. But I can't get the two paths to snap together
Ultimately to create something like the raindrop image above. I want to use the perfect curves on circles to create more complex shapes but since the paths do not snap together, I'm just eyeballing it to be close enough to do something with the pathfinder tool. I have tried many ways to solve this but I cannot figure anything out.
Kyle

Kyle,
Presuming you wish to move one circle to snap to another circle at a certain predetermined angle, and you have it placed at a distance at that angle you may (Smart Guides are your friends):
1) Select both circles, and with the Line Segment Tool drag a line from centre to centre (Smart Guides say center when you are at the first one and close enough to the second one);
2) Select the circle to move with the normal Selection Tool, then hover over the spot where the line crosses it (Smart Guides say intersect), then ClickDrag along the line (Smart Guides say path) until you have dragged it to snap to the other circle (Smart Guides say intersect).
This works whether the circles are beside each other or one is inside the other.
When moving vertically or horizontally, there is no need for the line, and you can just ClickDrag by the relevant Anchor Point.

How to read multiple arguments separated with space in one line

How to modify the
public static void main (String[] args){
}so that it can read multiple arguments separated with space in a single line?
e.g.
java myprogram username password host
java myprogram2 ipaddress port
Thx.

public static void main (String[] args){
int index = 0;
for(String arg : args) {
System.out.println("args["+(index++)+" = "+arg);
}

How can I calculate the characters with spaces in a document on pages

I'm currently using pages to write my personal statement up on, although i need to keep my characters including spaces under 4000 characters and also have no more than 47 lines. I've found how to do a word count and find how many charcaters I've used, but i can't see anywhere the information that I actually need to find! Someone please help, thankyou

How can you calculate the number of lines if you don't know how many characters there are to a line?
This is 2013. We are using word processors with real fonts, not terminals or teletypers or typewriters.
If you must have 47 lines then shrink the point size of the font until it fits.
Peter

Satellite NB10-A-10N - How do I enter special symbols with the keyboard?

Unfortunately my Toshiba NB10-A-10N doesn't have an integrated numeric keyboard which would be useful to enter signs/symbols by alt plus the appropiate number.
How can I anyway, using my normal german keyboard assignment, enter for instance: (without switsching the keyboard to spanish assignment)?
Is there any way?

If you have notebook offered on German market you will get it with Windows on German language and German keyboard layout.
Of course you can change keyboard input language and set it to Spanish.
Open control panel > Region and Language > keyboard and language.
If you want to use Spanish language only remove all installed services and add Spanish only.
You can also use Spanish and German but set Spanish as default input language. It is your choice.

How to delete file from server with space in name

I am a novice, learned a little several years ago, but have to start all over again.
I have set up the remote server (upload.comcast.net) without problems. I am unable to delete a file (file error:). I was able to upload the file, but cannot delete it. I figured out that that filename has a leading space. Now it's up on the server, but I cannot access it.
Experiment:
On the local folder, I deleted the leading space, and was able to upload, and delete it successfully. The original file remains unaccessible on the remote server.
Thanks,
Sonny

Thanks for getting back so fast.
Here is the error:
/_4230151.ORF - error occurred - An FTP error occurred - cannot delete remote file _4230151.ORF. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured
As I mentioned before, I don't think that there is an authorization problem, as the changed name works fine, as does index.html
What I do find interesting is that I was able to upload the file with the leading space. If I remember from several years ago, such a file would not even upload.
I shutter to think of contacting Comcast. I think that they just give us the space with internet cable, but we are on our own with the website. Do you think that there might be some way to erase everything? I have only index.html up there, and don't mind starting over again.
Sonny

How to execute a application folder with space

Hi All,
Can any one help to execute the application folder or a file that contains space.
Below I have pated my sample coding:
var myFile=new File("/E/test text/lanch.app");
myFile.exceute();
If I remove the space between "test test", it works perfect.
Request advice.
Thanks,
Christober

Hi,
Run this:
alert (mFolder = Folder.selectDialog());
and notice how "spaced name" is alerted by your OS;
Jarek

How do I enter a path with spaces

Similar Messages

Maybe you are looking for