How do I establish a dial-up connection in Labview to FTP files (I have the internet connectivity toolkit)?

I'm writing an application that will automatically update files on a server, using the internet toolkit's FTP vi's. It works fine with a LAN, but I'm not sure how to establish a dial-up connection via a telephone modem.
Ultimately, I'd like the program to dial-up, connect, ftp files, then hang up. So far I have used AT commands through the serial compatiblity vi's to dial up and logon to a local internet provider. The provider then spat out an IP number and an MTU number (1524), followed by periodic spurts of garbabe.
Any help in getting to the next level would be greatly appreciated.
Thank you,
Tom

Tom,
You CANNOT dial-up to the ISP using the Internet Developers Toolkit. The toolkit assumes you already have a valid TCP/IP connection. However, many web browsers such as Netscape and Internet Explorer have auto-dialing options that will start dial-up networking automatically when you launch your browser. The only trouble is that the auto-dial wizards can require the user to push buttons, but there is a Shareware program called DUNCE which will take care of the button pushes for you in the auto-dial wizards so the user does not have to intervene in the dial-up process. You can recommend to the customer that the lauch their browser from LV and then have the browser configured for auto-dial and that should take care of the problem. I did not actually try this o
ut myself, but in theory it should work.
Zvezdana S.
National Instruments

Similar Messages

Cannot connect to iTune store... even after the internet connection is working fine... plz help...

cannot connect to iTune store... even after the internet connection is working fine... plz help...

Same here, also cannot access the App Store. Internet connection is good. Iam on a Mac

How can I get a preloader to launch a main (external) swf file, and have the main file remove the preloader once it's fully loaded?

Using Flash MX, ActionScript 2:
I’ve been struggling for several weeks, trying to get a preloader to work on a large (~80 MB) photo portfolio file (using the method where the preloader is on frame 1 of the file, and when loading is completed, it jumps to the content). I’ve done countless tutorials, and none seem to work on my presentation. I even tried downloading a trial version of CS4 so I could export every one of the file’s library movie clips and images so that they load on Frame 2 (a feature MX doesn’t have). It takes about 20 seconds for the .exe to load from a CD, and no matter which preloader construction I use, it always seems to appear in the last few seconds before the movie loads completely. During the initial wait time, there’s no indication that anything is happening: no hourglass on the mouse, and not even a blank screen. This is only true for the first time that the file is loaded from the CD; on subsequent loads, the file must already be in RAM, because it loads within a few seconds.
I decided that I’m going to try and make the file which the user clicks on (one named Windows_Portfolio.exe or another called Mac_Portfolio.hqx) the preloader so that it would be tiny, and would load instantly. I want that file to launch the external huge portfolio file (renamed files.swf), keep track of its loading progress, and cycle through a slideshow (10 thumbnail images that transition into each other over 100 frames) proportionally, based upon the percentage of files.swf that had been loaded.
I assume that there should be a loadMovie() or a loadMovieNum() command on the preloader’s timeline to launch files.swf, and that the initial code of files.swf should have some sort of this._parent._visible=false or other way of deleting the preloader on level0. Can anyone explain the steps to me, or direct me to a good Flash MX tutorial that explains how to launch another external swf from a preloader .exe, keep track of its load progress, and delete the preloader .exe once the external swf had been loaded?
Also, I’ve read that, using this construction on a CD, every file has to be in the same place, and that I can’t nest files.swf in a folder named “files,” and reference it with files/files.swf. Is this true?
Thanks for any assistance you can offer.

If you know JavaScript (ECMA Script) then you might be able to get it done applying a for loop and a random function
to the for loop if you know how to get a page-loaded request into JavaScript.
But an easier solution, if you know ActionScript 3.0, and if your SWF's don't need to be recoded and can load into a "container" SWF would be to create a master FLA file that loads your SWF's in a random fashion using Math.random() as a multiplier, though you won't see much variation if you only have 2-3 SWF's to load--if you had more than that then you would begin to benefit from the random function's capabilities. In ActionScript 3.0 use the load() method along with addChild() to load the SWF and add it to the stage. You will be able to search for specifics on how to code the FLA properly by using Flash's Adobe Help tool and also using an internet search.
-markerline
P.S. Once you have the master FLA coded you can Publish it to an SWF and an HTML and if the container/master SWF needs to be in a page with other content you can simply copy and paste the object and embed tags for the container SWF from the published HTML into any place on your master HTML that you need it to reside. You can then use CSS to control placement of the SWF object if it is in a div tag.

I get a message that says "The proxy server is refusing connections" that will not allow me to use the internet

I am attempting to connect my laptop to my home network. The internet connection works (I loaded up cmd and pinged yahoo with good results). But it is telling me that "Firefox is configured to use a proxy server that is refusing connections."

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
If you do not need to use a proxy to connect to internet then select No Proxy

How do I add to my data plan on the iPad once I have run out of time and no longer have an internet connection?

How do I add to my data plan on the iPad once I have run out and no longer have an internet connection? I am working out of the country and got a message that I was running low,followed immediatly by a you're out message.

Should you not be asking your carrier? They are the people supplying your data plan.

HT5704 My network connection is: HSDPA. I do not have a faster connection within 200km radius. Is there any way how I can download the iSO 6.1.3 to update my iPad?

My network connection is: HSDPA. I do not have a faster connection within 200km radius. Is there any way how I can download the iSO 6.1.3 to update my iPad?

Connect your iPad to iTunes on your computer.
http://support.apple.com/kb/HT4623 - Scroll down to Update your device using iTunes

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

HT5704 I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update

I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update?

Please download iTunes from Apple.com and then sync your ipad.After which your ipad will appear on the right hand side upper corner of iTunes.Select your ipad and click check for update,once update has been found click update and follow the steps after that.

HT1222 i want to update my ipod softwere but i have slow internet connection how can i will update my softwere esayliy from india.....

I have apple ipod touch 4th genration here new softwear avalable but in India I have slow internet connection how can update my softwear esay way........
here I have also my father's Iphone 4s...
then Can I copy softwear of iphone 4s and intall in ipod touch....

Each model device requires it's own download of the new iOS version as the update files are specific to each model.

How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues

I am connected to my usual wifi and when I try to go onto any apps which require internet connection, it says I have no internet connection yet I am connected to wifi, how do I resolve this?

I am connected to my usual wifi and when I try to go onto any app's which require Internet connection, it says I have no Internet connection yet I am connected to wifi, how do I resolve this?I have had this problem for about a week.
Any responses are appriciated

You posted in the iPad forum, but you profile lists an iPhone 4S. Does your iPhone or iPad have this problem.
Here's some iPad suggestions. Most also apply to the iPhone. Your iPhone or iPad may show the wifi symbol but that only shows the presence of a wifi signal. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT201272 I recently added my entire music library to the "cloud" for an annual fee. Now I can't listen to anything unless I have an internet connection. I want my library back on my laptop, the whole thing (original laptop got erased). How do I do this?

I recently added my entire music library to the "cloud" for an annual fee. Now I can't listen to anything unless I have an internet connection. I want my library back on my laptop, the whole thing (original laptop got erased). How do I do this?

Hello ggjsa,
Congratulations on your new laptop! I understand that you have copied your old iTunes Library to your new computer, but you are still not seeing the music. I recommend reviewing Part 5 in the section titled "External drive" in the following article:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
If you are still having trouble transferring the library using this method, you may want to try using the Home Sharing method in the article.
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am missing the internet connection icon under my systems. How do I get it back?

I am missing the internet connection icon under my systems. How do I get it back? I am trying to eliminate an unvalid gmail account and add my new gmail account for work. It exists already so I don't want to create one. I can't get my computer to switch from the unvalid account. Per YouTube I need this application to set up Safari to switch between accounts. Help please!

If you are on a Mac, you can connect to a network either using WiFI or an Ethernet cable. These are both available under System Preferences.
What are you referencing as 'Internet' connection?

How to switch off the internet connection via GPRS by iphone 3G

how to switch off the internet connection via GPRS by iphone 3G?
need help.
thanks

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

How to used the internet connection adsl on my com...

how to used the internet connection adsl on my computer by nokia n73 me
i whant used the adsl connection in nokia n73 me by Bluetooth or cable
and thank you

Hi Theo,
There are several ways to implement this using simple timing features of LabVIEW. Two fairly simple methods are comparing system time stamps or using the Wait VI provided in the Timing palette. The time stamp comparison requires a little bit more programming, but can be included in your main program loop. To use the Wait function, you will probably need to construct a new loop parallel to your main loop. I have attached screenshots of these two implementations. Please let me know if you have any more questions.
Donovan
Attachments:
WaitDelay[1].Png ‏5 KB
TimeStampFalse.Png ‏11 KB
TimeStampTrue.Png ‏11 KB

How do I establish a dial-up connection in Labview to FTP files (I have the internet connectivity toolkit)?

Similar Messages

Maybe you are looking for