How to used the internet connection adsl on my com...

how to used the internet connection adsl on my computer by nokia n73 me
i whant used the adsl connection in nokia n73 me by Bluetooth or cable
and thank you

Hi Theo,
There are several ways to implement this using simple timing features of LabVIEW. Two fairly simple methods are comparing system time stamps or using the Wait VI provided in the Timing palette. The time stamp comparison requires a little bit more programming, but can be included in your main program loop. To use the Wait function, you will probably need to construct a new loop parallel to your main loop. I have attached screenshots of these two implementations. Please let me know if you have any more questions.
Donovan
Attachments:
WaitDelay[1].Png ‏5 KB
TimeStampFalse.Png ‏11 KB
TimeStampTrue.Png ‏11 KB

Similar Messages

Pc & Laptop: How to share the internet connection via Bluetooth?

Hi,
I've recently bought a laptop and i'm having trouble figuring out how to share the internet via bluetooth from my desktop pc. I can connect using the Personal Area Network (PAN) but i'm not sure how to send the internet. whatever i've been told to try so far as all failed.
i'm sure this questions been asked quite alot, so i'm sorry to ask again)
could someone tell me a step by step setup?
(Thanks, It's much appreciated)

Hi
Its takes longer to describe the full installation how to use the BT for internet sharing.
I have found this website with a installation instruction for Windows 2000.
The dialogs for Windows XP might be a little different, but the configuration will be the same.
http://www.geekzone.co.nz/content.asp?contentid=1285
However, check it. Its useful.

How to use the current connection when calling db procedure ?

dear all,
Am using Jdevleoper 11.1.1.3 ,
I have a java class that call a database procedure , now everything is going fine with me but a bit slow bcoz am openning a new connection I think it would be definitely faster if am using the current connection
so how can i re-write my code so i can use the current connection istead of defining a new connection to the DB :
public void DeleteApp (int PAppNo){
String username,password,thinConn;
username = "ACC";
password = "ACC";
thinConn = "jdbc:oracle:thin:@..."
try {
DriverManager.registerDriver(new OracleDriver());
Connection conn = DriverManager.getConnection(thinConn, username, password);
CallableStatement cs = conn.prepareCall(" { call myprocedure(?,?,?) } ");
cs.setInt(1,PAppNo);
Thanks for all,
Lama

Delta,
You shound NOT be doing JDBC calls from your UI project. You should put the code as a service method in your application module, expose the service method to the client, and then call it through the binding layer from your UI http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcservices.htm#sm0212
thx John & timo but u always post the same reply at the same time for my questionsTimo and I have been around long enough that we recognize the questions that have been posted 9,461,293,811 times before and know the stock answers, and know where in the documentation the answers are given. As you appear to be new to ADF, I'd strongly recommend reading the Fusion Developer's Guide (skim it once and then read in detail the parts that interest you). As I've said before, so many of the basic (and not-so-basic) concepts are covered in there. Once you've skimmed it in enough detail, then the next time you have a problem, you might not know the answer, but you'll remember, "ah, I think I read something about that before, let me check..."
John

How to keep the internet connection alive?

Hi, I am a new Macbook user and everytime my computer goes to screen saver or sleep mode it keeps losing the internet connection. Is this normal? Is anyway to keep the internet alive even is the computer goes to "sleep mode"?
I mean, it is quite a pain to keep signing in at messenger everytime I wake up my computer or come back from screen saver
Thank you

I do not know of a way. When your computer goes into sleep mode, it basically shuts itself down and stores everything in memory. Nothing is moving or working because the whole point of sleep mode is to conserve the battery. If it is really bothering you, go into System Preferences and change the amount of time it takes for the computer to go to sleep.

How to fix the internet connection on itunes

Everytime I run the diagnostics it tells me that the internet connection test and the secure link to itunes store test has failed. And when I try to go to the itunes help it says I need internet connection to do so. My internet connection is fine though. Any ideas on hwo to fix this? I even tried uninstalling and reinstalling itunes.

PROBLEM SOLVED.
Another web site tipped me off. Here is their fix:
We figured out a way to get around this latest set of errors, for Vista users.
Go to itunes. By default, it installs to c:\program files\itunes. (the shortcut link will not work).
Right click on the file, and go to properties.
Click on the compatiblity tab.
Click on the checkbox for run this program in compatiblity mode for:. By default it will go to Windows XP (Service Pack 2). That is fine.
Click ok, and then run Itunes. That allowed us to access the Itunes store.
SOURCE: http://www.geekstogo.com/forum/iTunes-could-not-connect-to-iTunes-Store-t144947. html&st=15

How to use the database connection bean??

hi,
i was created a database connection class. can teach me how to call the class at JSP.
thanx...
<jsp:useBean id ="dat" class ="Database" scope ="request"/>
     String sql = "INSERT INTO table"
           "(standard,col )" +
           " VALUES " +
                                            "('a','kk')";
     public static Connection getConnection()
         throws ClassNotFoundException, SQLException
          // Load Sun's JDBC-ODBC Bridge
          Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
          // Make a connection to JDBC-ODBC Bridge drive with
          // the connection URL, jdbc:odbc:DSN
          String url = "jdbc:odbc:miniproj";
          return(DriverManager.getConnection(url, "anonymous", "guest"));
     public static int executeUpdate(String nonSelectQuery)
         throws ClassNotFoundException, SQLException
          return(executeUpdate(getConnection(), nonSelectQuery));
     public static int executeUpdate(Connection conn, String nonSelectQuery)
         throws ClassNotFoundException, SQLException
          return(conn.createStatement().executeUpdate(nonSelectQuery));
     }

NOTE that you should always have your classes inside packages. Some versions of Tomcat won't use them correctly otherwise.

When I'm out of range for Wi-Fi on iPad, can I use the Internet connection from my iPhone 5?

I only get Internet on my iPad when I have my wireless router. When I'm out if range can I piggyback with my iPhone5? If so, how.

Yes, you can use the hot spot feature of the iPhone 5 to create a WiF Access Point.
See here in Chapter 33 Settings http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

IMac Stops Using the Internet Connection

While browsing, my iMac will suddenly stop communicating with the internet. AirPort, Chrome, and all Mac software are working fine, it just "forgets" how to connect. It shows everything is as it should and is still connected to my home network, but won't operate at all. The only solution is to reset from Time Machine. Anyone else have this problem?

Best way ti fix it !
iMac and MacBooks have the ( PHY Mode:    802.11n ) as standard
there not supporting 802.11g or other types
what you need to do
go About this Mac > More Info... > Overview > Than > System Report..
Than from the lest under Network - Wi-Fi
you will get report about your network Interfaces ,
your router name here :
PHY Mode:    802.11n
BSSID:    bc:76:70:5d:c6:a7
Channel:    7
Country Code:
Network Type:    Infrastructure
Security:    WPA2 Personal
Signal / Noise:    -74 dBm / -101 dBm
Transmit Rate:    52
make sure that your router setting on your router match the machine
in example the router set on : Mode:    802.11n only !
and Security:    WPA2 Personal
after that you mac will work faster and smooth
why is that happened ?
when your router set in auto mode , if any other pc or laptop join the network the router will change the mode from 802.11n than your mac will lose the connection setting and you will need to refresh the network
agin and agin and agin .
make sure you buy good router that support 802.11n
very easy job takes me 1 year for find it and no one have the right answer on the net

How to use the camera connection kit for iPad 3rd generation?

Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...

This is how you use it.

How to use the Portal Connection Service in a standard J2EE application

Hi,
We want to use portal connection service to connection backgend system from a standard j2ee application.
But the connection need a connectionProperties object which is created in this way:
ConnectionProperties connectionProperties =
new ConnectionProperties(
request.getLocale(),
request.getUser());
Because the "request" object is IPortalComponentRequest object, which is a portal object. In our standard application, we can use this way.
So how?
Thanks and Best Regards,
Xiaoming Yang

Does anybody has any idea? Many thanks and points will definitely be awarded.
Best Regards,
Xiaoming

I seem to have some kind of virus. When I use the internet a pop up consistently comes up when I click any link, and on Facebook I get new ads put next to people's photos.

I need to know how to remove this virus for free.

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

ARD over internet to multiple macs using the same connection

Hi, I know the topic has been covered to enable ARD over the net, however all the solutions I see require port forwarding which in essence makes only one computer using the internet connection available, how do you make it so multiple macs can use the one internet connection to send/receive ARD requests? is there a way to change the port ARD uses on individual macs and then forward the ports ? or do I have to go down the VPN path ? or is there a better solution for this kind of setup, thanks Ash

Precisely.
Cheers, Joel
\[ Note, the reason I didn't use 5900 and 5901 was for clarity to make it obvious that they are arbitrary choices on the external side, but also because sometimes using 5901+ gets confusing. Depending on your VNC server software, which port on the internal side that you choose to use between 5900-5920 actually means something (resolution, color depth, etc) to the server software. If you can keep it all straight in your head though, and point them all to the right internal port (5900 usually), no harm in it. If you don't mind adding some awful "security through obscurity," you probably shouldn't have VNC service open to the internet on 5900 anyway. Either way, you should also probably limit connections to those internal machines now that they are "directly reachable" from the 'net. In your firewall they should both have default-deny policies for incoming requests unless they're from your known-safe external addresses.]
Message was edited by: Joel D. Reid

Does GPS use the internet data connection?

Hi everyone,
I'll be using a German iPhone while traveling all over the world. The data connection is free within Germany (in other words, flat-rate internet) but quite expensive out of the country, 49 euro cents per 50kb block when I'm in the US, for example... I was hoping to use the GPS/map function a lot, but I'm afraid this will be expensive...
Does the GPS/map function actually use the internet connection, for which I'll be charged per 50kb block?
Or is GPS a separate kind of connection?
I was hoping to just casually surf the web while traveling on trains across the globe, but I guess that would be a very expensive pastime...
Thanks!
Alexandra

There is no charge for accessing GPS, but maps data is not stored locally on the iPhone. When using the Maps application, all maps data is downloaded from the internet - via an available wi-fi network you have access to, or via the cellular network. You can access GPS alone without a wi-fi or cellular connection, but it won't do you much good without any maps data.

Setting-up the Internet Connection

Hi All, my systems has the following Linksys products:
modem - ADSL2MUE
wireless router 1 - WRT54GS (1st floor)
wireless router 2 - WRT54G (2nd floor)
switch - SR2024 (for cable connections)
I was able to connect all the PC to the internet. My problem is I could not make all the PC be in same Gateway number in which I could not share the network printers and files to all PCs. Is there any way to solve this problem? Below are settings to each device:
ADSL2MUE - Bridge Mode only
WRT54G - IP Address (192.168.1.1), PPPoE
WRT54GS - IP Adress (192.168.2.1), DHCP
* ADSL2MUE Internet Port is connected to WRT54G Internet port
* WRT54G Ethernet Port 1 is connected to SR2024 Ethernet Port
* WRT54GS Internet Port is connected to SR2024 Ethernet Port
* Printer 1 is connected to SR2024 Ethernet port (2nd floor)
* Printer 2 is connected to WRT54GS Ethernet Port (1st floor)
* All PCs in the 1st floor is using 192.168.2.1 gateway number thru WRT54GS wireless connection.
* All PCs in the 2nd floor is using 192.168.1.1 gateway number thru WRT54G and SR2024.
I need your help on this.
Best rgds, joven

It does not matter how you set the internet connection type on the second router when nothing connects to the internet port. The internet connection type is used for the configure of the connection through the internet port. As nothing is connected in the internet port the setting is basically inoperable and makes no difference whatever you set there. You should not set a static IP address as that may affect the routing tables on the router even if the internet interface is down. Thus, just leave it on Automatic/DHCP and it should be fine.

Nokia C3 - To interrupt the Internet connection?

Please how to interrupt the Internet connection? After the off-switch on the phone always online.
Thank you very much.

have you email set up on your phone ?
Menu > Settings > Connectivity >
Packet data > Packet data connection
When needed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to used the internet connection adsl on my com...

Similar Messages

Maybe you are looking for