How do i execute a stored procedure?

1. how can i see the list of stored procedures i might have in an oracle database from sqlplus?
2. say i could see a stored procedure called my_procedure, how can i see the code in this procedure?
3. how can i execute it from sqlplus?
thanks u very much.
- asker

I ignore your statements fully. I have a joke here.
There is one fools' gang in a city and they want to prove that they are not fools. One of them says " If we can find the most intelligent man in the city, then we can no more be called fools." Then on one fine morning, one of the fools sets out on a search. He goes to a taxi-driver and asks him to take him to the most intelligent man in the city. Taking advantage, the taxi fellow roams around the entire city for the whole day and end of the day brings him to the same spot where he met him in the morning.
Taxi driver says, "Sir! I've not seen anyone who is more intelligent than me in this whole city. To prove this, I ask you a question and you answer me. If you can't answer me, then I'm the most intelligent in the city." Even the fool agrees on this and the Taxi driver continues saying, "We are four in our house. My mother, my wife, my son and who is the fourth one?". The fool couldn't answer that and the taxi driver says "The fourth one is me". the fool accepts his ignorance and sets off from the place to their fools-community gathering.
In the gathering, this folls explains other fools about his achievement and says that the taxi-driver is the most intelligent in the city. When other persons insist on how he had come that conclusion, he asks the same question to his community as says, "We are four in our house. My mother, my wife, my son and who is the fourth one?". The other fools fail to answer and ask for the answer excitedly. This fools replies, "The taxi driver".
In the same way as the fool, if I give direct answer to the question, the OP doesn't know the logic behind the answer and then just blindly remembers the answer rather than learning. That is the reason I insisted on doing some search before giving a solution.
Have a nice day ahead.
And yeah! Neither the number of posts not you can judge my skills. Rest of the community knows.
Cheers
sarma.
Added the bolded text.
Message was edited by:
Radhakrishna Sarma

Similar Messages

How to execute an Stored procedure in SQLDeveloper?

Hi
Thank you for reading my post
I want to know how i can execute an Stored procedure in SQL developer 1.1.0.21
for example those sotred procedure from HR schema.
one of them is add_job_history
when i click on it and select run i see a new dialog with some sql as follow:
DECLARE
P_EMP_ID NUMBER;
P_START_DATE DATE;
P_END_DATE DATE;
P_JOB_ID VARCHAR2(10);
P_DEPARTMENT_ID NUMBER;
BEGIN
P_EMP_ID := NULL;
P_START_DATE := NULL;
P_END_DATE := NULL;
P_JOB_ID := NULL;
P_DEPARTMENT_ID := NULL;
HR.ADD_JOB_HISTORY(
    P_EMP_ID => P_EMP_ID,
    P_START_DATE => P_START_DATE,
    P_END_DATE => P_END_DATE,
    P_JOB_ID => P_JOB_ID,
    P_DEPARTMENT_ID => P_DEPARTMENT_ID
END;I checked the help and it said i should replace =>P_emp_id with some number
I did that and i get error.
can some one give me a sample for executing this procedure?
thanks

Remove the NULL values with the data you want to use in the SP.
BEGIN
P_EMP_ID := 32;
P_JOB_ID := 'boss';
For the date you have to chose the approriate string....

Execute a stored procedure from a JSP.(Help...)

How can I execute a stored procedure from a JSP.
Wich tags I need to use ???
I'm using the oracle thin JDBC.
please help me.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Mario Bellido ([email protected]):
How can I execute a stored procedure from a JSP.
Wich tags I need to use ???
I'm using the oracle thin JDBC.
please help me.<HR></BLOCKQUOTE>
I just try a simple call with a data tag just like this (see category.jsp in the onlineorder example provided with Jdev 3.2.3):

<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<jbo:ApplicationModule configname="OnlineOrders.OnlineOrdersModule.LocalConfig" id="OnlineOrdersModule" username="BC4J" password="BC4J" />

<jbo:DataSource id="category" appid="OnlineOrdersModule" viewobject="CategoryView" ></jbo:DataSource>
<jbo:ExecuteSQL appid="OnlineOrdersModule" >
insert into tablejsp values ('testtable')
</jbo:ExecuteSQL>
<jbo:ExecuteSQL appid="OnlineOrdersModule" >
call testjsp()
</jbo:ExecuteSQL>
<jbo:Commit appid="OnlineOrdersModule" />
testjsp is a stored PL/SQL procedure without arguments.
null

How to execute a stored procedure/function in TOAD?

Hi, All ,
Can someone please tell me how to execute a stored procedure/function in TOAD?
I have tired
EXECUTE PROCEDURENAME(888), but it doesn’t work.
TOAD give me the error: invalid SQL statement.
Thanks a lot

Write PL/SQl block.
i.e Begin
Procedure name..
end;
Then it will be excuted.
Ashutosh

How to execute a stored procedure every 5 minutes in biztalk admin console

Hi
how to execute a stored procedure every 5 minutes in biztalk admin console without using biztalk orchestration
we need to update table data every 5minutes
please replay asap...........
thanks advance....

WCF adapter is best suited for the same. Use ‘Template’ feature of WCF adapter. Template is mainly used to add wrapper elements around the body of the outgoing message from send port.
Below mentioned post is perfectly suited for you.
http://social.technet.microsoft.com/wiki/contents/articles/19845.invoke-a-sql-stored-procedure-on-the-biztalk-wcf-send-port-without-needing-an-orchestration.aspx
Regards,
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to execute oracle stored procedure through php as externally?

hi...
i am searching for the way that how to execute oracle stored procedure through web service, i am using php and mysql, i have some stored procedures in oracale database, i want to execute them, from php, means the database will be remain mysql, and the stored procedures of oracle will be executed externally...
Kind regards,
Wilayat.

Ok, so first of all this is a kind of strange question. Since Oracle and MYSQL can happily live side by side.
Make sure you have the oracle client (instant or regular ) installed and OCI_8 is set up and working correctly in PHP. If it is, when you run the phpinfo() routine you will see oci_8 on there. IF PHP connects just fine from the command line yet apache wont connect check permissions and things like the LD_Library Path.
Then in php, right along with your MySQL statements run Oracle Statements eg:
<?php
$OraDB = oci_connect(name,pass,tnsname);
$MySQLdb = mysql_connect([parms]);
$oraQueryText = "begin sp_some_proc([some parms]); end;" ;
$mysqlQuery = " Some mysql Query";
$oraQuery = oci_parse($OraDB,$oraQueryText );
oci_execute($oraQuery);
mysql_execute([parms]);
?>
Use the standard fetch code to get data from either of them.
If you cannot and I mean absolutely cannot get an admin to link in OCI_8 then you still have recourse although it will be tedious as hell. PHP allows you to exec calls to the OS. You still MUST make sure the Oracle Client is installed and that sqlplus runs from the command line. You will more then likely have to have a shell script written to do this as well, but maybe not as I have never tried it with the exception of capturing the return value of sqlplus and you will have to dig into sqlplus to get it to send its results to a file you can then parse with php.
Good Luck!

How to check which user has the privilege to execute a stored procedure?

I am using Oracle 7 and I would like to check which user has the privilege to execute a stored procedure. How can I check it? Is there any view I can query for?
Alex Hung

Please check DBA_SYS_PRIVS.
SQL> select * from dba_sys_privs
2 where grantee='HARY';
GRANTEE PRIVILEGE ADM
HARY EXECUTE ANY PROCEDURE NO
....

How to execute a stored procedure with an out parameter ?

Guys I am struggling with executing a stored procedure from sql plus.I mean my stored procedure has 2 input parameter and 1 out put parameter (status of the execution).
MY_PROCEDURE(p_name in varchar2,p_age in number,p_status out varchar2)
end my_procedure;
When I say
EXECUTE MY_PROCEDURE('manohar','Shetty');
i get insufficient parameters errors.
please help.

EXECUTE isn't a valid PL/SQL construct. It's a SQL*Plus command. You don't want to put any SQL*Plus commands in a PL/SQL block.
You can always execute a stored procedure purely through PL/SQL
begin
my_stored_procedure( x, y, z );
end;SQL*Plus happens to give you the execute command so you can avoid the begin and end statements.
Justin

Incorrect Update Count by executing a stored procedure from Java

Hi Guys,
I am calling a stored procedure from the java program which is modifying the rows of a table. Now I want to know how many rows have been modified by executing the stored procedure. I am writing the following code for the purpose:
OracleCallableStatement stmt =
(oracle.jdbc.driver.OracleCallableStatement)con.prepareCall("{callsp_um_setForumID(?,?)}");
stmt.setInt(1,101);
stmt.setInt(2,666);
n = stmt.executeUpdate();
System.out.println(n + " row(s) updated");
This procedure is actually modifying the table(When I query the databse it has modified 1 row). But it is returning a value 0 and is printing "0 row(s) updated".
Is there a way by which I can find out the number of rows updated by executing the stored procedure?
Thanks
Sachin
[email protected]

I'm no expert on this, but I have a similar call where I fetch
an Oracle REF CURSOR from a call to a stored function. If you
fetch the cursor as an Object from your CallableStatement, you
can then cast it to a ResultSet e.g.
mystatement.executeUpdate();
ResultSet rs = (ResultSet) mystatement.getObject(1);
Then you should be able to loop through your ResultSet as usual.
Good luck!
Chris

Is it possible to execute a stored procedure using the JDBC adapter?

Hi all,
Can anybody confirm whether we can execute a stored procedure created in a database using the processing parameters of a JDBC adapter of a communication channel?
If yes, then please let me know how (may be with an example)
Thanks.

Yes, that is possible. You have to chose EXECUTE in the action field to execute the stored procedure. Here's a little piece on the JDBC receiver:
JDBC Receiver
For writing data to an SQL database you also need to define a strict data type. The general format is like this:
    <ns:MT_RECORDSET>
          <STATEMENT>
               <TABLE_NAME ACTION="">
                    <TABLE/>
                    <ACCESS>
                         <FIELD1/>
                         <FIELD2/>
                         <FIELDn/>
                    </ACCESS>
                    <KEY>
                         <ID compareOperation=""/>
                         <FIELDx compareOperation=""/>
                    </KEY>
               </TABLE_NAME>
          </STATEMENT>
</ns:MT_RECORDSET>
This recordset represents an SQL statement like "update TABLE1 set FIELD1=123, FIELD2=456, FIELDn='xyz' where ID=12345 and FIELDx is NULL"
MT_RECORDSET is the name of the Message Type used.
For the value of the attribute ACTION you can choose from the following values:
     UPDATE : updates the given fields in the table with their new values
     INSERT : insert the given fields as a new row in the table
     UPDATE_INSERT : insert rows in the table when update is not possible
     DELETE : deletes given fields from the table
     SELECT : selects given fields from the table. Note that this option returns a response in the JDBC Sender form!
     EXECUTE : execution of a stored SQL procedure
     SQL_QUERY | SQL_DML : option to transfer more complex SQL statements to the database
The attribute compareOperation can have the following values:
     EQ : equal
     NEQ : not equal
     LT : less than
     LTEQ : less than or equal to
     GT : greater than
     GTEQ : greater than or equal to
     LIKE : used to compare strings

Can sqltaglib.tld execute Oracle stored procedure?

Is it possible to execute Oracle stored procedure through Oralce's own sqltaglib.tld. The sqltaglib on-line manual only shows how to run SQL query/insert/update statement.
Thanks,

I went to a few forums and asked the same question. The boys down at Oracle Community Forums shed some light on this subject and, with their help, I was able to figure it out. Here is the thread for those who want to read: [My Thread @ Oracle Community Forums|http://forums.oracle.com/forums/thread.jspa?messageID=2721348?].
THE SOLUTION
cs = con.prepareCall("{ call get_countries(?) }");
cs.registerOutParameter(1, OracleTypes.CURSOR);
cs.execute();
ResultSet rs = ((OracleCallableStatement) cs).getCursor(1);

Help required in executing the stored procedure and capturing the responce

Hi,
I have to execute a stored procedure in oracle database and if it successful then have to create a status IDOC.
The stored procedure may throw an exception(it is not an out parameter), in such cases i should capture the exception as part of the response message and send this information while creating the status IDOC.
i would like if the below is possible.
As the stored procedure is not returning( this means if you execute the procedure manually it will display the result), will it be possible to capture the result which has the exception details?
any direction to this will be highly appreciated.
Many thanks.
Regards,
Rahul

@Bhaskar,
i need to execute the procedure by sending the input data from a file and capture the result after executing the procedure to create a status idoc
im not sure how the provided links helps me here.
i m not looking for any look ups. i would like to know is there any way that we can capture the result after executing the database procedure?
Edited by: Rahul_10416 on Dec 5, 2011 10:07 PM

Execute a stored procedure on a database

Hi,
I want to execute a stored procedure on an oracle database. Therefore I use the open SQL step configured as follows:
- option "statement requires parameters" is checked
- on the advanced tab: Command Type = Stored Procedure
After this step I use the Data Operation step with operation = Execute. Now, how can I set values for the parameters?
Has anyone an example where I can see how the needed steps have to be configured?
Thanks in advance
Best regards
Steffen

Hi Steffen,
Your sequence should have the following steps:
1) Open Database
2) Open SQL Statement
3) Data Operation
4) Close SQL Statement
5) Close Database
I am using a very basic stored procedure that doesn't really do anything:
CREATE PROCEDURE MySP @myInput int AS SELECT * FROM myTable GO
For step 2, your SQL Statement field should be the name of the stored procedure. In my example, it would simply by "MySP". Make sure you have the "Statement has parameters" field is checked.
For step 3, select "Execute" as the Operation. Under the Column/Parameter field, you can insert all of your parameters. In my case, I just have one parameter. I can refer to it by index (1) or name ("myInput").
Hope this helps!
Allen P.
NI

Error while executing a stored procedure from forms6i

When I execute a STORED PROCEDURE from ORACLE DB 10g this procedure works perfectly fine.
But when I execute the same from the FORMs 6i I get the following error:
PDE-PLU022 Don't have access to the stored program unit
XMLPARSERCOVER in schema CARE.
where XMLPARSERCOVER is the class and
CARE is the schema.
Regards,
Jignesh S

I have tried this with both the owner of the schema and the intended user, -from both forms and directly.
All rights was granted on the stored procedure. Since posting I have found that one of the tables that the procedure might insert into, was not explicitly granted to the intended user, and after rectifying that the error message went away.
-however, the procedure now silently "finishes" without any evidence that it ever ran, if invoked from the forms application. When invoked from SQL Plus (or JDev, or Toad) it runs as expected.
I have no public synonym for the procedure, -is that necessary?
The stored procedure in question is implemented in java, and published as a stored procedure. It does rather heavy lifting, when running, using a view against another server , updating local tables and quite a lot of data validation/cleansing, and logging. All recourses are within the same schema.
Any ideas?

How to select from a stored procedure?

Lets say I have a simple stored procedures
Create Procedure stp_test
As
Begin
Select * from tbl1
End
Go
I would like to be able to do this in SSMS (actually, I want to do this from ADODB)
Select top 10 * from ...stp_test... Order By rowID
It looks like I want to use OpenQuery on the stored Procedure, but I have not been able to do it correctly. How can I query my stored procedure?
Rich P

It looks like I want to use OpenQuery on the stored Procedure, but I have not been able to do it correctly. How can I query my stored procedure?
If you want to use the OPENQUERY method , use the following.. follow this link...
http://stackoverflow.com/questions/209383/select-columns-from-result-set-of-stored-procedure
Please mark as answer, if this has helped you solve the issue.
Good Luck :) visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How do i execute a stored procedure?

Similar Messages

Maybe you are looking for