How to execute a stored procedure every 5 minutes in biztalk admin console

Hi
how to execute a stored procedure every 5 minutes in biztalk admin console without using biztalk orchestration
we need to update table data every 5minutes
please replay asap...........
thanks advance....

WCF adapter is best suited for the same. Use ‘Template’ feature of WCF adapter. Template is mainly used to add wrapper elements around the body of the outgoing message from send port.
Below mentioned post is perfectly suited for you.
http://social.technet.microsoft.com/wiki/contents/articles/19845.invoke-a-sql-stored-procedure-on-the-biztalk-wcf-send-port-without-needing-an-orchestration.aspx
Regards,
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

How to execute a stored procedure/function in TOAD?

Hi, All ,
Can someone please tell me how to execute a stored procedure/function in TOAD?
I have tired
EXECUTE PROCEDURENAME(888), but it doesn’t work.
TOAD give me the error: invalid SQL statement.
Thanks a lot

Write PL/SQl block.
i.e Begin
Procedure name..
end;
Then it will be excuted.
Ashutosh

How to execute oracle stored procedure through php as externally?

hi...
i am searching for the way that how to execute oracle stored procedure through web service, i am using php and mysql, i have some stored procedures in oracale database, i want to execute them, from php, means the database will be remain mysql, and the stored procedures of oracle will be executed externally...
Kind regards,
Wilayat.

Ok, so first of all this is a kind of strange question. Since Oracle and MYSQL can happily live side by side.
Make sure you have the oracle client (instant or regular ) installed and OCI_8 is set up and working correctly in PHP. If it is, when you run the phpinfo() routine you will see oci_8 on there. IF PHP connects just fine from the command line yet apache wont connect check permissions and things like the LD_Library Path.
Then in php, right along with your MySQL statements run Oracle Statements eg:
<?php
$OraDB = oci_connect(name,pass,tnsname);
$MySQLdb = mysql_connect([parms]);
$oraQueryText = "begin sp_some_proc([some parms]); end;" ;
$mysqlQuery = " Some mysql Query";
$oraQuery = oci_parse($OraDB,$oraQueryText );
oci_execute($oraQuery);
mysql_execute([parms]);
?>
Use the standard fetch code to get data from either of them.
If you cannot and I mean absolutely cannot get an admin to link in OCI_8 then you still have recourse although it will be tedious as hell. PHP allows you to exec calls to the OS. You still MUST make sure the Oracle Client is installed and that sqlplus runs from the command line. You will more then likely have to have a shell script written to do this as well, but maybe not as I have never tried it with the exception of capturing the return value of sqlplus and you will have to dig into sqlplus to get it to send its results to a file you can then parse with php.
Good Luck!

How to execute an Stored procedure in SQLDeveloper?

Hi
Thank you for reading my post
I want to know how i can execute an Stored procedure in SQL developer 1.1.0.21
for example those sotred procedure from HR schema.
one of them is add_job_history
when i click on it and select run i see a new dialog with some sql as follow:
DECLARE
P_EMP_ID NUMBER;
P_START_DATE DATE;
P_END_DATE DATE;
P_JOB_ID VARCHAR2(10);
P_DEPARTMENT_ID NUMBER;
BEGIN
P_EMP_ID := NULL;
P_START_DATE := NULL;
P_END_DATE := NULL;
P_JOB_ID := NULL;
P_DEPARTMENT_ID := NULL;
HR.ADD_JOB_HISTORY(
    P_EMP_ID => P_EMP_ID,
    P_START_DATE => P_START_DATE,
    P_END_DATE => P_END_DATE,
    P_JOB_ID => P_JOB_ID,
    P_DEPARTMENT_ID => P_DEPARTMENT_ID
END;I checked the help and it said i should replace =>P_emp_id with some number
I did that and i get error.
can some one give me a sample for executing this procedure?
thanks

Remove the NULL values with the data you want to use in the SP.
BEGIN
P_EMP_ID := 32;
P_JOB_ID := 'boss';
For the date you have to chose the approriate string....

How to execute a stored procedure with an out parameter ?

Guys I am struggling with executing a stored procedure from sql plus.I mean my stored procedure has 2 input parameter and 1 out put parameter (status of the execution).
MY_PROCEDURE(p_name in varchar2,p_age in number,p_status out varchar2)
end my_procedure;
When I say
EXECUTE MY_PROCEDURE('manohar','Shetty');
i get insufficient parameters errors.
please help.

EXECUTE isn't a valid PL/SQL construct. It's a SQL*Plus command. You don't want to put any SQL*Plus commands in a PL/SQL block.
You can always execute a stored procedure purely through PL/SQL
begin
my_stored_procedure( x, y, z );
end;SQL*Plus happens to give you the execute command so you can avoid the begin and end statements.
Justin

How to execute MYSQL stored procedure using java

Hello friend
I am very new to MYSQL stored procedure how to call external stored procedure , from where i got good tutorials about MYSQL stored procedure and JAVA

If you need help with MYSQL or stored procedures this is not the place. If you need help with JDBC:
http://java.sun.com/docs/books/tutorial/jdbc/basics/index.html

How to invoke a stored procedures every hour? How to Cron ?

Hi. I have written a stored procedure using PL/SQL and it needs to invoke every hour to reset certain value. My question is how to cron or to invoke the store procedure every hour? I'm using Oracle 9i database.
Please advice if anyone of you had came acrossed this scenario.
Thanks.

As Kevin suggests, you can use cron to schedule the job, but you probably not be able to just use sqlplus on the command line. When a job is executed through cron, it nly gets the environment information that is in the global .login procedure, and nothing that is in your own .profile. In most cases, this means that that you need to call a shell script from cron, and set some environment variables. You can do this either by calling your .profile file, or by setting them explicitly.
Another thing to consider in using cron is that the command line used to start SQL*Plus will be visible to anyone who can log on to the UNIX box. For this reason, we run all cron jobs that execute SQL using an externally identified Oracle user.
Your minimal shell script should look something like:
#!/usr/bin/ksh
export ORACLE_HOME=/your/directory
export ORACLE_SID=yoursid
export PATH=$ORACLE_HOME/bin:$PATH
sqlplus -s username/password @/path/sqlscript
or alternatively
#!/usr/bin/ksh
. ~/.profile
sqlplus -s / @/path/sqlscript
Make sure that your sql script ends with an exit command to close SQL*Plus.
John

How to execute a stored procedure using Nqcmd

hi everyone,
I am having a stored procedure in Database which i want to execute it from nqcmd. Could anyone pls let me know how to execute it.
Regards

EJB3 JPA does not define stored procedure execution. There is a native query in JPA, but this is mainly for SQL. If you stored procedure has no output parameters you can normally get away with using a native query to execute it (be sure to include BEGIN/END in Oracle).

In TopLink 11g preview there are JPA extensions for defining stored procedures. You can use the @NamedStoredProcedureQuery for this, and then access the named query by name and execute it. You can also create an instance of a TopLink StoredProcedureCall and set it in your JPA Query through the TopLink Query extension setDatabaseQuery(), or define the named stored procedure query using a DescriptorCustomizer.

In TopLink Essentials there is no direct stored procedure support, so you would need to use JDBC directly.

If you are using a DataSource in your application the best way to get a JDBC connection is to use your DataSource directly. If the DataSource is JTA managed this will be the same connection that TopLink writes with.

If you need to get the connection directly from TopLink you can use,
((oracle.toplink.<essentials>.ejb.cmp3.EntityManager)entityManager.getDelegate()).getUnitOfWork().getConnection();

You may need to first call, UnitOfWork.beginEarlyTransaction(), (also ensure you release the uow connection).

---
James Sutherland

How to execute plsql stored procedure with DbAccess

sessionInfo object can give DbAccess .through
which u can use javax.infobus.DbAccess API to
execute sql satement and stored procedures according to infobus API .iam able to
execute simple query by using executeCommand() ,executeRetrival() ?. how to execute stored procedures with executeRetrieval() .
how to take in and out parameters
suggestions are welcome
waiting for your suggestions

I am also looking for the same.
Did you get any info on this
Thanks,
jagan
<BLOCKQUOTE>quote:<HR>Originally posted by chandra sekhar ([email protected]):
sessionInfo object can give DbAccess .through
which u can use javax.infobus.DbAccess API to
execute sql satement and stored procedures according to infobus API .iam able to
execute simple query by using executeCommand() ,executeRetrival() ?. how to execute stored procedures with executeRetrieval() .
how to take in and out parameters
suggestions are welcome
waiting for your suggestions<HR></BLOCKQUOTE>
null

How to Execute a stored procedure automatically after DB startup?

Is it possible to run a stored procedure automatically just after the database startup? And how can I know whether the procedure is running?
Thanks.

You would have to do something similar to this for the procedure to run every time the database is startedCREATE OR REPLACE TRIGGER <trigger_name> AFTER STARTUP ON DATABASE
BEGIN
<run_your_procedure_here>
END;
/

How to execute an stored procedure from the Report Region

Have stored procedure "LER_KRONOS_PAYCODE_HOURS_P" compiled and ready.
(previously tested)
Region Source:
DECLARE
v_SITE_ID VARCHAR2(8);
v_SDATE VARCHAR2(8);
v_EDATE VARCHAR2(8);
v_LEVEL3 VARCHAR2(60);
BEGIN
v_SITE_ID :=P4_SITES_LOV;
v_SDATE :=P4_SDATE;
v_EDATE :=P4_SEDATE;
v_LEVEL3 :=P4_LEVEL3;
EXECUTE LER_KRONOS_PAYCODE_HOURS_P(v_SITE_ID,v_SDATE,v_EDATE,v_LEVEL3);
END;
Error When run the page:
ORA-06550: line 11, column 12: PLS-00103: Encountered the symbol "LER_KRONOS_PAYCODE_HOURS_P" when expecting one of the following: := . ( @ % ; immediate The symbol ":=" was substituted for "LER_KRONOS_PAYCODE_HOURS_P" to continue.

You need the execute keyword only when you run it directly from sqlplus.. that will tell sqlplus to append the keyword begin and end after the procedure call.
Example.
SQL > exec proc1 (input1);
will tell sqlplus to run it as a block.. saying
sql> Begin
proc1(input1);
end;Inside the procedure , in your code, you dont need the execute keyword.
But, why do you want to execute a procedure inside the source for a report region..?

How to execute oracle stored procedure parallely.

dear all,
i am having a stored procedure in oracle that i run to 2000 times for different solids.
if i am executing this in one by one it is taking 6 hour to finish. eg. first it will execute for 1 sol and then start for 2nd sol.
instead of doing this; i want to run this parallely in multithreding; so that procure will run parallely for 50 sol.
please guide.
regards
munish

something like:
declare
job_num number;
begin
job_num := dbms_job.submit('proc('||1||')');
job_num := dbms_job.submit('proc('||2||')');
job_num := dbms_job.submit('proc('||1999||')');
job_num := dbms_job.submit('proc('||2000||')');
commit;
end;
At the commit all 2000 jobs will be submitted to the job queue. They will then run is as many as the database parameter job_queue_processes allows.
You can then monitor user_jobs to see when they are running, and finishing.
Of course you might be better of calling the procedure once and doing everything in one go, by maximising the power of SQL, but I have not idea what your procedure does or what a solid might be.

How to execute two stored procedures in a mapping?

Hi All,
I have a mapping with a source and a target table. In the same mapping, I have a stored procedure attached to a post mapping. during this execution of mapping the post mapping process works fine. Now I want to add one more stored procedure and attach to one more post mapping process. currently it is not allowing, is there any work around to implement this plan. pls post your suggestions.
Thanks in Advance,
Kishan

Hello Kishan,
The only way to archieve this currently is to create a super-procedure that calls all your stored procedures in sequence, and use the super-procedure with the post mapping operator.
Regards, Hans Henrik

How to Execute a Stored Procedure having cursor?

Hi Experts,
I'm a Newbie in Oracle can please help me on creating a execution script for the following SP.
create or replace
PROCEDURE TestListsGet
v_Mkt IN CHAR DEFAULT NULL ,
cv_1 IN OUT SYS_REFCURSOR
AS
BEGIN
   OPEN cv_1 FOR
      SELECT NAME,
            LIT,
            LiInfo,
            DisplayOrder
        FROM ListsGET
       WHERE Mkt = v_Mkt
        ORDER BY DisplayOrder;
END;Regards,
--Eswin

There are many constructs you would have to read up on in the PL/SQL guide.
Where do you plan to call the procedure from?
The following uses SQL Plus
set serveroutput on
declare
r sys_refcursor;
v_name          ListsGet.Name%type;
v_Lit           ListsGet.Lit%type;
v_LiInfo        ListsGet.LiInfo%type;
v_DisplayOrder ListGet.DisplayOrder%type;
begin
TestListGet (v_Mkt => null, cv_1 => r);
loop
   fetch r into v_name, v_Lit, v_LiInfo, v_DisplayOrder;
   exit when r%notfound;
    dbms_output.put_line('Name          : ' || v_Name);
    dbms_output.put_line('Lit           : ' || v_Lit);
    dbms_output.put_line('LiInfo        : ' || v_LiInfo);
    dbms_output.put_line('Display Order : ' || v_DisplayOrder);
end loop;
close r;
end;
/

How to execute a stored procedure?

I searched in a forum about this, but the follow links are broken:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/codeclips.html
http://developers.sun.com/prodtech/javatools/jscreator/reference/codeclips/2004q2/dbws/stored_proc.html
Thanks.

Hi,
Have a look at this simple example:
    public static String createCurrency(String key, String description) {
        String errMsg="";
        try {
            // You will need got get a database connection !
            Connection conn = DBManager.getConnection("TDMCORE");
            CallableStatement stmtCreate = conn.prepareCall
                ("begin pkg_currency.createcurrency(?,?,?); end;");
            stmtCreate.registerOutParameter(3, java.sql.Types.VARCHAR);
            stmtCreate.setString(1, key);
            stmtCreate.setString(2, description);
            stmtCreate.setString(3,null);
            stmtCreate.execute();
            errMsg = stmtCreate.getString(3);
            if (errMsg == null){
                return null;
            } else {
                return errMsg;
        } catch(Exception e){
            return errMsg + " " + e.getMessage();
    }Calling createCurrency creates a new currency in our database returning any DB error message.
Hope this helps,
Catalin Florean.

How to execute a stored procedure every 5 minutes in biztalk admin console

Similar Messages

Maybe you are looking for