How do I find out the file size of my photos, and change them to the size

This will sound inane, but I cannot figure out where to find the file size of my photos in iPhoto. I need a jpeg of a certain file size and image size for my blog background, but can't figure out how to even start.

If the limited quality options do not get you the file size you need export the full size image files to a folder on your Desktop and use Resize! to batch resize the image dimensions and file size (jpeg compression level) to what you need.
Click to view full size
With Resize! you can fine tune the pixel dimensions and file size.
OT

Similar Messages

How do I find out what my settings are so I can change them

hi there, I have captured some clips. when I drag them to the timeline, it says "these clips dont match your settings, do you want to convert them to your current settings". I have to say yes. Trouble is, I look at the "item properties" on the clip inside the browser, and it is the same as the clip I put onto the timeline (which supposedly got changed when I dragged it to the timeline). What settings are conflicting and where do I find out?
My capture is set to HD using the HD 72030 codec. I filmed on my HD setting with the 30p frame rate. Is there something wrong with that setting? Please help! I appreciate anyone's help.

Hi again... sure. My camera is a Canon XH-A1s set to HD and 30F frame rate. I am not using the on-board mic, but an add-on mic (NTG-1) which has it's XLR input set correctly to ch1/ch2.
The clip properties in the browser:
type: clip
creator: quicktime player
source: ...
offline
size: 145mb
tracks: 1V.2A
vid rate: 29.97 fps
frame size: 1440 x 1080
compressor: Apple intermediate codec
data rate: 8.0 MB/sec
Pixel aspect: HD (1440x1080)
anamorphic (this is not set even tho it is by nature of HD)
field dominance: none
Alpha: none/ignore
Reverse alpha : blank
Composite: normal
Audio : 1 Stereo
Aud Rate: 48.0 KHz (left and right channel both say 48.0 KHz)
Aud Format: 16-bit Integer (left and right channel say 16-bit)
Ok, now after I dragged it down to the timeline and the msg came up and it was "converted", the properties are all the same EXCEPT for info about the audio.
Audio: blank
Aud Rate: interestingly, A1 has 48.0KHz but A2 has that same 48.0KHz greyed out
Aud Format: blank and again A1 has 16-bit integer, but A2 has 16-bit integer greyed out
also, on the timeline, there are 2 audio tracks but there is a small pink triangle at the beginning and the end. I moused over that triangle but I don't know what it is.
very interesting ! do you have any clues how this got this way? I appreciate it !

How do I find out a file in a disk?

can anyone tell me
how to I find out a file in a disk?
Thanks in advance.

That's almost a haiku you wrote there, isn't it?
There's no standard API class/method to do that so you need to write your own: you'll have to pass through directories recursively. The File.list method will help you get file listings from a directory.

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

How do i find out what tcp ports are open? and where do i look it up?

how do i find out what tcp ports are open? and where would i go to see them? i have a program that is asking for it and i am unable to find where those are listed.

If you are not too tech savvy, try using the Network Utility found in the Utilities folder. Just have the Mac scan itself.
If tech savvy, there's always Fyodor's classic NMap, found at www.insecure.org.

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck

All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
This is very irritating !! If I wanted Yahoo I would ask for it !

I have created two related books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

I have created two related Blurb books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

I would like to copy my iPhoto (9.4.1) library from my Mac Pro (10.7.5) to a Macbook Pro (10.7.5). Can I drag the iPhoto Library to Air Drop and send them to the MacBook? Will that then be a usable iPhoto library on the Macbook?

I would like to copy my iPhoto (9.4.1) library from my Mac Pro (10.7.5) to a Macbook Pro (10.7.5). Can I drag the iPhoto Library from the Pictures folder to Air Drop and send them to the MacBook? If I then move that to the Pictures folder on the MacBook will that then be a usable iPhoto library on the Macbook?

It would be better if you could connect the two Macs via a hard wired LAN to copy the library from the Mac Pro to the MacBook. Wireless connections can have momentary dropouts which could affect the reliable copying of files.
If you do go with Air Drop be sure to open and inspect the copied library closely to confirm it was a successulf copy.
OT

Mac Air 11" - how do I find out what files are showing up in "About this MAC" Storage "other" category?

Hi - I am having storage trouble with my storage. When I go into About this Mac, Storage, the category "Other" has a very large amount of gigs stored. I have already dumped my email, downloads when in to Trahs, emptied secure trash, etc. How do I find out what is included in the "other" category?

First, empty the Trash if you haven't already done so.
Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste (command-V) into the Terminal window. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

How can I find out those files whose name has space character?

Hi
How can I find out the files whose name has space character in a whole file system?
Thanks
Jerry

thank you all
I can use this command to find out like
$find ./ -type f -exec ls -1 {} \; 2>/dev/null | grep " "
./space in name
while, I modify above a little to find out a spcific file systems like below:
$find /bbj* -type f -exec ls -1 {} \; 2>/dev/null | grep " "
/bbj14/appl/oracle/prdrep/S_STATIC_TAB_05.dbf
--while, I didn't see any space character in file name "S_STATIC_TAB_05.dbf"
what is wrong?
thanks

Profile folder how do i find out what files mean

firefox is running slow but how do i find out what is safe to delete in profile folder?

Hi Jon, this article has information on what's in the folder:
* [[Recovering important data from an old profile]]
However, rather than sort through it manually, you might consider using the Refresh feature. This article describes what is kept and what is lost in that process:
* [[Refresh Firefox - reset add-ons and settings]]

How do I find out which computer I sync music, videos and photos on?

I am about to update my iPhone to iOS 4.2 but it tells me that to preserve my media, I should apply this update on "the computer where you sync music, videos and photos". How do I find out what that computer is?

You should be regularly backing up then you can just move your library to a new computer and sync there.
If you don't have one then you will have to transfer purchases (grab a 3rd party program for non-purchased content) and then sync to the new computer
http://support.apple.com/kb/ht1848
http://support.apple.com/kb/ht1727

HT5312 How do i find out what my security questions are if i forget them??

how do i find out my security questions if i dot remember them without contacting the support??

If you didn't previously set up a rescue email address, you can't do that on your own.
(95306)

How do I find out a file's particular size?

Good Evening,
I am looking for assistance with figuring out a file's particular size within a group of files.
If I have one large directory and I am looking to find out what the smallest file in that directory is, how would I go about doing it?
Also, how would I figure out when the file was created on the system or particular hard drive such as a network attached storage device?
Thank you!

While command + i (or the Finder Information icon) would give you the file size, that would require a one-by-one approach. Perhaps quicker would be using a utility like "What Size" that will list Folders/files and give the size of each.

How do I find out the file size of my photos, and change them to the size

Similar Messages

Maybe you are looking for