How do i fix garbled audio

How do i fix garbled audio? making slideshow with narration. have tried two methods. first to record small audio files and attach them to individual slides: easier to edit audio recorded in quick time
second method is to record voice over narration in keynote, so far as I can determine this method requires corrections to re-record entire presentation.
in either case when I play slide show my audio files play with glitches, stops and losses that garble the message.

No not always, but sometimes. I have had my macbook pro in for service they replaced a speaker and cable and dvd drive, full system diagnostic.... still having the same problem. I am not sure if it is something I am doing, software glitch requiring full restore or a memory problem... it seems almost like a streaming problem to me but i am unsure of myself and the apple system diagnosis should have turned up any hardware problems??

Similar Messages

How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night.

How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night. I have been having video calls iChat with my granddaughter for 4 weeks. All of a sudden last night I wasn't able to complete the video/audio. We were able to iChat with writing. The message I got was to go to connection doctor.
The error log -
2011-04-24 19:33:43 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Video channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Every time we tried to connect I got the same error message.
I use an airport extreme - my granddaughter has some kind of wifi - but the error was on my side not hers as she connected to her friends.
Please help.
Thank you.

Hi - I have a cable modem from comcast.
I am not sure I understand all your questions, suggestions - so I will copy what I have when I go into the airport utility under internet.
Do you have four tabs (You may have less) I HAVE 4 TABS
In the First tab what does it read at the Bottom ? AT THE BOTTOM OF THE FIRST TAB (INTERNET CONNECTION) IT DOES SAY "SHARE A PUBLIC IP" WHEN I LOOK AT THAT SETTING - I COULD CLICK INSTEAD BRIDGE MODE OFF, OR DISTRIBUTE A RANGE OF IP ADDRESSES. BUT FOR NOW THE ONE THAT IT IS ON IS THE SHARE A PUBLIC IP.
"Share a Public IP" ?
Or "Bridge (Off) Mode" ?
I DON'T UNDERSTAND WHERE TO LOOK FOR THE INFO BELOW. I ALSO HAVE UNDER THE INTERNET CONNECTION TAB - CONNECT USING ETHERNET AND ETHERNET WAN PORT AUTOMATIC (DEFAULT)
THE 2ND TAB IS TCP/IP AND THERE IT LISTS CONFIGURE IPv4: USING DHCP
IP ADDRESS: 69.138.244.124
SUBNET MASK 255.255.248.0
ROUTER ADDRESS 69.138.240.1
DNS SERVER 68.87.73.246 AND 68.87.71.230 (THESE ARE FILLED IN THE BOXES AND NOT CHANGEABLE.
THE 3RD TAB IS DHCP
DHCP BEGINNING ADDRESS 10.0 .1 .2
DHCP ENDING ADDRESS 10.0.1.200
DHCP LEASE IS 1 THEN DAY
4TH TAB NAT
CHECKED IS ENABLE NAT PORT MAPPING PROTOCOL
I HAVE BEEN USING THIS AIRPORT EXTREME FOR AT LEAST ONE YEAR.
THE ONLY DIFFERENT ISSUE IS THAT I HAD BEEN TRAVELING AND USED MY DAUGHTER'S AIRPORT EXTREME LAST WEEK. I HAVE NO IDEA ANY OF THAT INFO - BUT I DO KNOW THAT THE AIRPORT EXTREME LISTED IN THE UTILITY IS THE ONE AT MY HOME THAT I AM WITH NOW.
THANK YOU FOR TAKING THE TIME TO TRY TO HELP ME. I REALLY APPRECIATE IT.
JUDY
Between that drop down and the tabs should be the info on how it connects to the Modem.
It may list that Puiblic IP.
It may list another LAN IP (one from the Modem)
Does it start 192.168....
Or 172.16 (or up to 172.32....)
Or possibly another 10.... number ?
If the modem is issuing IPs to the LAN there are two things that can effect things
One is the fact the computer gets two IPs (even though the mac can only display one)
And If you used Port Forwarding in the Modem the Place (IP/Computer or device) that it was pointing to may not be the Airport Base Station any more.

How do I fix horrbile audio?

Right now I'm editing some work for a friend and the audio on all his footage is beyond horrible. Its too loud and all distorted. I've tried messing with all the audio filters I have from FCP Studio and I can't seem to make it decent. I know I cant get it perfect but when the audience starts to clap or laugh, it hurts my ears. I play around with the hum remover filter the most and I still cant achieve decent audio. I'll be using close to nothing of the audio from the camera but there are three speechs that are important.
How can I fix this audio problem? What filters and modifications should I use?
Dual 1 GHz PowerPC G4 Mac OS X (10.3.9)

You can't. Once the audio is distorted in a digital recording it's gone. There is no way to salvage the distortion. It's just clipped. You can reduce the level to make it less painful, but there is no way to recover the sound that has been clipped.

How do i fix an audio error code 25974?

how do i fix an audio error code 25974?

Typically this can be caused by an out of date driver or one that is not fully compatible with the version of OS X that you are using...
So, which Audio Interface are you using and are you using the latest drivers for that Audio Interface.. and are those drivers compatible with your version of OS X?

How do I fix the audio quality on my iTunes? It sounds very distorted.

How do I fix the audio quality on my iTunes? It sounds very distorted.When listening to audio from other websites or programs, it sounds absolutely fine. Only when listening to music on my itunes is when it sounds awful and distorted. Please help.

Artwork doesn't sync with music in ipod...: Apple Support Communities
next try
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

The volume on imovie09 suddenly stopped working. How can I fix the audio volume?

The volume on imovie09 suddenly stopped working. How can I fix the audio volume?
I have no idea what triggered this. Other projects work with volume. But my current project will play the audio but no volume. HELP please.

How exactly stopped working? Three things to try
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

How can I fix the audio of my movies and tv shows on itunes?

So all of my movies and tv shows are choppy, have bad static, and the audio doesn't match the picture. How do I fix it???

The only thing is, I have read where it will only keep 100 entries at tops. I'm not sure as I have never let it get that high, however many business users have reported this.
OP, how much history are you talking about keeping? Also, there is no method to archive this in any fashion to be looked at or searched at a later date.

How can I fix the audio midi setup

Hello,
sorry for my bad english, but I have some problems with the audio midi setup. Audiosetup works fine but Midi-Setup shows an error after a view minutes loading. How can I fix this problem. Thanks a lot for your help.

If you go to System Preferences->Keyboard look at how your Use all F1, F2 etc, keys is set. If it is checked then to use the volume keys you need to press the fn key. If you want it use the volume keys without also pressing fn then uncheck it.

How do you fix the audio to the tracks who are not responding?

When I try to listen through the song, nothing besides the "Audio Recorder" responds and make sound! So it's like 5min, with only 30sec with music (haha). So the drum machine and the other intsruments, won't respond and doesn't make any sound!
Any Idea how to fix this?
Thanks, Ken-Tore.

Hello KaizerKen69,
I was looking into the issue you are experiencing and found some information that might help get Gargeband back on track. First I recommend backing up your projects with this article: GarageBand for iOS: Backing up your songs found herehttp://support.apple.com/kb/HT4692.
Then use our iPhone Troubleshooting Assistant found here: http://www.apple.com/support/iphone/assistant/application/#section_3.
Assuming there are no softwrae updates for the app in the app store, I would sart on section 3:
Close App
If only a single app has stopped responding or closes on launch, try the following:
Return to the Home screen, and then click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the - to close it.
Double-click the Home button and try opening the app again.
Work your way down as necessary.
Cheers,
Sterling

How can I fix my audio?

Hi Everyone,
My audio completely crashed yesterday and I really need it to be fixed. Can someone help me? Also, part of my headphone jack on a pair of my headphones broke off in the headphone port. Please tell me how I can get it out.
Thank you,
Halle

You may have to take the computer to the Apple store to have the broken part removed.
Sound output may be stuck in the digital mode.
That may be the reason that internal speakers do not work now.
Best.

How do you fix the audio from drifting sync on DV footage?

I know there has been some discussion about this, but the solution doesn't really make sense. Basically, I am having a huge problem with audio sync on anything shot on MiniDV. Sometimes the footage will pop at the beginning and the footage will immediately be off sync --- sometimes it takes halfway through the tape to start drifting. We work with pro-level camcorders and recording decks, and basically the only solution I can find it use legacy FCP or iMovie to capture the footage. Which is not a solution. I've also tried the re-time fix, which *sometimes* works ------ but only sometimes. Is this being addressed in any way?

Did you load the Presenter presentation in a Share pod or are you using screen sharing?

How do I fix the audio dropouts and clipping/clicking since upgrading to Mavericks?

Since I upgraded to Mavericks on both my MacBook Pro (15" Mid 2010) and my Mac Pro (2 x 2.26 GHz Quad-Core Intel Xeon, Early 2009), I've been getting various audio playback issues.
Randomly, I can be on a website like YouTube or Vimeo, or using software like Ableton or iTunes, or even just Quicktime, and the audio starts struggling and clicking/popping.
Considering I'm an audio engineer by trade, this is more than a little annoying. A restart seems to temporarily fix it, but it can happen hours or even minutes later.
Anyone else having this issue? Is there a fix?

I'm having this problems too on my audio interfaces, it's soooooooo really really ultra annoying... gosh, if just i'm not installing this horrible Mavericks update. PLEASE APPLE DO SOMETHING ABOUT THIS!!!

How do I fix the Audio Delay when recording Voiceovers?

I've been recording voiceovers in Final Cut Pro X and noticed that its a huge delay in the audio when I play it back. The recording is like a second or two behind making the voiceovers sound wayyy off to whats actually goin gon in the video. Is there any fix to this or is this a hardware issue? I'm running Final Cut Pro off of an External harddrive since my Macbook Pro can't handle the program as well. Its a 2009 17 inch. 4 Gigs of ram....150 Gigs of storage space left running on Mavericks. Any info is appreciated.

The VO or the video is a connected clip. You can trim it and move it according to your needs. Or do I misunderstand the issue?
Russ
Message was edited by: Russ H to strike through three words

CS3 How do I fix inconsistent audio levels?

With cs3 I'm creating a montage with video and pics. The audio from the video clips i'm using isn't the greatest. I'm having a hard time getting the audio to match the level of the song playing in the background. As each video clip fades in as I lower the audio level of the background song but its a harsh difference between the 2. Is there any fix to muffeled voices in the video in clips? Is there a set standard for the audio levels that would smooth it all out. Also, it seems to be inconsistent when played on different dvd players... meaning it sounds ok on one and horrible on another. Thanks if you can help!!!

I set my Audio Levels by ear, and by hand, with a little watching the meters. This ARTICLE will give you two methods, and explain the differences.
I am much less a fan of Normalize, as I find that it seldom does exactly what I want, and often really raises any noise floor, while not having the desired effect for the other Audio. Also, this ARTICLE might be helpful for cleaning up Audio.
Good luck,
Hunt

How can I fix scratchy audio?

how can I make audio to not be scratchy?

ap_TonyTony wrote:
Sandpaper.
o| TonyTony |o
seriously dude i need to finish it by tonight.

How do i fix garbled audio

Similar Messages

Maybe you are looking for