How do I fix hte margins in Print Select?

Print selection prints with huge margins; all I get is a tiny column down the middle of the page. I use Mac os 10.7. this does not happen if I print the entire page.

I believe the OP means "achieve" not "archive" Mr Pedantic. Its a simple enough spelling mistake.
One solution would be to add an extra method to your UserDetails bean
public String getComboDetails(){
return getFirstName() + " | " + getLastName() + " | " + getCity();
}Cheers,
evnafets

Similar Messages

How do I fix uneven borders when printing photographs?

I have been using Photoshop for many years to print photographs and never had a problem getting my selected borders to print evenly. All of a sudden I have a problem with my printer giving me photographs with totally eneven borders - both vertically and horizontally. How can I fix this?
Also, sometimes the clone stamp tool changes from a circle into another shape and the cropping tool turns from a # shaped tool to another icon tool (the same as the changed cloned stamp tool) which I don't like. How can I get them to go back to go back to their original shapes?

Add the 2 pictures and 2 captions manually
Go to File>new>blank file. Enter width & height of your paper stock. Resolution should be (ideally) the same as that of the pictures. For printing, recommended range is 240-300px/in
For picture #1, go to Select>all, Edit>copy.
Open the blank file, go to Edit>paste
With the move tool, position the picture, and resize with the corner handles of the bounding box. Leave some room at the bottom for the caption
Do the same for picture #2
You should have 3 layers: Background, picture #1, picture #2
With the type tool, type the text for each picture and position
You should have 5 layers now
If the canvas is niot large enough, you can add to it via Image>resize>canvas size.

How do I fix a failure to print using an HP Photosmart C 4780 printer.

We purchased a HP Photosmart C4780 printer some years ago, but did not install it for a variety of reasons. Recently unpacked it and installed software using enclosed cd. The printer is connected to my 13-inch MacBook. When attempting to print, the paper goes through the printing process but comes out blank. Yet the printing tests all come out fine. Downloaded updated driver software from HP, but got same results. My computer uses the Microsoft suite for MAC, but I don't know if that makes a difference. Suggestions?

Was there instructions on how to set up the printer with a Mac included with the printer?
The 'easy setup guide' that used to come with HP printers and others, was adequate to
see if the included printer drivers were already in the computer. For much older printers
and OS X versions, the starting point once this was determined, was to see how old the
drivers included on disc media were; then look to printer-maker web site for later ones.
Did you attach the printer via USB cable, and turn it on, then power down the Mac, and
attach the cable to the computer, and restart the Mac? Variables of this idea, where the
printer is seen on startup if available to the system, are often successful.
Also some older printer are capable of being supported by wireless, via Bonjour printing.
And even older ones could be used via USB port in an Apple base station, as wireless.
You could check the printer setup assistant software in your computer (utilities?) and
see if the System Preference panel for Printing suggests it may actually be available
to print. Try basic stuff since an application not native to the system is not a basic test.
Everything that can be printed in the Mac, should be printable from the Finder, or in
any of the Print selection boxes in any open application.
Testing the setup printer by its simple tests, for the most part, does not require a computer.
You should be able to set up the printer and run tests from it, based on the printer software
it shipped with. And older stored computers may have dried-out ink cartridges. It may take
significant 'head-cleaning' routines at some point in the future, to enable those to work...
Not sure what you have tried, or how far you went, to begin at ground zero here.

What is a supply memory error 10.1000? How can I fix it? My printer won't scan nor print.

My Laser Jet M1212nf MFP still copies, but everytime I try to print or scan a document it doesn't work and it shows a supply memory error on the display. I already tried to switchof and uplug the printer, but the problem still persits. Can anybody help me???
This question was solved.
View Solution.

Just fixed this on yet another Laserjet 2600dn....
Remove the affected cartridge. Look at where the chip on the cartridge hits the reader at the rear of the machine. There are two triangular 'wires' which hit the chip.
They should both be raised proud of their mount. In all cases of this error which I have dealt with (I'm a reseller) one or both have been pushed into the mount and are failing to spring out when the cartridge is removed.
This prevents the chip being read.
The solution? Grab them and gently pull them proud again so that the inserted cartrdige makes firm contact with them.
Problem solved! Hope this helps at some people experiencing this issue.

How do I fix a 59.C0 Printer Error issue? I have a HP Color Laserjet 5550 dtn.

I have unplugged the unit as it instructs. I do not know what to do next? I can be reached at 317-642-7512 if anyone can help me. Thank you.

Hello mikevallabh,
The HP Color LaserJet 5550 Printer series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Also, here is a link to the support page:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I bought a song on iTunes, and it is on my iPad, but the song will not play, it skips to the next song. How can I fix this?

I bought a song on iTunes, and it is on my iPad, but the song will not play, it skips to the next song. How can I fix this?

Music>Songs>Select song>Swipe from left to right to delete.

Created slide show in iPhoto, but with new version music no longer will play. When I click on fit slideshow to music, iPhoto shuts down. How can I fix this.

I created a slideshow in a previous version of iPhoto. Since updating software the music in my slide show no longer plays. How do I fix this? If I select fit slideshow to music, the application will shutdown and the error file is sent and have to reopen iPhoto.

I reorganized iTunes music library and it works.

When I do a google search, why all off a sudden is it sending me to Bing? How can I fix this?

When I do a google search, why all off a sudden is it sending me to Bing? How can I fix this?

Because you selected Bing? Check, click & hold the triangle, and select Google.

I just updated my OS to Mavericks, as well as my Pages app. Now my previously created documents print out as blank paper, even tho I can see the text on my desktop.The margins have also been altered. How do I fix this?

I just updated to Mavericks, then updated my Pages App. Now none of my previously created documents print out, except as blank pages, even though I can see the text on the documents, but with altered margins, on my computer screen. How do I fix this so the documents print out normally again?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

I have created a document in in design but when i print it out the borders are wrong. How do I fix this?

I have created a document in in design and have put a border around a photo and text box, but when i print it out the border is not even. How do I fix this?
Barry

Hello John, Thanks for replying. I have attached the document as a PDF (is this OK). I have been tasked with designing this certificate for my local RSL sub-Branch for our up coming Centenary Of ANZAC commemorations. As most of what I do has been self taught I’m sure there is a simple answer to my problem. I have adobe CS6. This is how I set the document up. I first used the rectangle frame tool then pulled in a photo from Bridge and faded it.I then did the same with the logo. For the text I used the text frame then used the frame tool twice to form the border and adjusted the thickness. Then I set all of the margins and the document to A4 . When the document is printed it shows even borders of 12mm on the top bottom and right side but the left side is 34mm. I hope this makes some sense to you John.
Kind regards Barry

When I click on Print to print a pdf from my computer, the message "initialization of rasteurization module failed". What does this mean - how do I fix it?

Why can't I print a pdf in Acrobat Pro? I keep getting the message "initialization of rasteurization module failed". What does that mean and how do I fix that?

This is an Acrobat error ("Initialization of the rasterizer module failed.") but it is has never been reported before that I can see.
Let's start with the basics.
- What version of Acrobat Pro
- What system
- What printer
- Does it happen with other printers?
- Does it happen with all files?

How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

how do i fix my printer when it won't show the print preview for web pages? it worked for a while and now it doesn't. printer is an hp officejet 7310 all-in-one.

I would suspect this is a hardware issue. The rollers are probably having issues picking up the relatively smooth thick media. You might have better results be cleaning the paper pickup rollers with a damp paper towel. Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a Windows 8.1 machine. I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

TS2551 forced to upgrade to get on IPhoto & now an ! shows up everytime I try to view/email/print a photo! How do I fix this?

I had to upgrade to get on IPhoto and now an ! shows up each time I click on a photo to email/print. How do I fix this problem? Thank you

What do you mean by "get on iPhoto"? What was the exact message that you got? It may have been a message to upgrade the library rather than the application. The only time the app needs to be upgraded is when the library has been opened by a later version of the application.
As for the ! it shows up when iPhoto has lost/broken the file path to the original files in the library. So apply the two fixes below in order as needed:
NOTE: since you gave no indication of the version of iPhoto or system you're using the following is based on iPhoto 9 (11) and Lion or later.
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

How do I fix hte margins in Print Select?

Similar Messages

Maybe you are looking for