New features added in Ipad 2 after updating to IOS 5.1

As far as i know update for ios 5.1 is avaiable and they have said some featues will be added.
What are all the features added after updating to ios 5.1?
is it sucure to go for this update?

iOS 5.1 new features

Similar Messages

  • How do I get back into my iPad after updating the iOS?

    how do I get back into my iPad after updating the iOS?

    What do you mean? Why can you not access the iPad?

  • Itunes doesn't work on ipad after updating to iOS 6

    itunes doesn't work on ipad3 cellular after updating to iOS 6

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • New features under notification bar after update

    After I received an update there were some new features on the phone under the notification drop down like an auto rotation button and mobile data button, what do these do?

    The auto-rotation allows you to control if applications can rotate 90 degrees to landscape mode.
    The mobile data allows you to turn off or on the 3G mobile network. You can still make phone calls, but you won't be able to connect with the 3G EDVO network. It is helpful if you are in a bad 3G location or want to save the battery.
    I would sometimes turn off the mobile data at night so emails and other data sent messages would not disturb me and still allowed phone calls to ring.

  • TS3274 My iMessage won't send on my iPad after updating to iOS 6

    My iPad wont send or receive messages after I updated my iOS....

    Check Settings>Messages>Show Subject Field>Off. Make sure that is turned off.

  • Cannot activate ipad after updating to iOS 4.2.1

    I just update my ipad to iOS4.2.1 but unable to activate it.
    The message on itunes (10.1.0.56) reads "We are unable to complete your activation at this time. Please disconnect your ipad from your computer and reconnect it later and we should be able to activate it"
    But even after I tried several times, (and on other ppl's computer, so it's an internet connection issue), I am still unable to activate. And always show an "iunes + white USB cable" logo on ipad screen and the same message on itunes.
    Any can help? PS:
    1)I update through local .ipsw file, (shift + update), the file is no problem
    2)My ipad is not JB

    I just experienced the exact same thing after upgrading from iOS 4.2.x to iOS 4.3...
    Now my iPad shows the picture of the white USB cable that tells me to connect to iTunes to (re)activate. After trying this nothing happens - except from a message in iTunes telling me that;
    "There is a problem with your iPad.
    We're sorry, the iPad you connected may be damaged and canot be activated for service. We recommend you to visit your nearest Apple Store for more information. To find your..."
    Anyone else had similar exeriences?!

  • The wifi is useless on my ipad after updating to ios 8.0.2

    Can anyone help.  I updated my ipad to ios 8.0.1 - no problems.  Since updating to ios 8.0.2 it's virtually useless.  The wifi is ridiculously slow and unreliable and even when I establish a connection many of my apps report that there's no network connection.  Please help.  My ipad air is virtually useless now!

    No improvements on wifi connection, getting very tired of reconnecting connection every few minutes. How many times do Apple need to get this correct, I've already changed my phone from Apple to sony Experia z1, great phone I might add and now will be looking at how or if Apple can resolve this for iPad air , if not I will have no choice but to ditch Apple permantely. I wonder if this is the things to come from Apple now, the great demise as I watch.

  • Notifications no longer working on my iPad after update to iOS 8

    I have turned on Notifications (all Green) in my Settings and I have each of the Apps that I want to receive notifications from also turned on individually (all Green), yet I have not received any updates since upgrading two nights ago to iOS 8.    I am not getting news feeds or my daily newspaper alerts!  I swipe down and Notifications has been empty for two days straight.  This is driving me crazy.  What's wrong???

    No improvements on wifi connection, getting very tired of reconnecting connection every few minutes. How many times do Apple need to get this correct, I've already changed my phone from Apple to sony Experia z1, great phone I might add and now will be looking at how or if Apple can resolve this for iPad air , if not I will have no choice but to ditch Apple permantely. I wonder if this is the things to come from Apple now, the great demise as I watch.

  • Cannot restore previous profile in ipad after updating to iOS 8, it never finishes

    iPad 64M, wireless, IOS 8
    I updated my ipad to IOS 8, which erased everything from it. At reboot, when asked to set it up as a new ipad or restore a previous profile, I selected previous profile and let it go.
    I have not been able to restore my ipad. It does the restore but i never finishes copying the apps. Very few things work.
    Is anyone getting the same problem?

    Hi Tripix,
    I understand it starts the restore from your previous backup but never finishes. 
    Here is an article for help with restoring from your backup.
    iOS: If you can't back up or restore from a backup in iTunes
    Depending on how much you are restoring, it can take quite a while.
    Best regards,
    Nubz

  • I cannot install or update apps on my iPad after updating to IOS 1.08

    Tonight i updated my iPad to the new update out. i now cannot do any of the 19 app updates i need to do or cannot install them. i also tried downloading a tv series and that is not working either just has been saying waiting all night. does anyone low what is going on and how i can fix this.

    Try resetting the device by holding the power and home keys down until the Apple logo appears.
    Barry

  • Restoring iPad after updating to ios 7 caught in loop

    So I've been restoring my ipad for the past three hours. It'll restore and then it will go back to the welcome screen and ask me to restore it all over again. This is probaby the seventh time I've restored it. Any way to get out of this loop?

    I saw this response in another post and it worked for me.
    Hi,
    Also saw this happening - in a loop with restore from ios 4.4 > 7.0 after upgrading via itunes on PC
    Looks like as it was an old ios version it didn't have any of the icloud setup on it, so setup assistant, even though it had all media and apps restored after the upgrade, assumed it hadn't been setup
    Just click on setup as a new ipad, it will ask you to log in to icloud and then ask about setting up backups automatically e.t.c. - just go through the options and it will then exit the setup assistant and finish the upgrade to ios 7
    hope that helps

  • Air Drop on iPad mini & iPhone, but not iPad after updating to iOS 7

    I have recently updated my iPhone 5,iPad & iPad mini to iOS 7.Air Drop is on iPhone 5 & iPad mini.When I open control center on iPad,there is no option to turn on Air Drop.

    I'm new at trying these things.  I have AirDrop on my iPad mini......but......can't seem to see where the share button is.  Like I said.....I'm new at this.  Any idea where I should look?

  • Why suddenly I can't use of my 3G on my iPad after updating to iOS 6.0??

    Right after iOS Ver 6.0 released the other day, I update my iPad3 3G (Cellular) +WiFi. But suddenly to my surprised, I can't access everything using my 3G. And that defeats the purpose of having purchased this unit for its 3G application. Can someone help me please. Thank you!

    I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..

  • ITunes Radio not working on iPad after update to iOS 7

    it shows its been updated and I can see the stations, but it keeps saying that radio station cannot be added
    or it will not even start...Ive rebooted it a couple times and even did a factory reset and it still will not play

    I would try and hold the power and home button down at the same time for 15 seconds or until device shuts off, then see if it works. If that does not work try resetting your device. If you do not want to reset it, contact Apple support.   make sure to back up everything on device!

  • Unable to sync between iPhone & iPad after updating to iOS 6.

    Hi anyone with similar problems?
    Help needed...
    Thank you in advance.
    Addy

    You need to enable iCloud syncing on each device for automatic syncing. On the iPad, go to Settings & scroll way down to Numbers & turn iCloud on.

Maybe you are looking for

  • Error when using replacement path variable in exception range

    I'm trying produce a check report that produces exception highlighting based on a range determined by the associated characteristic. eg. For Check 1, highlight cells in red where the associated key figure is between 1 and 999. For Check 2, highlight

  • PDF Portfolio on Flash ActiveX

    Is there any way to open PDF Portfolio's SWF file in Flash ActiveX (Visual C++ project)? How to implement communications between Flash ActiveX and its container? I know that Adobe has public PDF Reference and PDF portfolio is a part of this, but I ca

  • Does CS5 require a discrete graphics card?

    My computer has a Core 2 Duo and 3GB of memory, but only onboard graphics. The CS5 Design Premium system requirements include "qualified hardware-accelerated OpenGL graphics card, 16-bit colour, and 256MB VRAM". Does this mean I cannot run CS5? Or do

  • HT1414 I have a used iphone that has a passcode on it I don't know

    I have a used iphone that has a passcode on it I don't know. I need to reset it but it won't let me connect it to itunes until I turn the passcode off which I can't because I don't know it.

  • Business rule XML facts not visible soa  11.1.1.6.0

    Hello experts, Here comes the description of steps: When dragging a business rule with input and output facts defined(xsd:complexType), in bpel 2 process, in the edit rule dialog box: click on either of the assign input & output tabs to add a copy ru