How Do I Fix Too Many Cards Error?

I am constantly getting the too many cards error whenever I use the web browser. Not to mention that my phone is slow ever since upgrading to Web OS 1.4 and restarts for no apparent reason.
What can be done to resolve this problem?

Unfortunately, for now, it seems that restarting is the only way around it. I'm coming from a Windows Mobile phone where I had to reset practically every day so maybe I'm just used to it, but I don't usually have to reset the Pre any sooner than every 3-4 days and that seems alright by me.
You can reset the phone without taking out the battery by holding down the power button while the screen is on, selecting "power" and choosing the reset option. Alternatively, you can hold down the Orange, Sym, and R buttons together if your phone is too wonky to even bring up the menu.
Hopefully Palm will fix this in their upcoming patch.

Similar Messages

WebOS 1.3.1 Memory Leak? (too many cards)

OK. I am fairly sure 1.3.1 has some sort of memory leak and or other major issues.
I have a I have a Rev A Palm Pre From sprint P199EWW. I have had it since launch with only your typical Pre / WebOS problems.
One of the applications often use is m:Vampire. Laugh if you will it helps me kill time. I have not added ANY new applications since before 1.3.1 and rarely use many other apps outside of the standard core apps. Now after I have updated to 1.3.1 I am getting slow performance, especially with the email and web browser.
Today I was playing m:Vampire and got an email. I taped the email to read it and I got the "too many cards" error. This has never happened previously. m:Vampire was the only application i had been running when the email notification arrived
I have tried rebooting and resting but the problems always seem to come back.
It's really aggravating because I know these issues didn't exist before 1.3.1
Post relates to: Pre p100eww (Sprint)

I got the too many cards issue too today, but I had 8 opens, so i closed 4 of them, waited a bit for the memory to free, tried to open any app again and still the same issue, too many cards. I had a small word document opened for 3 days so I closed it and the problem went away. Either Word doc viewer eats lots of memory if left opened or the the OS doesn't free up memory very well when you close cards.... Dev team should check on that I think.

How to fix: Too many Primary Partitions ? G770

Hello,
I am trying to install PuppyLinuxSlacko.5.4 from a LiveUsb to a unallocated-Partition in my Lenovo-G770 Laptop, Win7 .
My G770 shows that I have two disks: C:\ and D:\ .
But the Using (Linux) GParted program shows there are 4-Primary Partitions already (see pic GParted01.png below) .
http://www.vmars316.com/ShowMe/GParted01.png
And when I try to Format the Unallocated Partition, I get an Error Msg (GParted02.png below) .
http://www.vmars316.com/ShowMe/GParted02.png
Pls, How to fix: Too many Primary Partitions ?
Thanks...vmars316...Vernon

* Questions added to original Post:
I am trying to install PuppyLinuxSlacko.5.4 from a LiveUsb to an unallocated-Partition in my Lenovo-G770 Laptop, Win7 .
My G770 shows that I have two disks: C:\ and D:\ .
But the Using (Linux) GParted program shows there are 4-Primary Partitions already (see pic GParted01.png below) .
http://www.vmars316.com/ShowMe/GParted01.png
And when I try to Format the Unallocated Partition, I get an Error Msg (GParted02.png below) .
http://www.vmars316.com/ShowMe/GParted02.png
Pls, How to fix: Too many Primary Partitions ?
I've been told that to try and fix it in Linux is too risky .
I set up the unallocated 20gb partition.
Can I just merge it into the 29gb Extended Partition ?
If I did merge, How would I access it ? Which Partition is it an extension of ?
I am on thin ice here, and would rather fix the prob in Window7 , because I am brand new to Linux .
Here is the PartitionsDetail using AomeiPartitionAssistant -note the differences:
http://www.vmars316.com/ShowMe/AoemiPartitionWindows.png
Is there a way to tell what's in the partitions , especially the two 29gb partitions and the 14gb partition ?
Worst case: Is there a way to reset my 'Lenovo G770' computer back to factory settings under win7 ?
I think I'll add this Post to the Win7 Forum, since I hope to fix it via Win7 .
Thanks...vmars316...Vernon

How do I open a library book on a recently acquired Samsung Nook? I get "too many activations" error. I have an active adobe digital editions and my other devices work fine. Custumer Support was unable to get the new device activated.

I have a library book on the bookshelf of a newly acquired Samsung Nook but I cannot open it. My other devices work fine but I cannot activate the new unit. I get a "too many activations" error message. Customer Services say I have a valid license but they deemed my problem to be a technical issue and referred me to the forum. Thanks

Step 1 - by trial and error...
So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes. This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure. I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device. Then I copy files from the user's private directories to the public drive space. When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS. Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes. So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes.
I have three huge boxes full of vynl records I've accumulated. The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work. In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

'Sorry, Too Many Cards' message NOT rendering correctly

I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
Thanks,
Post relates to: Pre p100eww (Sprint)

lblumen wrote:
Am getting same message. Since new update was downloaded. Also, I am getting the too many cards open message daily, even when no other cards are open
I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

"Too Many Cards" message

I didn't really know for sure which section of this forum to post this problem, so hopefully this is close.
I keep getting the error message "Sorry, Too Many Cards. Please toss away any you're not using... etc." even though there are no cards open, and it has been a problem for several days.
It's a big problem because it won't let me download updates, view the internet, or even make calls sometimes.
Sometimes it fixes itself when I turn the phone on and off, but sometimes it goes on for up to an hour and it's very annoying.
I'd appreciate any feedback that might help me with this bizarre problem!
Thanks!
Adie
Post relates to: Pixi Plus p121vzw (Verizon)

Hopefully this isn't a silly question, but by "turn my phone on and off" do you mean just hit the power button put the phone to sleep and then hit it again to wake it up? If so, then you need to reboot the phone. That will solve the problem, at least until you've opened enough of the right apps for the problem to occur again.
Go to this page for general troubleshooting tips, including how to reboot your phone: 6Ts of Troubleshooting webOS

There are too many TREX Errors

Hello Experts,
I have created an Index for a specific folder in KM.
Under KM--> Sys Conf --> KM --> Index Administration it shows the green led, which I believe that the data sources are completely indexed. But, under the KM--> Monitoring > KM> Indexing Monitor , it says:
Status = red led (There are too many TREX errors)
Status = Active
In Process = 142678
Indexed = 51345
Errors = 10849
And, when I opened the list of errors there are many Crawler and Trex: Preparation failed: index operation
Can you suggest, what's the mistake that I am doing or do I have to any additional configurations for the index that I have created??
Thanks,
Raghava

Hi Raghava,
as I said, "Preparation Failed" may be (if I recall correctly) as early as the HTTP request to even get the document for indexing. If this is not possible for TREX, then of course the indexing fails.
What I suggested was a manual reproduction. So log on to the TREX host (preferrably with the user that TREX uses to access the documents) and then simply try to open one of the docs with the "failed" status by pasting its address in the browser. If this does not work, you have a pretty good idea what's happening.
Unfortunately, if that were the case, this would the be some issue in network communications or ticketing and authorizatuions, which I can not tell you from here how to solve.
In any case, I would advise to open a support message to SAP - probably rather under the portal component than under TREX, as I do not assume that this stage of a queue error has anything to do with the actual engine.
Best,
Karsten

HT3702 I tried to buy an app but it will not take my card information it said I used too many cards. What do I do to purchase an app.

I tried to purchase an app. But they would not except my card. They said I had used too many cards. What do I do to purchase apps.

Hello there, Amy@186.
The following Knowledge Base article provides some good information on how to proceed:
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
Particularly:
Get help
If you need help changing your payment information, contact iTunes Store support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Too many cards warnings & weak GPS signal

I keep having problems more & more often with my Pre (I'm on the Sprint network, if it matters). At least once a day, I get the 'too many cards' warning, even if I just have one page open. It's especially frustrating when I'm looking at a website (with nothing else opened/running) & want to click on a link but it can't open up because I supposedly have too many cards! The only thing I can do is restart the phone, which takes forever, & then try to get back to whatever website I was on to start over.
The other problem that keeps happening is that the GPS signal is weak when I'm in Sprint Nav & trying to drive somewhere. Having to restart the phone makes navigating somewhere I don't know next to impossible (not to mention unsafe/illegal to operate while driving). And because of problem #1, I have to restart my phone frequently, so I don't understand what's going on. Before the TMC problem, I would just restart my phone when the GPS signal wasn't working & that would solve it, but since I restart it all the time as it is, this is just crazy.
I know that these issues have been addressed before, but I wanted to add another request for Palm to fix these problems (& while you're at it, please add a way to sync tasks & memos with a computer, & add categories to the calendar like in PalmOS!). Has anyone come up with a realistic solution (one that does not involve having to restart ad nauseum)? The only apps I have on my phone are from the app catalog & I don't even have that many of those so memory should not be the issue. Help!

Please search for "iPhone GPS problem - SOLVED".
It's not solved for everyone; I have a problem on a 2G that never got fixed, but the way I read the posts there and my problem there are a number of different causes for this, some of which are software; mine -might' be hardware.
Look over there and try the various proposed solutions and see if any works for more than a small amount of time.
Since you posted back in June you might have found a solution to this, but you're still "unanswered" as of today Sept 25.
I'm noe on Firmware 3.1. Which firmware were you n when you posted, if you can remember? Some people got problems after a firmware update - mine -could- be due to updating from iPhone 2.2.1 to iPhone 3.0.

Too Many Cards??

While trying to download apps from the catalog, I get the message "Too many cards". I'm confused. What do they mean? Am I only allowed to download a pre-set number of apps?

I get the "too many cards open" error message, but I am only opening 1 (like clicking on Web icon) -- so I'm not sure why I would get the message. Any suggestions?
My daughter also gets the same message on her Palm Pixi.

Sorry, Too Many Cards message on Pre

I've gotten this message 5x today and 2x yesterday, with NO CARDS OPEN! I can't do anything on the d--n phone ~ is this more 1.4 bugs??

lblumen wrote:
Am getting same message. Since new update was downloaded. Also, I am getting the too many cards open message daily, even when no other cards are open
I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

Pixi - Freezing/Lag and Not enough memory, too many cards open

Having an issue with my Pixi freezing and stating not enough memory, too many cards open.
Freezing/Lag - when browsing the web, twitter apps or any app that needs internet connection. Only have one card open
Not Enough Memory, too many cards open - I only had two cards open and got this error when trying to open a third card.
There is a thread over in precentral.net regarding a possible issue with the radio/EVDO.
http://forums.precentral.net/palm-pixi/214690-bug-evdo-induced-freezing-lag.html
Post relates to: Pixi p120eww (Sprint)

Dawnette wrote:
Question, I am new user and wondered if the OS updates automatically, or if I have to do something? My Pixi didn't come with a user manual, just a quick start guide.
Palm decided to publish only electronic User Guides in order to save trees several years ago. Your guide is found here:
http://kb.palm.com/wps/portal/kb/na/pixi/pixi/att/learn/page_en.html
You need to find the "Update" app and run it. It will check to see if your phone needs an OS update, or if any programs you've installed from the App Store have been updated.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Too many cards on Palm Pre

is anyone else gettin the message too many cards open please close any you are not using? This is happening without any open. it just happened to me and i had just finished adding a contact and had flicked the contacts off screen and tried to open calendar. i have only had the pre 2 weeks and this has happened 4 times. it is on Bell in Canada. tks
Post relates to: Pre p100eww (Bell)

Hello and welcome to the forums;
What applications are you using just before you notice this error? Some apps such as 3-D games, web, maps, and email can use up a lot of system resources, which may cause this error even after the cards have been closed. Try closing all open cards and restarting your phone by following these steps:
1. Hold down the power button
2. Slide the ringer switch back and forth
3. Repeat step 2
4. Repeat step 2
5. Release power button
6. Wait a few seconds device screen should go black and then reboot
Try then to open whatever application you were getting an error on. Most likely, you will be able to open it with no problem. If this problem reoccurs, or you find yourself restarting your device frequently, you may want to contact our technical support department for further troubleshooting steps.
Hope this helps,
TreoAide

How Can I Fix A QuickTime Codec Error?

How Can I Fix A QuickTime Codec Error?
I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
If I click on the Thumbnail Preview "It" runs.
How can I fix this?
TOP image is the Error message.
BOTTOM image is the Thumbnail Preview info.
I've checked out "Tell Me More" and have not found a solution.

How Can I Fix A QuickTime Codec Error?
The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
or here in the "Format" entry...
Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
use a third-party media player that will open the file, or
use a dedicated media information utility to learn this information....
Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
If I click on the Thumbnail Preview "It" runs.
f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
In short, there are several possibilities here and not enough specific information.

How do I fix the iTunes system error 7 windows error 126?

How do I fix the iTunes system error 7 windows error 126?

Sorry to hear about that
Certainly hope this assists you:
≈≈≈≈≈≈≈≈
https://discussions.apple.com/docs/DOC-6562
≈≈≈≈≈≈≈≈
Please do respond with results/questions.

How Do I Fix Too Many Cards Error?

Similar Messages

Maybe you are looking for