How do I found the character count in a document

How do I find character count and word count in a doumen on my IMc?

Created with which application?

Similar Messages

How do I limit the character count in a text field?

I'm creating a form for co-workers to use when creating web content. I need to restrict their character count for items like headlines, titles, subtitles, etc. Any suggestions on a ready-made form to use out there? And how can I limit those fields so they don't generate content that will then need to be edited down?
Thanks,
EAW

Check out this post:
http://forums.adobe.com/message/4364378
Randy

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How do you get a word and character count of a document in Pages for Mavericks

How do you get a word and character count of a document in Pages for Mavericks?

Hi jonathan,
I struggled with this one as well, as i'm finishing up a PhD thesis and word counts are incredibly important. Through trial and error i found out that words like 'e.g.' and 'i.e.' count as two words and an ampersand (&) doesn't count at all. That being said, i didn't like the fact that the word count always included footnotes and i was dismayed that i couldn't get an accurate count of words in the main body of my text. That all disappeared yesterday when, by chance, while i was copying a completed chapter and pasting it into my main document, i discovered that Pages can indeed give you an accurate word count excluding the footnotes! Here's all you need to do:
1. In pages 5.2, make sure that the Word Count function is first enabled by selecting View --> Show Word Count from the Pages Menu Bar. (If it's already enabled, it will read View --> Hide Word Count, so if that's what it says, then no need to do anything.)
2. Once enabled, check the Word count that's currently showing at the bottom of the page. That's the word count including your footnotes.
2. Now, place your cursor anywhere within the current document, then hit command+A (for Select All).
3. Viola! Your word count now shows the actual number of words within the body of the text only, excluding footnotes!
Hope that helps!

How can I increase the character limit of my text messages for Droid Maxx 4.4?

How can I increase the character limit of my text messages for Droid Maxx 4.4?

Send as a MMS.

How do you get the page count on an old hp 1012 laserjet printer?

How do you get the page count on an old hp 1012 laserjet printer?

You should find this information on the configuration page. To print a configuration page, press and hold the green GO button until all of the lights cycle, approximately five seconds, then release the button. The Configuration Page will print.
You can find more information in this document: Identifying Page Count.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - -

How do I delete the number count on deleted sent emails

How do I delete the number count on deleted sent emails

Should there be sent items in your sent items list? I'm thinking you may need to just reboot your iPad.
Press and hold BOTH the power and home buttons at the SAME time until the Apple Logo appears, then let go of both buttons and your iPad will restart. Youwon't lose any data or settings.

How do you resize the pixel count from 4000 to 1600 in iPhoto

How do you resize the pixel count from 4000 to 1600 in iphoto?

In the Export Dialogue (File -> Export) note the options at Size. This will allow you to specify a maximum length or breadth for the shot.
Regards
TD

The character count in Messaging isn't there

I've got the character count option turned on in Messaging but I can't see it anywhere on the screen.

Character count appears ins SMS messages above the Send button once you've typed about 30 characters. It's in light grey so you may have missed it. It will never appear in iMessages because they have no character limit.

How can I bring the recordset count inside the same recordset?

I have a query inside a procedure where I'm paging the results.
I dont know how to bring the total results inside the recordset.
How can I bring the recordset count inside the same recordset?
SELECT *
FROM ( select a.*, rownum rnum
     FROM (SELECT
          FROM table
          ORDER BY id DESC) a
     WHERE rownum <= pg*50 )
WHERE rnum > (pg-1)*50

My query is much more comples, so that is why I'm using the other script.
When I included the "COUNT(*) OVER() tot_cnt AS total" it didn't worked:
ORA-00904: "TOT_CNT": invalid identifier
What is the tot_cnt?
SELECT *
FROM (SELECT a.*, rownum rnum
FROM (SELECT
ed_fotos.id AS COD_FOTO,
ed_fotos.arquivo AS NOM_ARQUIVO,
ed_areas.nome AS NOM_REDACAO,
COUNT(*) OVER() tot_cnt AS total
FROM edt.ed_fotos ed_fotos
INNER JOIN edt.ed_volumes ed_volumes ON ed_volumes.id = ed_fotos.volume_id
INNER JOIN edt.ed_caminhos path_alta ON path_alta.id = ed_volumes.caminho1
INNER JOIN edt.ed_caminhos path_baixa ON path_baixa.id = ed_volumes.caminho2
INNER JOIN edt.ed_areas ed_areas ON ed_areas.id = ed_fotos.redacao_id
ORDER BY id DESC) a
WHERE rownum <= 200 )
WHERE rnum >= 100

How can I get the shutter count for my Canon 7D Mark II using Windows XP?

How can I get the shutter count for my Canon 7D Mark II using Windows XP? I've been looking lots of places and doing some file uploads, but I can't seem to find anything. I'm wary of downloading software I know nothing about. Any help is greatly appreciated.
Solved!
Go to Solution.

Nevermind, just, sort of answered my own question. Doesn't work on XP, but using a Win 7 'puter I was able to use Shutter Count, which now works w/ the 7D Mark II.

How do you convert the encoder counts to RMP of the motor using a myRIO in LabVIEW?

My intent is to gain hardware interfacing and general Labview experience. I am using a myRIO to control a Pittman 8222 34V Brushed DC motor (Motor Specs).
I recently created a code to control the angle of this motor using PID, which was visually implemented using the black disc with a white tick mark on it (see attached picture: "IMG_2523").
I now want to control the speed of this motor againg using PID, but I am not sure how to properly convert the encoder counts to RPM of this motor. I have attached 2 screen shots of my block diagram and my front panel for reference ("Capture" and "Capture2"). In the front panel picture, you can see my "actual" speed of the motor is a very choppy signal when it should theoretically be a flat line. To get the RPM, I currently use a shift register to store the current count value (which I converted to deg, then to radians), and then subtract the previous run's value, then divide by the while loop sampling time (10 ms). This would give me rad/s, which I then wrote a subVI to convert it to rpm.
Any help would be greatly appreciated, thanks.

Hi,
One thing you could try doing is verifying that the conversion from rad/s to rpm is working correctly.
This tutorial might also be helpful. It's not using the same hardware that you are, but goes through the general steps using PID control.
CompactRIO Motor Control Basics Tutorial: http://www.ni.com/pdf/labview/us/compactrio_motor_control_basics.pdf

How do you find the word count on MacBook, please?

How do you find the word count on MacBook, please?

If you are trying to find word count in a Microsoft Word 2011 documemt, for instance, open the document and go to the Tools menu, selecting Word Count. In Apple's Pages application, open the document and look at the bottom of the page, near the left it will say "X Words" where X is the number.
Best of luck.

How can i set the character set ???

hello
now i have the following
Message msg =
new MimeMessage(Session.getDefaultInstance(props, null));
how can i set the character set to be 'windows-1256'
pleaze help if u can
thanks very much
Belal

You have to deal with the NLS_LANG environment variable,it is defined as NLS_LANG=<Language>_<Territory>.<clients characterset> .
Where is your oracle client installed? On the the server machine, where the database resides , on another Unix system or is it a Windows client? On Windows NLS_LANG is directly related to the OS settings and stored in the registry, on Unix NLS_LANG is not set automatically and defaults (if not set) to AMERICAN_AMERICA.US7ASCII. If you are working on UNIX, this could be the reason for disordering. I'm not familiar with Chinese, so I don't know the correct setting , but a good approach would be same setting as on the server.
Metalink note 158577.1 describes NLS_LANG very detailed.

How can i compare the character fields?

I have a requirement to compare the character fields .
I have to compare the 2 character fields of a table CDPOS
As follows .
If CDPOS-VALUE-OLD GT CDPOS-VALUE-NEW
      Populate    REDATED = YES.
ELSE
      Populate REDATED = NO.
My doubt here is how can we compare the character fields.?
   When I do Extended Program Check: I am getting error like this ?
Greater than/less than comparisons with character type operands may not be portable
Please give me idea .
Thanks ,
Suresh Kumar.

Hi suresh,
DATA : a TYPE char10 VALUE 'DBCD',
       b TYPE char10 VALUE '4234',
       c TYPE char10 VALUE '3456',
       d TYPE char10 VALUE 'ADA',
       e TYPE char10 VALUE '234567'.
IF b GT c.        "this case checks for numeric values
WRITE :/ 'B is bigger'.
ELSE.
WRITE :/ 'C is bigger'.
ENDIF.
IF a GT d.      "this case checks for alphbetical order
WRITE :/ 'A is bigger'.
ELSE.
WRITE :/ 'D is bigger'.
ENDIF.
IF strlen( a ) GT strlen( d ). "this case checks for no of chars
WRITE :/ 'A is bigger'.
ELSE.
WRITE :/ 'D is bigger'.
ENDIF.
IF a GT c.      "this case first alph then numerics
WRITE :/ 'A is bigger'.
ELSE.
WRITE :/ 'D is bigger'.
ENDIF.

How do I found the character count in a document

Similar Messages

Maybe you are looking for