New Field In Database table

Dear Gurus,
If some standard SAP field is added in a standard database table as a part of upgrade. Is there a way we can find out when that field is added to the database table.
Regards,
Subhajit

hi Subhajit,
use the table DBTABLOG,CDHDR,CDPOS ...it will contain the change made by the responsible person and time...
hope it helps.....

Similar Messages

  • How to tracke the new entries in database table ?

    Hi,
    How to tracke the new entries in database table ? is there any FM or report is there to check it ?
    regards
    vishnu

    Hi Vishnu,
    u can write a report program for this and in that use the event  :
    AT NEW <field-name> ( use primary key)
    your statements
    ENDAT
    for eg.
    loop at itab ( herfe itab must be of type of table for which u want to track new entries)
    at new matnr
    write:/ new record
    endat
    endloop.
    schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
    regards
    Vinod

  • Add time field in database table

    Hi Gurus,
    I am trying to add a time field in database table. I know i can add it by using append structure.
    but my problem is when records r creating in database table, the time field also populate with respective system time automatically. i think i need to use events but i have no idea how to use.
    is there any other method available?
    is there any system field for time stamp as date + time?
    Regards
    Giri

    Rob,
    its not updating by table maintainance generator.
    I want to add Time field in table ESTDH. 
    when a new record updated while report version generated the time field also populate with system field.
    is it possible?
    can anybody help me?
    Regards
    Giri

  • Adding a new field to the table

    Hello friends,
    I have a custom table and is in  use from a long time now.
    Now i need to add a new field to that table.
    1 - can i go directly to the change mode and then add it or is their any other way that needs to be followed.
    2 - once added do i need to go to SE14 and do something thr for the changes done to the table.
    This table also has a table Maintenence generator. Do I need to do something thr.
    Thanks,
    Bob.

    Hi,
    Check whether the change in ur custom table is going to impact any Custom program or not.
    If its so then adjust ur ABAP code so as to fit with the new table.
    Decide whether this field is going to be aprt of primary key or simple field.
    Is there any data present in ur custom table already?
    Regards,
    Lakshman.

  • Add a new field to existing Table

    Hi , We want to add a new field to existing table from ECC  and populate historical data .
    We have already extracted data from ECC to VBAK Table . We have to add a new field - Incoterms in HANA . This field exists in ECC .
    Please guide.

    Hi Vicky,
        I dont think you can add new fields to the condition table once you have activated the condition table.
    SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
    Please refer to the below link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
    What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
    Hope this helps.
    Regards
    Raj

  • How to add new fields  to a table control in a standard transaction JHA3X

    Hi All,
            We have a requirement where we have to add two new fields  to  a table control
            in a standard transaction JHA3X .
           We don't want any changes into our standard code and also we don't have any USER EXIT for that
           screen.
           Please provide with some solutions for the same .
           Thanks in advance .

    You will need add this to the /var/clientlibs/libs/cq/security/widgets.js and add the field under the 'CQ.security.UserProperties'.  For example, if you wanted to add a field to show the 'Middle Name' under the 'First Name' field, you can try adding the following:
                "items":[{
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Login"),
                        "anchor":"100%",
                        "disabled":true,
                        "allowBlank":false,
                        "name":"rep:userId"
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("First Name"),
                        "anchor":"100%",
                        "name":"givenName"
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Middle Name"),
                        "anchor":"100%",
                        "name":"middleName",
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Last Name"),
                        "anchor":"100%",
                        "name":"familyName",
                        "allowBlank":false
    Hope this helps.
    -Ron

  • How to add a value table to a field in database table?

    Dear Experts,
    Normally a value table can be added in the domain.
    And the field of the database table will have the value table, to which this domain is assigned.
    My question is.. Is it possible to assign a value table to any field ina database table, directly?(i.e. <b>without assigning to that domain</b>)
    If yes.. please let me know the <b>step-by-step</b> procedure clearly.
    Thanks to U in advance.

    Hi sr,
    1. what is the purpose of your value table ?
      -- so that the user can select values
       from some master table , for that field !!!!
    2. This is done by
        CHECK TABLE (foreign key concept)
       (and not value table)
    3. When we create a check table for a field,
       then
       some DEFAULT table is PROPOSED
       . that DEFAULT table is nothing
      but PICKED up from the domain of that field,
      and shown from the value of VALUE TABLE.
      (we can change it however)
    4. so for your purpose,
       just create a CHECK TABLE.
    regards,
    amit m.

  • Adding new field in customized table ZPM_QMEL_EXT

    Hi all,
    My requirement is  to add a new field in ZPM_QMEL_EXT table numeric field no of  months due (ZZ_CO_MON_DUE) .
    Its value will be calculated as the # of invoices that were paid vs. what has not been paid and then from there, value of this field will be fetched.It has to be populated during the time of notifcation screen entry (iw51). The logic will be similar to this
      SELECT FAEDN FROM DFKKOP INTO TABLE IT_DU_DT
                                  WHERE GPART EQ WA_QMEL-KUNUM AND
                                        VKONT EQ WA_QMEL-ZZ_VKONT.
        SORT IT_DU_DT BY FAEDN ASCENDING.
        READ TABLE IT_DU_DT INTO WA_DU_DT INDEX 1.
        MOVE WA_DU_DT-FAEDN TO DUE_DT.
        CALL FUNCTION 'HR_MONTHS_BETWEEN_TWO_DATES'
          EXPORTING
            I_DATUM_BIS = SY-DATUM
            I_DATUM_VON = DUE_DT
          IMPORTING
            E_MONATE    = NO_MT.
        IF NO_MT IN P_DU_MT.
          WA_QMEL-DUE_MONTHS = NO_MT.
    Awaiting your kind help .
    Thanks
    hariom.

    Hi,
    There is only one option to include extra field for standard tables that is Append Structure other than we don't have any option.
    For Customizing tables we can use Append structure as well as Include Structure.
    Rules: Append Structure should be in last in Field column but include structure you can insert in any where it means between the fields.
    Delivery class option  and data class will take care automatically while upgrading the sap system one version to Another version.(upgrading).
    For that you should maintain the those properties when data base table creation.
    i hope the above information may helpful to you.
    Best Regards
    Sreenivas Pachva

  • Add a new record in database table without using table maintance generator

    Hi Expart ,
                  Plz. tell me how to add new record in database table without using table maintance ganerator ....give me one ex.
    Regards
    Bhabani

    Hi,
    The other way to safely handle the modification of tables is through is by programs that can be done with SE38 or SE80.
    To insert into database table we use INSERT statement :
    1. To insert a single line into a database table, use the following:
    INSERT INTO <target> VALUES <wa>.
    INSERT <target> FROM <wa>.
    2. To insert a several lines into a database table, use the following:
    INSERT <target> FROM TABLE <itaba>.
    Or even we can use MODIFY statementas this single statement is used to insert as well as update the records of database table.
    MODIFY <target> FROM <wa>.
    or MODIFY <target> FROM TABLE <itab>.
    thanx.
    Edited by: Dhanashri Pawar on Sep 10, 2008 12:25 PM
    Edited by: Dhanashri Pawar on Sep 10, 2008 12:30 PM

  • How  to implement PCCD001 exit for new field in AENR table

    Dear experts,
    I am implementing PCCD0001 exit for a new field in AENR table secnario below.
    Tcode CC31/CC32/CC33 required additional field which stores value in AENR table. in AENR in implemented include(CI_AENR) and added new field. After i implemnted PCCD0001 screen exit for CC31/CC32/CC33.
    in that two function exit are there, one for passing data to  screen EXIT_SAPMC29C_001
    another for getting data from screen EXIT_SAPMC29C_002.
    which table or structure i use to place field in screen exit to pass data to EXIT_SAPMC29C_002, in this function i don't have import parameter.
    Adv. thanks,
    Venkey

    Hi sekhar,
    Your Requirement can be implemented by OVS(Object Value selector) This is the custom search help .So that you can define on what basis the value has to be fetched.
    Look at the below link
    http://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
    You need to use the component WDR_OVS.
    It has 3 phases
    In phase 1
         You will fetch the value from input field to F4 help dialog box.
    In phase 2
         You will generate the search results , in this phase look for the input value given in field 2 and accordingly generate search result for the field 3.
    In phase 3
         The selected value will be returned to the original screen.
    Regards
    Karthiheyan M

  • Adding a new field in QM02 table control

    Hi Gurus,
    I have the requirement to add a new field in a table control in QM02.I have added the field in the view VIQMMA but I dont know how it can be added in screen.
    Is it possible through some SPRO customization?
    Regards,
    Rajat

    Hi Rajat,
    Welcome to SCN. I am not sure add to table control . Please have a look to add custom fields
    1. QQMA0001-incorporate additional data in notification header
    2.QQMA0008-additional data on the details screen fro notification item
    3.QQMA0010 QM/PM/SM: User Subscreen for Additional Data on Cause
    4.QQMA0011 QM/PM/SM: User Subscreen for Additional Data on Task
    5.QQMA0012 QM/PM/SM: User Subscreen for Additional Data on Activit
    If you need a custom tab then this is the procedure
    1) SPRO,Quality management,Notification,Overview of notification types, Select the notification  and 90 give the customer specific screen area
    2) function group XQQM ,create the screen under screens tab number 0090.
    Check this if need this and check and post.
    Regards,
    Madhu.

  • Delete L.H.S spaces from field in database table but not for Report

    Dear Experts
    I m facing a problem...actaually i have replaced 999 by blank in a field of database table record.
    Like :     999 abcde
                 999999 hjklmn
                 9999 klplmj
                 99999 hjsfhh
    I have replaced 9 by blank. and using CONDENSE statement i have avoid the left hand side spaces of 9 in the database table.
    Means the data is updated in database table following below using Condense.
    Like:     abcde
                hjklmn
                klplmj
                hjsfhh
    Now,  the problem is that these spaces is showing in the Report. The left hand side spaces is not deleting from the Report. But these spaces is not showing in the databse table.
    Plz tell me wat is the reason and wat is the solution to avoid these space from the Report.
    Note: That field is Character Field.   KNA1-STRAS
    Thanks and Regards,
    Swapnika

    Hello
    Try to use
    SHIFT c LEFT  DELETING LEADING SPACE.
    instead of
    CONDENSE...

  • Inserting new records into database table at runtime

    Hi all ,
    How to insert new records into database table at runtime on click update?
    Thanks.

    Hi Sasikala,
    Just for your understanding am giving a sample code snippet which you can use to read the contents of your Table UI element & save the data on to your database. Suppose you have a button up on pressing which you want to read the data from your screens table & save on to the database then you can proceed as shown below:
    1) Obtain the reference of your context node.
    2) Fetch all the data present in your table into an internal table using methods of if_wd_context_node
    3) Use your normal ABAP logic to update the database table with the data from your internal table
    In my example I have a node by name SFLIGHT_NODE and under this I have the desired attributes from SFLIGHT. Am displaying these in an editable table & the user would press up on a push button after making the necessary changes to the tables data. I would then need to obtain the tables information & save on to the database.
    data: node_sflight           type ref to if_wd_context_node,
            elem_sflight           type ref to if_wd_context_element,
            lt_elements            type WDR_CONTEXT_ELEMENT_SET,
           stru_sflight           type if_main=>element_sflight_node,
           it_flights             type if_main=>elements_sflight_node.
    "   navigate from <CONTEXT> to <SFLIGHT_NODE> via lead selection
        node_sflight_node = wd_context->get_child_node( name = 'SFLIGHT_NODE'  ).
       lt_elements = node_sflight->get_elements( ).
    "   Get all the rows from the table for saving on to the database
        loop at lt_elements into elem_sflight.
          elem_sflight->get_static_attributes( importing static_attributes = stru_sflight ).
          append stru_sflight to it_flights.
        endloop.
    " Finally save the entries on to the database
        modify ZSFLIGHT99 from table it_flights.
        if sy-subrc eq 0.
    endif.
    However a word of caution here.... SAP doesn't ever recommend directly modifying the database through an SQL query. You would preferably make use of a BAPI for the same. Try go through Thomas Jung's comments in [here|modify the data base table which is comming dynamiclly;.
    Regards,
    Uday

  • Fields missing in SM30 after adding new fields to the table

    Hi ABAPers,
    I added a new field & marked another field as primary key in the table. Then I generated the table maintenance view for the table in SE55 and adjusted Database utility SE14.
    When i saw the table in SM30. The number of fields in the overview screen of SM30 shows less field then existing in table. i.e in my table i have 10 fields(3 primary). in SM30 it shows only 5 fields(3 primary + 2 normal fields)
    In SE51, the overview screen of the table show less fields in the field list..
    I want all the fields in the Table maintenance overview screen. Please suggest me a way forward friends..
    Note: the system is 4.0B.
    Thanks...Suresh Kumar

    Hi
    You have to re-generate your dialog for SM30 by table maitenance generator.
    - From Se11 go to table maitenance generator
    - Choose update icon
    - Set flags for NEW FIELD
    - Go to expert
    - Set flag to re-generate dynpro
    Message was edited by: max bianchi

  • Add a new field(from transparent table) to the infoset

    Hi,
    I need to add a new field to the existing infoset in HR. I found that field exist in the CSKS table. in the infoset they are using PNP logical database. As per my understaning i have to link the CSKS-KOSTL with P0001-KOSTL.
    Could you tell me how to do this?
    Please do the needful.
    Thanks & Regards,
    Krishna.

    Hi,
    I have added that KOSAR in the additional fields and i added the code for that like
    clear kosar.
    select single kosar
      into kosar
      from csks
      where kokrs = p0001-kokrs
        and kostl = p0001-kostl.
    Is it will work now? One more help how to add this change to the transport?
    Please do the needful.
    Thanks & Regards,
    Krishna.

Maybe you are looking for