How do I generate a compiled app with a user interface running real-time?

Hi everyone,
I've developed a simple application that uses a PXI chassis to run. It toggles some discretes and does some simple things, but it doesn't really have any "real-time" requirements. We're just using the PXI chassis because we have it and we need the discrete I/O.
My question is this - how can I convert this application to a compiled real-time app and yet maintain the front panel on the local PC. LabView appears to simply do this for me. I am connected to the real-time target via ethernet. When I compiled the program, it puts it in the target's startup directory, but how do I run the front panel from the local PC?
Thanks,
Jason

Hi Jason,
Below are some links that should get you started with deploying an application onto your real-time target and then controlling it from a PC that does not have the LabVIEW Development environment:
http://digital.ni.com/public.nsf/websearch/C90410C685CFF89786256C24005AC027?OpenDocument
Launching code on the RT target:
http://zone.ni.com/devzone/conceptd.nsf/webmain/7D7CFAFF379531B086256AC70058812B?opendocument&node=1...
Deploying and launching a real-time app:
http://zone.ni.com/devzone/conceptd.nsf/webmain/9ac4955881bd7b4d86256d0b0061dd1c
Application Builder and RT PXI controller:
http://zone.ni.com/devzone/conceptd.nsf/webmain/81b6674f3556599b862568cf005d26c6
RT good programming practices (use RT communication wizard for easy implementation):
http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&E4C4DCD9C00295A186256B5100665BF5
RT Communication Wizard:
http://zone.ni.com/devzone/conceptd.nsf/webmain/a6f17ee4adcab99686256d5e0053e210
I would suggest going through these tutorials and documents, they should provide you with what you need to get started. Please don't hesitate to ask any questions that you have a long the way.
Bryan Snarr
Field Engineer
Northern California
National Instruments

Similar Messages

How to add admob in android app with dreamweaver

how to add admob in android app with dreamweaver ?

flash-air-admob-ane-for-ios-and-android - Admob Ane,a adobe native extention(ANE) for actionscript developer to add go…
code and demo.but you need upgrade to flash cc.

HT1311 How can I get updates for apps with new Apple ID

How can I get updates for apps with new Apple ID. I have apps that I got for free, and some that I have purchased. I had to create a new Apple ID because I don't have a credit card now.

Apps will always be tied to the ID in which they were purchased or downloaded under. You can not change this unless you buy or download the free app using the new ID.

Please, I need help - How can I generate a text file with Word format?

Hello friends at www.oracle.com ,
is it possible for me to create a text file - that is, with TEXT_IO.fopen, and so on - that's already formatted as a Word document?
We have a Forms program here, where it's needed to generate a text file with .RTF format, 8 centimeters margin, Times New Roman font, with size 7.
Best regards,
Franklin Goncalves Jr.

Hello Shay,
sincere thanks for your answer. And, to answer your last question, I'm using client-server model.
Since I couldn't create this .RTF file by using built-ins like TEXT_IO, I tried to generate an .RTF file using Reports, passing the parameters DESTYPE, DESNAME and DESFORMAT, as shown below.
add_parameter (pl_id, 'DESTYPE', text_parameter, 'FILE');
add_parameter (pl_id, 'DESNAME', text_parameter, 'c:\franklin.rtf');
add_parameter (pl_id, 'DESFORMAT', text_parameter, 'RTF');
However, the just generated .RTF file is uncomprehensible. After opening the file at Microsoft Word, I can see the following message at the top of file:
This file was created by Oracle Reports. Please view this document in Page Layout mode.
... and informations doesn't appear as desired.
If I can't generate such text format by using TEXT_IO, and if generating an .RTF file through Reports shows me an incomprehensible result, how can I export the selected result to an .RTF file?
When Reports is opened, choosing Generate to file -> RTF doesn't export anything.
Thanks, and best regards,
Franklin Goncalves Jr.

HT2534 How can I download a free app with an existing Apple ID without to give my credit card infos?! The ID ist already made...

How can I download a free app with an existing Apple ID without to give my credit card infos?! The ID ist already made...

Sorry, but you can't. The process only works when creating a new Apple ID. With an existing ID you'll have to provide a payment method at least temporarily.
Regards.

How can I share my iTunes library with another user on my laptop?

How can I share my itunes library with another user on my laptop?

If you type "Shore itunes library" into the search bar at the top of this page by "Support" you will find:
iTunes: How to share music between different accounts on a single computer

How can I display the vendor associated with result of my running total sum

I have a report that lists vendors with their most vecent order dates. I need to set up a rotation so that the vendor with the latest order date is next to be selected. I used the running total summary to pick the latest date. How can I display the vendor associated with result of my running total summary?

If your "latest" order date means the "oldest" order date, why don't you try this:
Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
This will make your oldest order your first record shown.
You can then create a running total count for each record.
Lastly, in your section expert under conditional suppress X+2 formula, write this:
{#CountRecords}>1
The result will only show the oldest record in your report.
I hope that helps,
Zack H.

How can I map the composite_dn name with a composite in run time

Hi All,
I want to craete a report on number of total business and system faults with the help of Information Publisher in OEM 12c Cloud Control. I am fetching data from the table composite_instance_fault present in SOAINFRA schema. Below os my SQL statement:-
select error_category,count(error_category) from prefix_SOAINFRA.composite_instance_fault where composite_dn=??EMIP_BIND_TARGET_GUID?? group by error_category
Now I want to know that how can I map the composite_dn name with a composite in run time. When we fetch data from the repository we used to map target in rumtime by using ??EMIP_BIND_TARGET_GUID?? but here as I am not fetching data from repository, how can I map target in run time.
On executing the above SQL statement its returing an empty table without any data.
Please guide!!
Thanks in Advance!!

Hi,
try something like this.
Mike
Attachments:
Unbenannt 5_LV80.vi ‏12 KB

Can't Open 3rd party Apps with my User (Icon Bouncing then Application Not Responding)

Hi
Problem:
I can't Open 3rd Part Apps with my user (FireFox, Chrome, Dropbox, GoogleDrive, Mega, Final Cut Pro X, etc) they just star bouncing and after a while they stop bouncing then i righ click on them and it says "Application Not Responding", but i can open native apps like Safari, iTunes, iMovie, Finder, Settings
Other Events:
-Just Before this happend i was editting a video on FCPX, y export it and tried to upload to Google Drive (in Chrome), when it was uploading I closed FCPX and the uploading stop it at 91%, y tried to reupload but then I realized that this video was in a temp folder and it wasnt there anymore, so I open FCPX to export it again and i couldnt, it was just bouncing and then "App not responding".
-After Installing Yosemite i feelt it slow even after it finished the encriptation File Vault, specially in chrome.
I have tried:
1-Repair Disk Permisions
2-Reset SMC
3-Reinstall FCPX
4-Decrypted the Disk and create another user and i was able to run Chrome, FireFox and FCPX, When I opened FCPX it started but when it was trying to open the project that i was working , it restarted the app and i couldnt open FCPX again, just bouncing and App Not Responding
Any suggestions to keep my User working?
Macbook Pro Mid 2012
-OSX Yosemite,
-16GB Ram1600MHz DDR3
-750GB 5400RPM
-2.9GHz dual-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 4MB L3 cache

Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/
Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive. This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from). You would boot from the clone, then reverse-clone it back onto your internal hard drive.
If you are really serious about being highly confident of not loosing files, you could use both - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

How do I privately share Keynote file with PC user?

How do I privately share Keynote file with PC user? ShareFile is having trouble with Keynote support. iWork is no longer functioning and I can't tell if ICloud supports this feature. When I export to a Powerpoint all links are lost. It will take me hours to redo in SkyDrive Powerpoint.
Need solution!

I use dropbox
Dropbox

How to uninstall a specific sideloaded app for mutiple users from windows 8.1 through windows power shell?

I have sideloaded a windows 8.1 app for mutiple
users in the device using the following command in windows power shell:-
DISM /Online /Add-ProvisionedAppxPackage /PackagePath:”packagepath” /SkipLicense
Now i want to un-install the same app for mutiple
users in windows 8.1 since i want to install latest package of that app but i am not able to un-install the app for mutiple
users in windows 8.1 using windows power shell
This is what i have tried :-
DISM.exe /Online /Remove-ProvisionedAppxPackage /PackageName: "PackageFullName"
This what the error i am getting:-
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Error: 2
The system cannot find the file specified.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Am i missing anything ??
1)How to un-install a specific app for mutiple users in windows 8.1 using windows power shell??????
2)What are the variousways/Alternatives to un-install a specific app for mutiple users in windows 8.1 using windows power shell??????
Please let me know
Looking forward for your response
Thanks in advance

I am getting the same error, though I have verified the package name is correct. I am trying to uninstall the Reader App from a captured WIM (offline). Any suggestions?
dism /image:c\mount Get-ProvisionedAppxPackage Result:
DisplayName : Microsoft.Reader
Version : 2013.822.1823.785
Architecture : neutral
ResourceId : ~
PackageName : Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe
Attempt to remove the app returns this same error message:
C:\WINDOWS\system32>dism /image:c:\mount /remove-provisionedappxpackage /Package
Name:Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Error: 2
The system cannot find the file specified.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
The error is accompanied by the following entries in the error log:
2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed to get staged packages for package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'.
- CPackageAdapter::CreateForRemove(hr:0x80070002)
2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed while initializing package adapter for package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'
- CAppxManager::RemoveAllUserAppx(hr:0x80070002)
2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed to remove package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'
- CAppxManager::ProcessCommandRemoveAllUserAppx(hr:0x80070002)
2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed processing command to remove Appx package - CAppxManager::ExecuteCmdLine(hr:0x80070002)

How can I share applications and softwares with different users of the same computer?

First question: How can I share applications and softwares with different users of the same computer?
Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
Yes. Separate user accounts, help here > How to use multiple iPods, iPads, or iPhones with one computer

How do I share my tunes library with another user on same mac?

how do I share my tunes library with another user on same mac?

Click here and follow the instructions.
(107187)

How to make the exchange of data between 2 while loop in real time

hello
I have 2 while loop
the 1st while loop includes the data acquisition program
the 2nd while loop includes the control program
my question is how to make the exchange of data between 2 while loop in real time
I tried with the local variable and direct wiring between the 2 while loop
it does not work (there is a delay)
Solved!
Go to Solution.

Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments

How can we generate a pulse train with variable inster pulse delays?

I want to generate a pulse train with random inter pulse delays (100us-10000us) and the pulse width would be 50-100us. I programmed for single pulse generation using counter cfg,a for loop contaning set attribute parameters pulse spec 1 and pulse spec 2. I changed the pulse spec 1 value in every cycle
This program is generating the pulses but not the exact values in the sense the some times the delays are more than 10 msec. As per the program the delay should be maximum 10 msec. please help me ASAP.
thanks
thota

Hey Thota,
I would suggest to take a look at the example program linked below. It shows how to change pulse specs on the fly. You have to be make sure you are ignoring a certain error when doing this.
Pulse Train Generation with Changing Pulse Specs (PWM)
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E21756A4E034080020E74861&p_node=DZ52328&p_source=External
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

How do I generate a compiled app with a user interface running real-time?

Similar Messages

Maybe you are looking for