How do i get sound to my mixing board?

I am doing a media presentation and need the sound from my MacBook to connect into a sound board at a church...they have Microphone and 1/4" inputs...what do I need to do to make this work?

Cheapest way is just connect the Audio out / headphone, from macbook to the board. Stop by radio shack and tell them you want to connect 1/8" stereo to two 1/4" mono's.

Similar Messages

I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!

How do I get my old Surround Mixer recording sources back?

I recently had my computer repaired where I basically had a complete overhaul. In the process they installed a second soundcard (the one that went with the new motherboard) alongside my original Creative Sound Blaster Audigy card (Sound Blaster Audigy Platinum eX). Before, when I would record audio into my computer, I opened the Surround Mixer software and in the record pulldown menu it showed all of the inputs as they relate to my Audigy interface (SPDIF, Aux In 2, Line In 2, etc.). Now when I open the Surround Mixer software, I only get generic options such as Analog Mix, CD Digital, Microphone, etc. and therefore I can't get any outside audio into my computer.
I figured the computer?was defaulting to the?new sound card so I disabled the onboard audio in my BIOS and then installed the Creative Sound Blaster Series 2 Driver. I clicked on the driver and it said that it needed to uninstall another driver that was already there. The install went a little funny and it got hung up a couple of times. Then, I couldn't get Surround Mixer to work at all so I went to the Creative website and installed Software Auto Update. I downloaded and installed all the critical components?but that also went a little funny. It took about three tries and it didn't seem like it actually finished installing, but when I checked on Auto Update again, it said that I was up to date and that everything had installed. I noticed at the beginning that it installed a new version of Surround Mixer but when I opened it later, it still had those same generic options, not the the ones that match my external interface.
What do I need to do to get my original settings back?
Message Edited by audiodrome on 04-30-2009 06:46 PMMessage Edited by audiodrome on 04-30-2009 07:32 [email protected]

>Re: How do I get my old Surround Mixer recording sources back?p audiodrome,
Is the external Audigy Dri've properly connected? Does the Plat Ex have the rear jacks? If so, can you record from the rear LineIn or mic jack and play sound files through headphones or speakers? What happens when you run the Creative Diagnostic? What does Device Manager show? Otherwise, yes, uninstall and reinstall the Creative software. If your install CD has a repair option, try that first. However, you may find you need to remove the Audigy from your PC, reboot without it, and then reinstall everything. Some Soundblaster cards don't play well with some integrated soundcards, so you may also want to disable the integrated soundcard in BIOS.
Message Edited by Katman on 05-04-2009 :00 AM

How do I get sound out when I plug in a USB mic?

How do I get sound out when I plug in a USB mic? I cannot hear my instrument tracks either. It will record my vocals, but I can't hear them. If I unplug the mic and restore the internal devices, then I can hear all tracks, including the vocals. I'm sure there's a simple solution.

Hi
Prior to Logic 9, you cannot separately choose Input/Output audio devices, so you either have the USB Mic, or the Built-in audio (or an external audio interface).
To set up for 'mixed' devices, you need to use AudiMIDI Setup (Utilities folder) to create an Aggregate Device.
http://support.apple.com/kb/HT3956
Note that I recall that it was 'sensitive' to which order you create the devices with some USB Mics.
HTH
CCT

How can i get sound on BOTH imac and apple tv

The sound works fine on the apple tv Television but goes off on the iMac
Video works on both, so How do I get sound on Both when mirroring?

Go to Settings > Messages > Receive At. Use the same Apple ID. Make sure the phone numbers/email addresses you want to receive messages at are checked.

How can I get sound from tv or stereo when watching netflix on MacBook Air?

I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook. How can I get sound from other sources ie tv or stereo?

Check with Netflix for their system requirements.

How do I get sound & video from my MacBook Pro (mid 2009)?

When I connect My MacBook Pro (mid 2009) to my HDMI TV I get a good picture but no sound. I use two cables, one fron the Mini DisplayPort and the other from the headphone jack. How do I get sound on my TV from my macbook pro?

Solution may be found if you search in the "More Like This" section over in the right column and by doing a forum search.

How do I get sound on my TV from mo macbook pro?

How do I get sound on my TV from mo macbook pro?

Depends on what you want to do, do you want to play music or video?
If you have a Macbook that supports thunderbolt just connect it with a hdmi cable (if you want picture as well). If your mac doesn't support thunderbolt you could connect via the standard headphone jack. But still it depends on what you want to do. So...
What do you want to play... (music, video)?
What does your tv support (hdmi, digital audio (s/pidf?)?
This helps narrowing down your solution.

How do I get sound on Ipad without earphones?

How do I get sound on Ipad without earphones? Or is it possible to get sound on Ipad without other software?

The iPad includes an external speaker.

How do I get sound to work for games...?

How do I get sound to work for game apps, when I have sound for other items on ipad2?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How do I get sound to work on games?

How do I get sound to work on games, sound work on everything else exept when I play app games since I got the phone, any ideas how to get to work?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How do I get sound when I record videos on my ipad?

I can record videos using the camera app - however, there is not sound. How do I get sound?

Thanks - this is good to know. I actually ended up going to Google - which took me to Youtube - which showed me my volume button. Oy. I felt sheepish. However, this is on loan to me from my work - and up until now - it has "lived" in a manila folder in my file cabinet. For a first day, I'm doing well.
It's good to know that I can inadvertantly cover the microphone myself. Thanks!

II am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?

I am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?

Three basic steps to get you started:
You set the tempo and Rhythm when creating your project:
Launch GarageBand and and select "New Project" from the panel: Pick a suitable template, for example "Song Writing":
Then, in the next panel that opens "New Project from Template" select a folder and a name to store the project and set the basic parameters: Song key, tempo, signature; for example for a song in C-major, 4/4, 100 beats per minute set it like this.
If you later want to speed up the song or slow it down, use the LED display at the bottom of the window. Click on the leftmost icon to change it to show the metronom for "Project View" like this. Then you can change the basic settings:
Regards
Léonie
P.S. The GarageBand Help - accessible from the main menu bar "Help > GarageBand Help" or ⌘? is quite good and should get you started easily.

How do you get sound to work on 1st generation

please help , how do you get sound on a first generation ipod touch. No sound is coming out ( I tried headphones but still no sound).

The 1st gen iPod Touch does not have an internal speaker so you will only get sound through earphones.
You could try another pair of earphones, check the volume settings, restart/reset the iPod, etc.

Have a 2 year old ipad2 and while speakers work fine I can no longer get sound through headphones, how can I get sound through the headphones?

I have a two year old ipad2 and while the speakers work ok I can no longer get any sound through the headphones? If any one has any suggestions on how I can get sound to come out of the headphones I would be grateful.

System Preferences --> Sound --> uncheck the mute button next to the Output volume (assuming it is set). Or move the Output volume slider.

How do i get sound to my mixing board?

Similar Messages

Maybe you are looking for