How do I get the newest e-mail at the top of the list?

My newest email comes at the bottom of the list. I want it to appear at the top. How?

Click on the column header labeled Date.
Clicking any header makes that the sort column. Clicking the same header a second time reverses the sort.

Similar Messages

  • When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
    That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

  • TS4185 I have a I Mac in my office & a mac lap top at home. Now I have the same e-mail address. I want the Facetime for my mac at home. 10.5.8 how can I get it?

    I have a I Mac in my office & a mac lap top at home. Now I have the same e-mail address. I want the Facetime for my mac at home. 10.5.8 how can I get it?

    Addition to above...
    I need this on iCloud. anyone know where to find it?

  • When I try to reply to an e-mail, Iget the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?

    When I try to reply to an e-mail, I get the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?

    Try this. Sometimes this is all that you need to do to fix that issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Where did RRS Feeds go and how do I get them back in Mail 6.0?

    Just upgraded to OS X Mountain Lion and have seemed to have lost the capability to receive RRS feeds in mail.  Where did RRS Feeds go and how do I get them back in Mail 6.0?

    Apple has dropped RSS Feeds from Safari and Mail.
    As fas as I know the only way to get them back is a third party app.
    I have found Vienna RSS to work even better then the old way with Safari and Mail.
    Allan

  • HT1277 How do I get to my e-mail Server?

    How do I get to my e-mail server?

    Hello,
    Who is your eMail provider, the part after the @ sign?

  • HT1349 how do i get my verified e mail for i cloud

    how do i get my verified e mail for my i cloud account tryed getting it re sent but with no luck its driving me mad please help

    Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
    You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    You can find more information about the zoom features Firefox offers in these articles:
    [[Text zoom]] - For zooming text only
    [[Page zoom]] - For zooming the whole page (including images etc.)

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

  • HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure  if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

  • How do you get iTunes purchased songs to automatically play one after the other

    How do you get iTunes purchased songs to play automatically one after the other without having to hit play for each song ? Also I lost all my pictures on my iPad when I installed iOS 7 upgrade. Any way to get them back? Thanks. Dr Ron.

    Hi Dr. Ron,
    By your question, I am wondering if you are playing your music from the iTunes app rather than the Music app?
    In the Music App, you can go to any of the options at the bottom and click on a song to play and it will then continue to play the songs in that category. You can also select "Shuffle" to shuffle them.
    As for your Photos, did you have them backed up anywhere?
    Cheers,
    GB

  • How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

    ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

    Hello,
    I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
    I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
    I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
    There are instructions on resetting your phone here:
    http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
    I hope that helps.

  • HT1311 i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on th

    i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on the phone

    What is the precise wording of the error message that occurs on the old iPhone when attempting to do a backup?
    Are you attempting to backup via iTunes on the computer or iCloud?

  • How do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    how do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    Hi..
    Thanks for the reply..
    My original I Phone 5 was running IOS 6.12
    My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
    Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
    I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
    So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
    I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
    but it doesn't help me..
    Steve

  • How do I get a "transfer images" button to show up in the solution center?

    How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
    Scan buttons are displayed and work, as does print.

    What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
    This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

  • HT204053 I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have a Phone support for this area)

    I accidentally bought an 15GB iCloud service, and I want a refund of my money. How can I get my money back? I can't find the email adress to ask for it (I live in Chile. Apple doesnt have Phone support for this area)
    Please, help me :)

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

  • My MacBook Air won't stay off. I turn it off and it will wait anywhere from a few seconds to a few hours and turn itself back on. You can see how that can get annoying and I can't seem to solve the problem.

    I turn it off and it will wait anywhere from a few seconds to a few hours and turn itself back on. You can see how that can get annoying and I can't seem to solve the problem.

    There's a slight chance this might help:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Otherwise it needs to be repaired.

Maybe you are looking for

  • Query on BIW........................Urgent

    Hi Friends,   Here is my query on BIW.     User getting the error as "Compile error in Hidden Module:cBEXconfac" while executing the query. Plz help me on this if someone face the same prob. Thanks a lot in advance.   mrutyun^

  • Need clarification on "reader enabled" in LC ES

    Is "reader enabled" some plug-in or just an option to "mark" before I start developing new form? Cant find much about it in LC help but I see its very important for later user-end capabilities (like sending filled pdf by e-mail using only adobe reade

  • Need CR Developer 12.0 Product Code

    Hi, I have reinstalled Windows XP and do not have the 26 digit Product Code for the CR2008LPs.exe (Crystal Reports: Developer 12.0) that I am attempting to install. I have registered Crystal Reports: Developer 12.0 and received this email on 18 Augus

  • New to Motor Control, Seeking best approach

    Hi...  I have an upcoming task where we want to have a LabVIEW based motor control applied to a round, rotatable table inside a coating chamber.  The table will be on the order of 20 inches in diameter, made of aluminum and I will guess that it might

  • Problem mit den Ps Cs6 Texteffekten

    Hallöchen ihr Lieben Ich habe seit gestern Abend ein Problem mit Cs6. Ich habe ein Wort auf ein Foto gesetzt und dem ganzen u.a. den Effekt Kontur und Abgeflachte Kante und Relief gegeben. Wenn ich nun alle meine Ebenen zusammenpacken möchte (sichtba