How do i go to the port scan in yosemite 10.10?

I need to go to the port scan because of my email settings and i just can't, i have done everything and i can't do it, pls help me
thx

http://osxdaily.com/2014/05/20/port-scanner-mac-network-utility/

Similar Messages

  • How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

    How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

    The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
    So I'm not really sure what your question is.

  • How do I set the port number on my Ipad

    I need to find out how to set the port number on my IPad to use Telus Email which will receive but not send

    You will not be able to send any mail until you tell it the outgoing mail server.
    How did you learn about the port number?  If you google your isp and the words mail settings, you will likely find a page with all of the needed settings, including the outgoing server name, and a confimation of the port needed.
    Once you know those two answers, go to the setting screen, and touch the outgoing server field, and you will be able to enter the name.  Spell it right. Then touch the advance tab, then, the port number, and enter the proper port number.
    If you get those entries right, you should be all set. 

  • Issues with McAfee IPS and HP PhotoSmart Premium C309g-m performing port scan

    Trying to run a HP PhotoSmart Premium C309g-m printer wirelessly and connect to a laptop computer with Windows 7 32-bit operating system.  Printer is available for about 3 and a half minutes and then is blocked by McAfee because the printer is trying to perform a UDP port scan.  The IP address of the printer is blocked for 10 minutes and then becomes available again.  After about 3 and a half minutes, the printer IP address is again blocked by McAfee IPS for 10 minutes and the cycle repeats again.  Goes on all day.  Difficult to get any work done.  Anyone have a fix to stop the port scans?  Thanks

    Hello JWB46,
    Welcome to the HP Forums!
    I understand when you scan a document, it takes longer and the background is black with horizontal white lines or a greenish background. I will do my best to assist you! First, I need to find out your operating system on your computer? Windows or Mac?
    How is this printer connected? Wireless or USB?
    Please make sure you have followed this entire HP document on Color or Brightness Level of Scanned Image is Not Correct. I would like to test out the hardware within your printer. Try copying a blank document on the scanner glass. Let me know if you have the same results. I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • Port Scan to verify Port Forwarding

    I just followed some online instructions on doing a port forward for port 5003 (Filemaker) on my 3800 HGV - B 2wire Gateway Modem/Router (AT&T). However using no-ip.com It cannot find my computer.
    I have seen some discussion on doing a Port Scan on computer to verify which ports are forwarded.
    Can someone tell me how to do this?

    Hi
    Navigate to /Applications/Utilities. Find the Network Utility and launch it. Click on the Port Scan tab. Key in the IP address. Click Start.
    Tony

  • Outgoing port scan to find blocked (by ISP)/open ports

    Hi,
    How can I do a port scan (network ports, where web pages/applications use port number 80 for example)? I would like to find out if my ISP are blocking ports -- get some hard data/facts. I've tried using an online port scanner (one that operates from a web page/server) and according to it, all my ports are blocked -- but I now realise that's incoming (to me) where I didn't initialise the communication. So I suppose to find out what I want I need to initialise the communication -- outgoing (from me) communication. How can I do this? Any software / utilities available anywhere? I tried the "port scan" in Network Utility but this never reported anything. Maybe that will do what I want but I didn't have it set up properly possibly?
    Any suggestions / ideas much apprecaited.
    Cheers,
    John.

    Hi,
    I'm not sure what you're asking.
    What I'm asking about is in connection with the action that some ISP's take described as "traffic shaping". I know they are filtering/blocking because all P2P applications stop working for a period of time each day while email and web pages continue to work fine for example. I'm thinking of complaining to varous organisations because I have it in writing from the ISP they don't do this. They do, but I just want a bit more factual data first, before spending time and money making official complaints.
    ISP's rarely block outbound packets
    Well there's traffic shaping of some sort happening. I've found out that all incoming initialted outside packets are blocked but things still work fine so I assumed it must be outgoing which are being blocked.
    If you can't make an outbound connection, it's usually the return (ACK) packet that gets blocked.
    Right, I see. In that case another cooperating machine is needed to find out what I'm after I suppose.
    However, most firewalls have a rule that allows packets through that are part of existing connections. That allows you to browse the internet no matter what source port your browser uses.
    This isn't about a protection, it's about an ISP stopping/filtering certain uses (ports) via their connections because they don't like it -- too much band width use probably.
    By far the best packet sniffer is Wireshark (formally Ethereal) for display of the capture.
    From what's said above, a packet sniffer isn't going to be enough right? There needs to be two machines, me sending to another on various ports and it replying on the same port and both machines keeping a log of what's been sent and received, then a comparison made to see what made it and what didn't --- I guess. I wonder if there is such a service, piece of software, whatever, out there?
     Is your computer behind a router in your home? Of course that would include Airport. If so, that is more likely the culprit than your ISP.
    Yes an AirPort base station. Say "that is more likely the culprit than your ISP" again after visiting http://www.reviewcentre.com/review210703.html and searching the text for "traffic shaping" a few times! I'm pretty sure I've got the base station set up fine. And I think it's more likely my ISP (the one reviewed at that link) is the culpret. P2P software stops working, well it varies, but it reliably stops during "peak hours". It's the ISP for sure.
    I don't know any ISP that blocks all ports.
    Well, for incoming, according to the http://www.websecurity.mobi/network-security-audit/178-no-open-ports-my-machine- obviously-rediculous.html (which is me expressing surprise about all incoming ports being blocked) my ISP does. Apparently there is quite a difference between incoming and outgoing. Stops people using their machine as any kind of server (according to that link). One thing I do notice is that doing:
    sudo tcpdump -v -x -s 128
    on the command line while I'm not doing anything on the internet results in nothing -- complete silence as it were. On the dial up connection I've just left doing that command there was stuff coming in all the time -- who knows what, but the complete silence on my new broadband connection would back up the idea that all incoming ports are blocked. I could be wrong of course.
    "nmap" is probably the best portscanner available but as you discovered, OS X has one builtin that you can access through the Network Utility.
    Oh right I didn't know they were the same thing. I found that the port scan in NU didn't do anything. I left it for hours. There was an IP address which I left as it had filled it in itself. Maybe I should have changed that? How can I get the right address, or does it usually fill it in correctly itself?
    What actually does a port scanner like that one do? Send something out? To what? And how does it know if it got there?
    It seems to me to get what I need there needs to be first a suitable piece of software, second another computer running the software ready for my computer to talk to and to communicate multiple times and see what happens. My point is it's not just a piece of software that's needed it's also another cooperating computer elsewhere that needed? Otherwise what's the testing software going to talk to to see if the channel is working?
    I'll look into the Port Scan in NU again, see if I can get some actual results from it this time. On a broadband connection I left it for about, I don't know, 3 hours maybe, got nothing.
    Cheers,
    John

  • How to find out on wich port BI Publisher is running?

    Hello,
    I have the following situation: Windows XP, Oracle Database 10.2.0.3, APEX 3.0, Application Server 10.1.3.1 (Advanced, J2EE-Server and Web-Server) and Oracle BI Publisher 10.1.3.2.1 (Advanced, Setup-Type Oracle Business Intelligence Publisher).
    The HTTP-Server and BI Publisher are running.
    Now I want to configure APEX for PDF-printing. How I can find out the port on wich BI Publisher is running?
    I need it for the attribut "Print Server Port" in APEX Instance settings.
    Thanks and regards,
    Susanne

    Hi Susanne,
    I think the default port for BI Publisher is 9704
    There are a couple of things you can do to find the port that BI Publisher is running on. The easiest is to navigate Start -> All Programs -> Oracle - BIPHome1 -> BI Publisher Server.
    This will bring up the homepage for BI Publisher in a web browser. The url for this page will contain the port for BI Publisher: http://localhost:9704/xmlpserver.
    The other way is to open a dos prompt and type netstat -abThis will show you all ports and the applications running on them. BI Publisher will be one of the ones with java.exe running.
    I hope this helps.
    Regards,
    Cj

  • Is this port scanning?

    Hello all,
    I’m a new Oracle Administrator and I want to ask the following question:
    I have one 10g R2 Database Server (myhost.mydomain) running a DB with SID=DB1 on a Linux Redhat Server.
    There is another 10g R2 Database on a Win2003 server (HOST1) which through a database link is doing specific select on two tables only (I am not responsible for this server).
    Looking the listener.log of my server I saw that every 10 – 20 seconds there are connections on my server and on different ports. Is this something like port scanning?
    A 10 minute sample of my listener.log:
    30-OCT-2010 08:59:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3452)) * establish * DB1 * 0
    30-OCT-2010 08:59:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3454)) * establish * DB1 * 0
    30-OCT-2010 08:59:34 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3457)) * establish * DB1 * 0
    30-OCT-2010 09:00:01 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3465)) * establish * DB1 * 0
    30-OCT-2010 09:00:10 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3469)) * establish * DB1 * 0
    30-OCT-2010 09:00:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3472)) * establish * DB1 * 0
    30-OCT-2010 09:00:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3474)) * establish * DB1 * 0
    30-OCT-2010 09:00:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3483)) * establish * DB1 * 0
    30-OCT-2010 09:01:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3484)) * establish * DB1 * 0
    30-OCT-2010 09:01:09 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3487)) * establish * DB1 * 0
    30-OCT-2010 09:01:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3488)) * establish * DB1 * 0
    30-OCT-2010 09:01:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3494)) * establish * DB1 * 0
    30-OCT-2010 09:02:10 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3505)) * establish * DB1 * 0
    30-OCT-2010 09:02:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3506)) * establish * DB1 * 0
    30-OCT-2010 09:02:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3511)) * establish * DB1 * 0
    30-OCT-2010 09:02:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3519)) * establish * DB1 * 0
    30-OCT-2010 09:03:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3520)) * establish * DB1 * 0
    30-OCT-2010 09:03:09 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3523)) * establish * DB1 * 0
    30-OCT-2010 09:03:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3524)) * establish * DB1 * 0
    30-OCT-2010 09:03:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3528)) * establish * DB1 * 0
    30-OCT-2010 09:03:58 * ping * 0
    30-OCT-2010 09:03:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=myhost.mydomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=myhost.mydomain)(PORT=1521)))(VERSION=169870336)) * status * 0
    30-OCT-2010 09:04:09 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=52637)) * establish * DB1 * 0
    30-OCT-2010 09:04:10 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3537)) * establish * DB1 * 0
    30-OCT-2010 09:04:13 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=52639)) * establish * DB1 * 0
    30-OCT-2010 09:04:13 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=52640)) * establish * DB1 * 0
    30-OCT-2010 09:04:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3538)) * establish * DB1 * 0
    30-OCT-2010 09:04:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3542)) * establish * DB1 * 0
    30-OCT-2010 09:04:34 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3544)) * establish * DB1 * 0
    30-OCT-2010 09:04:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3553)) * establish * DB1 * 0
    30-OCT-2010 09:05:01 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3554)) * establish * DB1 * 0
    30-OCT-2010 09:05:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3555)) * establish * DB1 * 0
    30-OCT-2010 09:05:09 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3559)) * establish * DB1 * 0
    30-OCT-2010 09:05:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3560)) * establish * DB1 * 0
    30-OCT-2010 09:05:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3564)) * establish * DB1 * 0
    30-OCT-2010 09:06:10 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3573)) * establish * DB1 * 0
    30-OCT-2010 09:06:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3574)) * establish * DB1 * 0
    30-OCT-2010 09:06:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3578)) * establish * DB1 * 0
    30-OCT-2010 09:06:40 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=52652)) * establish * DB1 * 0
    30-OCT-2010 09:06:40 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=52653)) * establish * DB1 * 0
    30-OCT-2010 09:06:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3586)) * establish * DB1 * 0
    30-OCT-2010 09:07:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3587)) * establish * DB1 * 0
    30-OCT-2010 09:07:09 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3590)) * establish * DB1 * 0
    30-OCT-2010 09:07:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3591)) * establish * DB1 * 0
    30-OCT-2010 09:07:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3593)) * establish * DB1 * 0
    30-OCT-2010 09:08:10 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3604)) * establish * DB1 * 0
    30-OCT-2010 09:08:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3605)) * establish * DB1 * 0
    30-OCT-2010 09:08:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3607)) * establish * DB1 * 0
    30-OCT-2010 09:08:58 * ping * 0
    30-OCT-2010 09:08:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=myhost.mydomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=myhost.mydomain)(PORT=1521)))(VERSION=169870336)) * status * 0
    30-OCT-2010 09:08:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3617)) * establish * DB1 * 0
    30-OCT-2010 09:09:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3620)) * establish * DB1 * 0
    30-OCT-2010 09:09:09 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3623)) * establish * DB1 * 0
    30-OCT-2010 09:09:09 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=42950)) * establish * DB1 * 0
    30-OCT-2010 09:09:13 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=42951)) * establish * DB1 * 0
    30-OCT-2010 09:09:13 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=42952)) * establish * DB1 * 0
    30-OCT-2010 09:09:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3624)) * establish * DB1 * 0
    30-OCT-2010 09:09:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3626)) * establish * DB1 * 0
    30-OCT-2010 09:09:34 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3630)) * establish * DB1 * 0
    30-OCT-2010 09:10:01 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3637)) * establish * DB1 * 0
    30-OCT-2010 09:10:07 * (CONNECT_DATA=(SID=DB1)(CID=(PROGRAM=perl)(HOST=myhost.mydomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.9)(PORT=42957)) * establish * DB1 * 0
    30-OCT-2010 09:10:10 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3643)) * establish * DB1 * 0
    30-OCT-2010 09:10:15 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3644)) * establish * DB1 * 0
    30-OCT-2010 09:10:26 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3646)) * establish * DB1 * 0
    30-OCT-2010 09:10:59 * (CONNECT_DATA=(SERVER=DEDICATED)(SID=DB1)(CID=(PROGRAM=d:\oracle\product\10.2.0\db\bin\ORACLE.EXE)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.10)(PORT=3658)) * establish * DB1 * 0

    Is this port scanning?No. Port scanning is sending various crafted tcp packets to a range of ports to determine what, if any, service is using that port as a listening end-point. It is not about sending lots of packets to a single port.
    So if someone port scans your Oracle server, there is an excellent likelihood that you will not even see that. A stealth scan is commonly used - and this will be dealt with at IP stack level and not at the listener level. So the listener will never see the port scan. It will not be recorded in the listener's log.
    What you are seeing are standard client server connections. The server port is 1521. The client port will be a brand new port each time - and a port number from the private/dynamic port range.
    A lot of client-server connections to a server that for example fails, can be a sign of a DoS (<i>Denial of Service</i>) attack. But yours simply seems to be the local Oracle instance checking in with the listener at regular intervals.
    The executable according to the connection string received from the client is <i>d:\oracle\product\10.2.0\db\bin\ORACLE.EXE</i>. This means an Oracle server process. An Oracle instance will continually contact the local listener to inform it of the services that it supports.

  • I'm getting a port scanning attack from my iPad?

    A while ago, my dad got me an iPad 2, however, he went on vacation shortly after and used it on his vacation.
    I'm not sure if it was also happening before he went on vacation, however, ever since I got it back, I am getting popup notifications from my firewall (ESET Smart Security 5 Firewall) that there is a port scanning attack coming from 192.168.1.7.
    I logged in to my router via 192.168.1.1, and on my connections list it shows my iPad being 192.168.1.7.
    What the heck is going on? Is this a bad setting from my iPad, or is it possible (somehow, I don't know) that there is some sort of virus/bug with my iPad?
    I switched my ESET firewall to interactive mode and tried to connect a few times, and set some exceptions for iTunes connectivity, etc, but when I go back, the port scanning message keeps coming up. It is not constant, however it is in random time frames. Sometimes it'll happen once every 10 minutes, others once every 30.
    What can I do? Should I try resetting everything to default on my iPad? Is this just a random thing that happens because my firewall is detecting a false positive?
    Please help!
    Thanks,
    Kolgera

    It's very possible that either data is being transfered through your router or iPad2 in a non-standard way or some ping requests between the devices has perhaps caused the notification to display. The following ESET Knowledgebase Article should help: http://kb.eset.com/esetkb/SOLN295
    If this doesn't help or you're unable to reach the page, you can put in a support case request with ESET Customer Care by going to http://go.eset.com/us/support/contact

  • Port scan not run

    Hello:
    The port scan option in the net utility of my MacBook Air with Yosemite don't run.
    And in iMac neither!!!!!
    Un saludo.

    Why do you have following command on the PIX?
    crypto map outside_map 40 set transform-set 165.228.x.x
    Also you have this transform set on the PIX:
    crypto ipsec transform-set 10.112.60.0 esp-aes-256 esp-sha-hmac
    This does not match the transfor set on the router:
    crypto ipsec transform-set tritest esp-3des esp-md5-hmac
    Where are you using the access-list/route-map
    101 ?

  • Dynamically determining the port number of a deployed application

              Hi
              How do I dynamically determine the port number of a deployed web application ?
              I know HttpRequest.RequestURL() returns us the entire URL but I wanted to just
              know the port number .
              Is there any API do that ??
              Thanks
              Kar
              

    kar piyush wrote:
              > Hi
              >
              > How do I dynamically determine the port number of a deployed web application ?
              > I know HttpRequest.RequestURL() returns us the entire URL but I wanted to just
              > know the port number .
              >
              > Is there any API do that ??
              >
              kar,
              Here's what I do under WL 7 SP2:
              import javax.management.AttributeNotFoundException;
              import javax.management.DynamicMBean;
              import javax.management.MBeanException;
              import javax.management.ReflectionException;
              import javax.naming.Context;
              import javax.naming.NamingException;
              import weblogic.jndi.Environment;
              import weblogic.management.MBeanHome;
              String domainName,
              serverName,
              serverPort,
              serverUrl;
              // Getting the initial context
              Environment env = new Environment();
              try
              Context ctx = env.getInitialContext();
              if (ctx == null)
              // unable to retrieve a JNDI context
              return;
              // Retrieving the server-specific MBeanHome interface
              MBeanHome home =
              (MBeanHome) ctx.lookup(MBeanHome.LOCAL_JNDI_NAME);
              if (home == null)
              // unable to retrieve the local server MBean
              return;
              // Get the domain & server name
              domainName = home.getDomainName();
              serverName = home.getMBeanServer().getServerName();
              // The server port and address are a little trickier to extract...
              Object mbeanArray[] =
              home.getMBeansByType("ServerConfig").toArray();
              DynamicMBean mbean = (DynamicMBean) mbeanArray[0];
              try
              serverPort =
              Integer.parseInt(
              mbean.getAttribute("ListenPort").toString());
              serverUrl =
              mbean.getAttribute("ListenAddress").toString();
              catch (AttributeNotFoundException thrown)
              // caught a AttributeNotFoundException
              catch (MBeanException thrown)
              // caught a MBeanException
              catch (NullPointerException thrown)
              // caught a NullPointerException
              catch (ReflectionException thrown)
              // caught a ReflectionException
              catch (NamingException thrown)
              log.debug("caught a NamingException", thrown);
              

  • Symantec and port scan attacks

    I have found many post on the port scan attacks created by Symantec on client computers, however it seems my port scan attacks are being blocked on the Spiceworks server side.  All the clients are showing up in spiceworks with no scan errors, but when logged onto Spiceworks server there is a port scan attack every few minutes from the clients.
    This topic first appeared in the Spiceworks Community

    No. While the encryption of your wireless network is mandatory to protect other people in your proximity to access your network, computers, internet connection or eavesdrop your computers it has nothing to do with port scan attacks. Port scan attacks originate from the internet. The router will block those unless you have configured port forwardings on your router or a computer opened ports on the router through UPnP. This is because your router does NAT which makes the LAN unaccessible from the internet.
    Port scans are not really attacks but just the general "noise" in the internet. There is nothing you can do about it except not using the internet. As long as you don't have open ports there is nothing to worry about. And even if you have opened a port for instance for gaming it still depends on whether the program listening on that port is vulnerable or not.

  • Catching Port Scanners, or preventing port scans

    Does anyone know of way to catch a person who is "port scanning" or "port sweeping" me?
    I have Norton AntiVirus, and it blocks the port scans, and gives me the ip address, but I can't seem to find a way to link this to anyone...
    Any suggestions?

    It enrages me and I want to find them...and hack them, with something other than a computer...
    Move on.
    For on, you're not going to stop it. It's a fact of life online and there are far more systems out there doing it than you have time to track (unless you're really, really bored).
    Secondly, even if the addresses aren't spoofed you'll find one of two situations in 99.9% of all scans:
    Either the source is in some remote country like Romania or China who doesn't give two hoots about your IP, or the source is some poor schmuck whose Windows machine has been hacked and he's part of a botnet or other setup where the real culprit is far removed.
    In the former case you're wasting your time. In the latter you're targeting the wrong person and you have no chance of finding the real source.
    So consider it noise and live with it. Your life will be much happier.

  • WRVS4400N Drops Internet Connectivity with PORT SCAN

    I just installed a WRVS440N router and it appears that every time a PORT SCAN happens, the router just shuts down and drops Internet Connectivity for about a minute or two, then once the PORT SCAN is done everything seems back to nomal?
    I have heard many complaints about this router and wonder does anyone else have this issue?
    I also have very erratic Internet connections speeds and I turened off the IPS feature and that seems to help. I am running version 2.0.8 Firmware.
    If anybody has any tips or tricks to improve this router would like to hear. I can only say I regret buying this thing.

    I suggest you to play around with the wireless settings on the router, Like changing the wireless name , channel and the type of wireless security.
    This link will guide you;http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698 
    Also, you check the firmware of the router by going to the status tab on  the interface.
    Website you can check to download it.
    http://homesupport.cisco.com/en-us/support/routers/WRT110

  • How to change Firewall remoted desktop port?

    How to change Firewall remoted desktop port
    I have changed the listening port in the registry.
    I added a rule for incoming for RDT.
    I can find the rules, and other items in the Firewall lists.
    But I cannot find how to edit to change the port number.
    Other threads indicate just added an open port not designating RDT as the program.
    Guidance please.

    >So, when inserting a new rule and choosing RDT from the program list automatically inserts the default port number? 
    My fault.  You should not select RDT from the program list, but instead
    select the radio button for port, then click next, select TCP, and add in
    the port number, then next and continue on with setting allow connection
    and then when does this rule apply.
    Bob Comer

Maybe you are looking for