How do I increase the size of the font in the different panels?

I am using Adobe Bridge and PS CS6 on a PC. Just upgraded monitor from 19" square to 24" wide. The font in my Adobe poducts is now very small. I can adjust tool bars and other windows areas, but not but not the Adobe panels, etc. I have searched in Help with no success. Help please.

Add code to userChrome.css below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
*ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#nav-bar toolbarbutton > .toolbarbutton-icon,
#personal-bookmarks .bookmark-item > .toolbarbutton-icon {
height: 32px !important;
width: 32px !important;
</nowiki></pre>

Similar Messages

How do I increase the size of a font from the internet when printing?

When printing from a webpage, the printing is so very tiny. If I increase the font under internet options it helps, but increases the font so large on the website that it doesn't fit on the viewed page. Help! I read a lot of the questions about this, but no answers!

Adjust the print scale: File > Page Setup > "Format & Options": Scale (unselect: "Shrink to fit page width")
* http://kb.mozillazine.org/Problems_printing_web_pages

How to increase the size of Photoshop Elements 8 MENU and PANEL fonts?

How do I increase the size of Adobe Photoshop Elements 8 MENU, PANEL and other fonts used in Photoshop Editor?
Does anyone know of registry fix or other solution?
Thanks
FYI:
I've increased windows XP display fonts to 140 dpi, only Photoshop Elements 8 fonts did NOT increase, such as menu, panel and drop down fonts -- they remain very small and almost unreadable. All other programs menu fonts did increase.

I’m sure Adobe try to make their products as accessible as possible to all sections of the community although by its very nature certain adjustments to fine detail require the use of a mouse.
However where possible keyboard short cuts are provided, as an alternative to the drop down menus. For example to adjust levels rather than clicking Enhancements>>Lighting>>Levels you can simply press Ctr+L.
Importantly it’s possible to zoom in and out on any image in the Editor using Ctr plus or Ctr minus.
That's the only suggestion I can think of.

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How to set the size of JTextPane according to the size of text??

hello
how can i set the size of JTextPane according to the size of text it would contain in such a way that JTextPane should not have ScrollBar.

StanislavL wrote:
width should be defined for your container width. suppose you have a very long row of text. Widht full screen widht it wraps into 2 lines but if you set widht of your window to half screen widht there should be 4 lines.
But you can use the same code and get preferred widht as well.u mean like this :
objTextPane.getParent().getWidth();Edited by: 811243 on Sep 6, 2011 5:32 AM

How to adjust the size of image to suit the size of panel?

i have got a panel which contains a image.but i don't want to use scroll panel if the image's size is bigger than the panel.
what can i do to change the size of image to suit the size of the panel every time i want to display it?
thanks

Reply 3 of this thread should be able to help you:
http://forum.java.sun.com/thread.jsp?forum=31&thread=286424

I use iwires to connect macbook to lg tv to watch netflix.How do I increase screen size on tv.I have tried display options on settings- not working

I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working

I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I deleted the font section but everything in Photoshop CS5 works. How can I fixed this because I use fonts all the time? I don't want to purchase another one since this cost me $699:(

I purchased PhotoshopCS5 Sept 2010 and still use the same MAC. I invertly deleted the font section but everything else works. How can I fixed this because I use fonts all the time? I don't want to purchase another one since this cost me $699:(

Which version of mac os x are you using?
Could you clarify what you mean by "I invertly deleted the font section"

How do I increase stack size beyond 65532 with help of ulimit command

How do I increase stack size beyond 65532 with help of ulimit command

Are you already using "64-bit Kernel and extensions" as noted in this pane?

Dr. Damien's Development - The Xylophone Project X - Font Issues and Front Panel Layout

The Show Raw Data button was made active in this installment. Doing this in a robust fashion was more involved than one might think, due to font and platform issues (remember I want to port this to a Windows Mobile device eventually). The following changes were made.
The A frequency indicator was made active. This was an oversight from the last update.
A front panel object, XylophoneFP.lvclass, was created to hold the front panel references and methods.
The front panel object was used to implement the Show Raw Data button.
The front panel object was used to compensate for font issues.
When testing this application on Windows Vista, I noticed that the font differences between Vista and XP were annoying enough that I wanted to fix them. This will also lay the groundwork for any layout issues when porting to Windows Mobile. Usually, I create a cluster containing all my front panel references, but this time I put them into an object. Besides the usual object boilerplate, there are two methods, one to rearrange the front panel and one to show/hide the data graphs.
Once the controls and indicators are properly arranged, showing and hiding the data graphs is simple. VI server methods are used to find the edges of the outer controls, some whitespace is added, then the front panel size is reset. Arranging the controls in the first place is much more complex. Dialog controls are used, and these controls change size based on the default font size. Font sizes can change due to user preference or when using the application in a different operating system than it was developed in. Button sizes can also change due to localization.
This problem is difficult to solve cleanly, and the VI which does this, XylFP.lvlib:XylophoneFP.lvclass:ArrangeControls.vi, shows the problem. It relies on the actual sizes of the controls/indicators to rearrange the front panel in a hopefully pleasing fashion. Even though this is a relatively simple UI, the VI is fairly complex. It uses VI server calls to determine the current sizes of controls and then rearrange them. If you choose to do something similar, consider the following hints:
The Bounds property of all controls is not writable. To change the size of controls, you need to find the property or properties which change the size. There may be more than one (which is why Bounds is not writable). For example, to change the size of a boolean, use the Button Size property.
In many cases, the property you use to change the size of the control will not be the same value as the Bounds property. Using the boolean again, the Bounds of a 3D LED include the 3D effect around the LED, but the Button Size only includes the LED itself. Comparing the Bounds property to the result of a query to the property you will be setting will give you the necessary offset to convert between the two.
Make sure you label your wires if you attempt to do things like this. Long wires are very common in this type of programming. It is difficult enough to keep track of things without the added aggravation of having the trace wires back to their source to identify them.
A few judiciously placed type converters can eliminate many type conversion dots. This is not usually a real problem in this context, but you should get into the habit of efficient programming.
I will be hiking through the mountains of New Mexico with the Boy Scouts for the next couple of weeks, so do not be dismayed if I do not reply to comments very quickly. However, comments and suggestions are still welcome and encouraged. I will reply when I return.
Previous Installments
Data Acquisition Concept
GUI Concepts
Specifications
Core Architecture
Data Acquisition and Note Analysis
Sound Acquisition Revisited
Sound Analysis
Configuration Dialog
Calibration Dialog
Message Edited by DFGray on 06-05-2009 03:09 PM
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
XylophoneX.zip ‏1259 KB

DFGray wrote:
I put the event structure in the command loop so that events are processed synchronously. In the past, I have run into a variety of race condition/synchronization issues when separating the event and command loops and prefer to keep them together to make the program structure simpler.
It is simpler but you give up any multi CPU performance. That LV is inherently parallel is one (the only) real advantage over a text based development system. I can write good structured text that is almost as visually easy to parse as LV. With modern syntax coloring engines, the difference in icons vs. structured text is not that great.
But the challenge I give the traditional text coders is to keep track of many mulitple threads. This is why dataflow is a powerful concept. Yes it does lead to asynchronous execution but if you impose synchronicity on your code you are working against LV. I get most first time programs where everything is in a sequence structure. "Just to be safe".
Of course this is much better but my first design goal is that any application should take advantage of a much hardware as possible, degrade gracefully on slower hardware and play nice with other running applications. This simpler structure severely handicaps that first goal.
In this case it is simple enough to "get away" with it since as you point out that there should not be anything that takes significant CPU time. But that may not be true on the PDA?
If you are going to run it on the PDA will we be discussing techniques to seamlessly use both NIDAQmx Base and NIDAQmx in the same system? That is a real challenge. I look forward to more of this!
Cheers!

HT2523 Is there a way to increase the size of textedit text on the screen without increasing the font size? (as can be done in WORD for MAC)

In Microsoft Office for Mac WORD I can make text appear larger on the monitor screen without increasing the font size for printing purposes. I have not been able to figure out if/how this can be done in TextEdit. In TextEdit, if I set the font size to between 10 and 12, the text appears very small on the screen. But if I increase the font size, the font size will be way too large when I print such a document.

Thank you very much for your prompt reply and suggestion.
Actually after I posted my question, I saw link to Text Edit viewable font, which pointed out the small up and down arrows in the lower right corner of the Text Edit screen.
However, it is also good to keep in mind the Universal Access options.

How to find out the size of files transferred over the SQL * Net?

I am trying to test the Advanced Compress (AC) for 11g Data Guard. When the AC is turned on, the archived log files are supposed to be compressed on the primary database server and sent over SQL*Net, then decompressed on the standby db server. We will see the file sizes are the same on both primary and standby servers. I want to verify that the AC works by monitoring how much data are sent over SQL*Net. Per Oracle, AC uses 35% less of the bandwith. That means the size of the files transferred should be at least 65% of the original size.
Is there a way to find out the size through Oracle utilities? If not, how to find out by OS utilities? OS is Solaris 5.10.
Thanks.

I'm not sure this can be done via SQL*Net, but a network packet sniffer between the two servers should be able to help - you might want to contact your network team.
HTH
Srini

How to set the size of a Font in Pixel?

Hi,
i know how to get the screen resolution of the current monitor and I know how to use Fonts (and I know how to read the API, but that didnt help).
Is there a way to set the size (or at least the height) of a Font in pixel rather then in points?
All I actually need is how many pixels the height of my String will be when I print it on the screen.
I use Swing and drawString(...) to draw my String (this information shouldnt matter, but just in case).
thanx

Hi,
search doc about FontMetrics, you'll find infos about how to get the font height... If I remember well, you need to get the Graphics of the component, then call getFontMetrics() or getFontMetrics(font) to obtain the metrics, then call getHeight() to know the font height...

How to set the size of a JTabbedane to the size of the frame

I have a tabbed pane in a frame, I would like to know how to set the size of the tabbed pane, so that it occupies the whole of the frame which has been set to screen size.
Thanks

Is it not possible to use it with a GridBagLayout?Your question was "How do I get a tabbed pane to take all the space of the frame"?
You where given the answer. Did you try it? Did it work? Then why are you questioning the suggestion?
Its one line of code if you use a BorderLayout which by the way was specifically designed for this purpose.
Yes you can do it with a GridBagLayout with about 5 lines of code.
So the question is why would you want to write 5 lines of code when you can use one?
If your question was "How do I waste my time forcing the GridBagLayout to size a component to take up all the space of the frame", then you would have received a different answer. (Although most people would have told you to use a BorderLayout anyway, since its easier).

How to set the size of a control with the mouse ?

hi all,
i am writing a sort of ide (editor which creates applets very easy....) - for this purpose i need some hints from you guys:
of course i need to create some controls like buttons...
no prob - i am able to create buttons and place them at any place.
BUT WHAT ABOUT THE SIZE ?
ok, i have some ideas to realize this but what i want is a thick border arround the control with spots at each corner - when i place the cursor at one of these spots, my mouse cursor should change and it must be able to change the size of the control (while pressing and moving the mouse - you all know that from any ide).
so how to do that?
go on brains!!!
THANX,
andi

I thought about creating dynamically resizable components, but gave it up as the effort seems too much for the benefit. I did a search for info on it and found a lot of people who wanted to do it, but not any who had actually done it completely. Here's some of my thoughts on the subject. You are right on about creating 'sizing handles', it seems to me the way to do this is to create your own container for any component (extend JPanel?) which can switch between no border and your new sizing border at some event. You will need to respond to mouse clicks on this border and follow the 'drag' event to find out where it was dropped. The java drag/drop events probably won't be of any use to you because each component will need an event handler. You need to catch them all.
Finally, you need to figure out how to interact with some LayoutManager or write your own. Most LayoutManagers want to do their own resizing and you will have to deal with this. For example, GridBagLayout will not only resize all of the other components on the affected row and column, but unless you resize the other components, you won't be able to drag the top higher or the left lefter?

How do I increase the size of the font in the different panels?

Similar Messages

Maybe you are looking for