How to set the size of a JTabbedane to the size of the frame

I have a tabbed pane in a frame, I would like to know how to set the size of the tabbed pane, so that it occupies the whole of the frame which has been set to screen size.
Thanks

Is it not possible to use it with a GridBagLayout?Your question was "How do I get a tabbed pane to take all the space of the frame"?
You where given the answer. Did you try it? Did it work? Then why are you questioning the suggestion?
Its one line of code if you use a BorderLayout which by the way was specifically designed for this purpose.
Yes you can do it with a GridBagLayout with about 5 lines of code.
So the question is why would you want to write 5 lines of code when you can use one?
If your question was "How do I waste my time forcing the GridBagLayout to size a component to take up all the space of the frame", then you would have received a different answer. (Although most people would have told you to use a BorderLayout anyway, since its easier).

Similar Messages

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • How to set border lines in table and also in template in the smartforms ?

    How to set border lines in table and also in template in the smartforms ?
    As I have to create table with following detals
    total row = 3
    row1 = 3 column
    row2 = 6 column
    row3 = 9 column
    for 2nd and 3rd row data to be fetched using coding.
    so can anybody explain me what should i use
    Table or Template ?
    and I want the border like excel format.
    Can anybody suggest me ?
    Thanks
    naresh

    if the data is multiple i.e. line items choose table.
    if the data is single i.e. fixed choose template.
    Create table
    >  Draw u r no lines
    > choose option select pattern
    > select display framed patterns
    Choose u r required one.
    out lined, or full lined. u can choose option.
    same procedure to be followed for template also.
    with regards,
    Kiran.G

  • How to set different icons for different windows which is seen in the top left corner?

    Hi
    How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
    Is there any way to set icon by calling any dlls.
    Thanks & Regards
    Samuel J
    [email protected]

    Hi Sam,
    no problem. See the attachment.
    Mike
    Attachments:
    TestIcon_LV85.zip ‏44 KB

  • How to set my windows to open at their default size every time.

    Ok, when I connect to my computer with splash top from my ipad my windows resize.  Is there a way to set my windows to just open at default size no matter what.  So every time I open a program the window is at default factory settings size.
    Thank you,
    Byggy687

    > How can I create a username and password pop up window?
    Use DW's OpenBrowser Window behavior.
    > Is that database related?
    The pop up window is not, but the processing of the login is
    likely to be.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Inokat" <[email protected]> wrote in
    message
    news:efd2l7$nns$[email protected]..
    > :), Man there are some excited people out there.
    > I got the picture after the first answer. Thanks David.
    >
    > I have another Q.
    > How can I create a username and password pop up window?
    Is that database
    > related?
    >
    > By the way, for those excited people out there, ?CHILL?
    >
    >
    >

  • I can not reveal how to set that when I open my Mozilla to appear on the home page, just bookmarks in pictures...

    like this one:
    http://www.google.hr/imgres?imgurl=http://sistemac.carnet.hr/system/files/opera.png&imgrefurl=http://sistemac.carnet.hr/node/147&usg=__Cw6wRHOdgK0llehsTsrdcz8jBLk=&h=689&w=815&sz=91&hl=hr&start=0&zoom=1&tbnid=5SfIkfvCCmDdFM:&tbnh=123&tbnw=145&prev=/images%3Fq%3Dopera%26um%3D1%26hl%3Dhr%26client%3Dfirefox-a%26sa%3DN%26rls%3Dorg.mozilla:en-US:official%26biw%3D1024%26bih%3D581%26tbs%3Disch:10%2C114&um=1&itbs=1&iact=hc&vpx=627&vpy=134&dur=1462&hovh=206&hovw=244&tx=140&ty=104&ei=718FTeKqI8vwsgaL6oHfCQ&oei=718FTeKqI8vwsgaL6oHfCQ&esq=1&page=1&ndsp=15&ved=1t:429,r:8,s:0&biw=1024&bih=581
    thnx

    See [[How to set the home page]]

  • How to set a particular node selected in a JTree from within the model

    I have an adapter class that provides communication between my JTree and data model. My adapter class implements TreeModel, TreeExpansionListener, TreeSelectionListener and a listener for changes to my data model.
    My data model keeps reference to the currently selected node. It is working quite nicely when I select a tree node with the mouse (the data model is updated accordingly with the node selected), however my problem occurs trying to go the other way (set the selected node in my data model and have it reflected in the tree).
    I know that my selection in the tree is changing correctly as when the selection changes it fires off an event to update the attributes window associated with the currently selected node. I just can't get the node to become highlighted.
    Any ideas would be most welcome.
    Thanks,
    Beck.

    Does your model really have to keep track of the selected item or can the two views (the JTree and the attributes window) not be coupled together in the user interface instead?
    Failing that, you could always consider implementing TreeSelectionModel as well and calling JTree.setSelectionModel since you're keeping track of the tree selection for it already. This is quite a bit of work though.
    If that's too much trouble then if you can work out the TreePath for the node that's been programmatically selected through your model then you could use JTree.getSelectionModel().setSelectionPath. Have a look at tree.getSelectionModel().setSelectedPath(new TreePath(selectedObject)).
    This approach is a bit warped, though, since it implies that your model knows about the view and therefore couples them together.

  • I've got a new laptop, how do set up a new account and what will happen to the old account on my old laptop?

    I have a new laptop and I want to set up a new account. Can I do this when I already have an account set up on my old laptop? what will have to the old account if I set up a new one? how do i set up a new account?

    What exactly do you mean by account?  you wan to set a user on your laptop?
    Do you wan to get a new apple Id on the new laptop? Why?
    Are these laptops Macs?
    What exactly are you trying to do?
    And what does this have to to with Appleworks, which is a long since discontinued Office suit.

  • Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

    I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • How to set up a visual "alert" for new emails received on the Iphone 4s

    Finally converted from a blackberry to iphone 4s.  i have numerous email addresses.  On my old B berry, a red star would appear on each of my email addresses.  This notified me that there was a new message in my inbox for each particular address.  This was helpful since I didn't have to waste time opening each inbox to see if there were any new messages.
    I have checked everywhere in the settings on the Iphone (even my kids can't find it).  When i'm in the Mailbox screen and looking at about 10 email addresses, it would help to have a check mark, bold lettering or something to indicate when a new email is received to a particular address.  If the BB had it, the Iphone should have it.  Any help is appreciated.  Thanks.

    I'm not sure exactly what you are saying here. Are you saying you do not like checking the All Inboxes? Once you go to the Mail app, you get a list of each one of the individual account mailboxes with included numbers for the amount of new mail you have for each account, unless you have something not set up correctly. Each time mail comes in for an individual account you get notified, it is just that the badge will not say 1 for this account, 3 for that account for example. If you received the mail I use for the example, you get a 4 in the All Inboxes, and then the individual numbers for each accounts inbox. Does that answer your question/concern?

  • I purchased a second express to use a extender. not sure how to set it up to for airplay to run off of the original air play from 1st express,

    need help setting up second express as a range extender for my air play from 1st station which is up stairs and plugged into my home theater?????

    I'm a great believer in the KISS principle.
    Configuration is simple if you start from a factory default condition.  Then connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations EXCEPT as noted on the first graphic below.  After confirming that it works, insert your desired administrative and WiFi passwords.  AirPlay is a separate selection.  Refer to second graphic below.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • How to set a dynamic variant for date in select-options in the upper field

    Hi  Variant experts Good Evening!
           I have the following problem while setting up a dynamic varinat .
    Ex: select-options: dat for sy-datum.  
    I am able to save the lower limit as a dynamic value but not able to save the upper values as dynamic in the select-options. Could any of you please help me in this.
    Regards
    Ravi.

    i hope dynamic variant concept is not there,
    but u can use the fn module DYPRO_GET_VALUES  and
    DYNPRO_SET_VALUES
    DYNPRO_GET_VALUES gets the values in the screen,
    DYNPRO_SET VALUES sets the values.
    first get the values, compare and set the values as u want

  • How to set a reason for locked account throught source code with the API

    Hi all,
    I need to set the lock reason of an user account. When we lock a user account at identity management, the system shows us a text edit and keep that lock reason on the account data tab. I need to simulate that, anybody could help me with this?
    Slds,
    MC

    Hi Mariana,
    you can use the below code snippet to lock and maintain the lock reason.
                  IUserAccountFactory uaFactory= UMFactory.getUserAccountFactory();
                  IUserAccount userAccount=uaFactory.getUserAccountByLogonId("user_hr");
                  IUserAccount mutableUserAccount=uaFactory.getMutableUserAccount(userAccount.getUniqueID());
                  mutableUserAccount.setLocked(true,IUserAccount.LOCKED_BY_ADMIN);
                  mutableUserAccount.commit();
    Thanks
    Prashant

  • In the os5, the alphabet in the right of contact is abcd, but in OS7 is A.D.G, how to set it like OS5

    In the os5, the alphabet in the right of contact is abcd, but in OS7 is A.D.G, how to set it like OS5

    You can't. That's just the way it is in iOS 7. Still performs the same task.

  • How to set primary key of the VO.

    I have a problem with the master detail search. The search works fine on the first search, all details can be seen fine, but in the second search I get this error.
    The number of displayed records, 1, exceeds the actual number of records, 0, in view object EgoItemAdvancedSearchAM.MYACCESSOR001_MYLINK001_DetailsOrderLinesVO. Some of the displayed records may have been deleted.
    Somwhere in another thread, someone had the same problem and the soultion was to set primary key of the master VO. I am not sure how to set primary key of a VO. In my case the master VO is dynamic. Is there a way I can set PK of a dynamic VO.
    Any help greatly appreciated.

    Hi
    Thanks for your reply...
    am seting the primary key to VO attribute in my controller(PR)...but its not mapping to the VO attribute..
    OAAttachmentImageBean Ibean = (OAAttachmentImageBean)webBean.findChildRecursive("OpAttachments");
    String[] pkvaule = {"ResAttribute15"};
    Ibean.setPkColumns(pkvaule);
    Regards
    Harrrry

  • How to set DPI of TIFF image

    Please help me.
    How to set DPI of TIFF image using Java/JAI?

    jr,
    The size in pixels in the document will be the size of the image at 72 PPI when Saved for Web. Remember to tick Anti-Aliasing in the Image Size window, and place the artwork (borders) to correspond to whole pixels.

Maybe you are looking for