How do I increase video streaming speed on mobile?

I have a new Azure acct where I have uploaded many videos/blobs into one container. So far my Azure Media service/storage has 10560 MB of video content. I'm working on a phone app so its not live yet, no one is watching/no traffic. But when I play to test
the video directly in the url generated by the "source video" (Mp4) my videos are stopping to buffer when I watch them on my phone using my data connection. It's not a problem with my mobile device or service provider because when I watch youtube
or facebook etc their videos work fine, they don't ever pause.
The Azure videos streams better only when I watch the videos with the phone's LTE feature on or perfectly when I'm connected directly to my office internet service/wifi. I don't want my future viewers to have any delays when watching my videos on the road
when they're using their cellular data connection. Therefore:
1) Where do I go in my Azure to fix this issue, what feature ?
2)And when I do get traffic what else do i need to increase if different? I read this under but I don't know if this applies to my case and what each unit will do because I increased the streaming units from 1 unit 200mbps to 3 units 600mbps but that made
no difference.
https://social.msdn.microsoft.com/Forums/azure/en-US/70506663-b9b1-4b6f-8019-a3d9aaf685cc/bandwith-speed-to-a-azure-instance?forum=windowsazuredevelopment
https://social.msdn.microsoft.com/Forums/azure/en-US/70506663-b9b1-4b6f-8019-a3d9aaf685cc/bandwith-speed-to-a-azure-instance?forum=windowsazuredevelopment
kd9000

Hi Manu,
I saw your links thanks but you did not answer my questions.
We have no problems in streaming the videos blob type, storage type, storage version, cache etc and we're not looking to use smooth streaming or much less Silverlight etc.
I was talking about VIDEO SPEEDS in IN A MOBILE DATA CONNECTION. See Azure's "video test" page under and see how they also buffer/constantly stop in a mobile data connection. So it's not me it's AZURE!
The issue we're having I believe is between the video's speed play between "Azure servers" and an ISP company, example "Verizon Wireless". So being that a "mobile phone data" connections is slower than a "direct" (non-open
public) "wifi" connection, Azure should compensate their connection speeds for these connections. Some time ago it was known that ISP Verizon etc were slowing down video speeds from Netflix etc. mashable
article. I don't think we're at that level, but I think Azure speeds are not compatible to play on mobile "data" connections.
so question is ...What are the Azure delivered speeds ? and who can so something about it?
**Test these 2 links on your cell's "data connection" and then compare with your home/office connection and see the difference.
Also then just play a youtube or facebook, vimeo and see how they perform well on your data connection but Azure test page video does not.
my
test video link here
Azure video test page http://amsplayer.azurewebsites.net (on your phone click on the bottom of the page HTML video)
kd9000

Similar Messages

How to increase video streaming on Mac 10.6

How do you increase on-line video streaming? The training videos I'm trying to watch are so broken and choppy, they're too frustrating to watch.

Hold these three keys together to zoom in:
Option Command Equal
Hold these three keys together to zoom out:
Option Command Minus

How to find out the Streaming speed of a flash player?

Hi guys!
I am Testing web site which is having a flash video files. if I select an video file, it will open a new window and play the video.
now I want to find out the video player in which band with using to play with out any buffering.
Actually our client specified that player can play with out any buffering at 700kbps, I have 1Mb leased line, still it is buffering while playing the video.
Please help to me how find out the streaming speed of player.
Thanks
Tonny

Hi Markus,
I don't think ,there is any report which can help to get the serial no of AP.
Inventory( Report >Report Launch Pad> Inventory) is the ONLY report which gave the below information but NOT the serial no .
Inventory
This report allows you to generate inventory-related information for controllers, access points, and MSEs managed by Prime Infrastructure. This information includes hardware type and distribution, software distribution, CDP information, and other statistics.
*** If anyone knows more deatils on this ,please share with us ***
Thanks-
Afroz
[Do rate the useful post]

How do you increase the Streaming buffer size in iTunes 10

When I try to listen to the radio in ITunes it plays for 30 seconds then says rebuffering stream.
I just upgraded to an iMac and my old dinasaur G4 does not have this problem.
I've read things saying to increase the Streaming buffer size but I don't see how to do this anywhere.
J

I don't think that is possible with newer iTunes versions.

Audio and Video streaming speed to high

I'm struggling for a couple of weeks to stream fm radio to my BB. It switches over to wap, and right after that the buffer starts filling. I hear a coupke of seconds of normal sound, and then the speed doubles. Anyone knows what i'm doing wrong?

It is video transmission only. That is the only example I can find that comes close to what you are trying to do. Together along with this demo:
http://www.ni.com/white-paper/13881/en/
You may be able to piece together what you are trying to do. Other than that, I don't see any current audio/video streaming examples. If you pursue this application, don't forget to give back to the community!
http://www.ni.com/examples/

How to play live Video Stream with Flex?

I'm trying to get Flex Builder 3 to play a live video stream with Flash Media
Server and Flash Live Media Encoder.
I'm able to stream pre-recrorded (vod) flvs in flex from flash media server.
I'm able to stream live video using Flash/FMS/Flas Live Media Encoder, but not
with Flex.
This code streams pre-recorded Video on Demand flvs, but not live streams:
If I change source to "rtmp://localhost/live/livesream.flv, I get nothing.
What am I doing wrong?
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:HBox>
        <mx:Label text="RTMP FMS 2.0"/>
        <mx:VideoDisplay
            autoBandWidthDetection="false"
            source="rtmp://localhost/vod/Legend.flv"/>
    </mx:HBox>
</mx:Application>
Oh and sorry for the double post. I didn't know there was a seperate FMS forum.

That worked! Thanks *very* much. Stupid of me to forget to set the live attribute to true. Also removed the .flv. BTW: what video component do you prefer?
Here's the working code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:HBox>
        <mx:VideoDisplay
            live="true"
            autoBandWidthDetection="false"
            source="rtmp://localhost/live/livestream"/>
    </mx:HBox>
</mx:Application>

Slow video streaming speed

I've recently run into some problems streaming videos online. No matter which sites I visit the loading time is extremely slow. Everything else still works fine, it's just when i try to stream videos that it seems to slow down. I've tried using different internet connections (at home, school, friends) and still had the same problem while other computers using the same connection had no problems at all. I've tried disabling the firewall, emptying the caches, checking quicktime settings, reinstalling video codecs (divx, flip4mac, perian etc) nothing seems to work. Videos stream at 1kb/s but I can download the same video to my hard drive at 300+kb/s. If anyone can help me with this I'd greatly appreciate it.

I've had the same problem more or less since I've owned this MacBook (@ 18 months). It's a 2.2Ghz Intel Core 2 Duo with 2GB of RAM. I've tried all sorts - keeping my Dock items to a minimum,I have a plain Desktop Wallpaper with only 4 Desktop Icons, regularly flush all caches, and (because of the horrendous noise), have done the "Reset" thing on more occasions than I care to remember. I've also kept all video players up to date. Snow Leopard has further exacerbated the problem. Nothing has so far worked for me.
Although I had Apple Care for the first 12 months, I didn't think I needed it any longer so I let it lapse, although I still pay for MobileMe. Since experiencing the "Case Cracking" phenomena, I've tried contacting Apple without success, and I really don't see why I should traipse over 140 miles and pay for a Genius consultation to get the case issue resolved.
The video slowdown is just the tin hat on everything for me. What I have here is an almost unusable piece of cracked junk (almost forgot the keys are also coming away!) that cost me well over a grand. Can you imagine what I said to my wife when I learned she was planning on buying me an iMac (she has the MacBook Pro - which in fairness, isn't plagued with problems)? I've got enough Apple stuff to fill a small suitcase (iPhones, iPods, computers, peripherals), but I won't be buying any more. A sub 500 quid machine running any MS OS or Linux has got to be miles better than this. Good luck in your quest.

How do I increase the processing speed on my Pro Retina in Final Cut ProX?

I have a 2012 pro retina w/ 16 GB, I am trying to make a time lapse video in FinalCut w/ appx 10,000 stills shot at 1080 on a GoPro. I know this is a lot and life would be a lot easier w/ a Thunderbolt. I'm using CleanMyMac2 to free up some space and am moving the nearly 80 GB of photos onto a 1TB external to see if that speeds processing up a bit.
Any other thoughts/suggestions on increasing speed?

You can't use Disk Utility to securely erase a Solid State Disk drive, because of the fact that SSD's have limited write capability, unlike hard drives, thus have to protect the sectors from as little writes as possible.
In fact TRIM (wear leveling) is enabled to write new data to the least used sectors on a SSD each time.
The NSA guidelines for secure data destruction on SSD's is to grind them into a fine powder.
If you don't require this level of data destruction, you can do this trick below, but not often or you'll premaurely wear out your SSD.
Finder > Duplicate a small file repeatly in a folder until slightly more than 50% of the remaining free space on the SSD is used up, (use Activity Monitor) then delete this folder.
Then duplicate a different small file repeatly in another folder in the same manner.
What this will do is, because of the small file, OS X will fill the smallest unused spots on the SSD, the duplicates will fill the remaining free space half way, then the second folder will (because of TRIM) fill the other remaining 50% of the free space.
You can't fill your boot drive or the machine can refuse to function or boot, but because of the wear leveling this should overwrite all your available free space on the SSD once.
If you have a laptop and TimeMachine, there is a hidden database on the boot drive which will store a copy of the deleted data.
Then there is "versions" and it's possible a copy of the deleted data is stored in that cache file still on the SSD.
I can advise how to delete the TimeMachine backup file on the boot drive, but not the "versions" database or what it contains.
How do I securely delete data from the machine?
If your really paranoid it's likely best to reformat the entire MacintoshHD partition from recovery and then with a new user, then do the Finder > Duplicate procedure to overwrite the deleted data off the SSD, this way the "versions" and TimeMachine databases are also overwritten.
Nothing is safe anymore.

How to access my video stream on icloud from mac

I have pictures and videos on my shared stream that I took/recorded from my iPhone 5S. I don't know how to access these files from may MacBook Pro because I want to move these files to my hard drive on my MacBook Pro. Please help. Thank you!

iCloud requires OS X 10.7.5 or higher, and iCloud photo sharing (which includes shared videos) requires OS X Mavericks v10.9 and either iPhoto '11 version 9.5 or Aperture 3.5. Without these, you can't access the shared stream videos on your Mac. However, at the present time you cannot save a shared video from a shared stream anyway, you can only view it. If you want it on your Mac you’ll need to import the video to iPhoto from your camera roll using your usb cable as explained here: http://support.apple.com/kb/HT4083.

How can I put video stream on flash media server on to website running on IIS7?

We are encoding live video feed using Flash Live Media Encoder and publishing it using Flash Media Server. Is there any documentation on how I can put this publishing point on a website running on IIS7?

Sorry - but not very clear what you are trying to achieve here - can you please elaborate what you want to do?

How can I increase the retriggering speed of 6534?

I try to write into PCI 6534 buffer and generate the same output every time a trigger pulse is detected at the "start trigger" pin.
I'm playing with retriggabble_output.vi example using 1 Mhz clock speed. The problem is that there is about 4msec dead time between two triggering events.
How can I reduce this time? ( the program doesn't work without the "digital I/O wait" VI. So I set it to 1 msec).
My second question is:
How can I write a long data sequence onto the buffer and output one portion of the data every time a triggering event occurs? For instance, the data in the buffer is a 128 element array, and the output is only 32 elements upon a reception of a triggering signal.When the next triggering sign
al is received the following 32 elements in the buffer are sent to the output port.
Thank you,

Hello,
When trying to retrigger output with a 653x device, there is some amount of software overhead. This is unavoidable as the board itself does not support retriggering. However, there are two solutions to this problem, one is a fast software reset, and the other is to create a retriggered pulse train.
If you want to use software for resetting the trigger, then there is a good example for doing this. The example uses a call that preserves a configuration setup. Take a look Here.
If you would like to use hardware to solve this problem, take a look pd4?p_guid=B123AE0CBAFD111EE034080020E74861&p_node=DZ52321&p_source=External�>Here. This example does require a counter timer board, which supports retriggering.
Best regards,
Justin Tipton
National Instruments

How to use rtmp video streaming using wowza server in iOS?

I was trying to implement video chat ios application i want to use wowza server. I worked on http streaming and its working but, i need live chat so i need to use rtmp.
Can any one help me to have sample code to stream vedio from wowza local server using rtmp protocol
or any tutorials..

You can add "hint" tracks via AppleScript (download the collection):
http://www.apple.com/applescript/quicktime/
Of course, these only run on a Mac.
You may have other issues with formatting and should check the FAQ page at the QTSS Site.

How to input live video streams to a powerbook?

How do I input multiple video cameras into a Mac (over Thunderbolt)?
And what devices would you recommend?
I would like to be able to have two or more cameras feeding into a Macbook Pro simultaneously. I'm looking at making a MaxMSP app for a video artist I know, to replace an enormous box of hardware that he put together years ago. The app & the output are not a problem, but as most of my other work is in audio, I have no idea if it's possible to have multiple cameras feeding into a Mac. These will be SDI cameras (or older devices running through convertors).
Thanks in advance....
David

This topic has been aroundfor a decade and there is one thing we've learned from hundreds of similar posts: do not reoly on the captured video in your computer to be your only copty of the program. Drives fail. Clients trip over power cords. Firewire is a non-locking connection, totally unreliable. Even in the days of ultrareliable videotape, we oftne ran a VHS protection copy off a video/audio loop.
Have a tape or chip backup recording of your video feed.
bogiesan

How do i increase video storage

My iPhone only records a few minutes of video, then it stops and says that there is no more storage. It also says to change the video storage in settings. but I can't find where to make the change?

Not on the device itself. You can remove content that you don't use too often and transfer it into iTunes to get back space - or simply delete stuff and download it again if you want - but you cannot add storage capacity to the device itself.

How to download youtube video to your smart mobile...

Do you like to watch youtube videos and take them with you everywhere?
Recently, I find a very good program that makes a perfect solution for the youtube video download and conversion.
It is Any Video Converter.I test it and was impressed by its simplicity and intuitive interface and the powerful functions it behold.
Any video Converter converts almost all video formats including DiVX, Xvid, MOV, rm, rmvb, MPEG, VOB, DVD,WMV,AVI TO MPEG-1,MPEG-2,MPEG-4, 3GP or FLV movie formats. It also supports importing FLV video directly from YouTube and Google Video.
I find it at a review platform,you can also visit at:
http://www.m2review.com/any-video-converter.html

Hi Even42
Thank you for posting on our forum!
Using your Nokia Asha 200, check if you can download Youtube downloader from Nokia Store.
Hope this will help you.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

How do I increase video streaming speed on mobile?

Similar Messages

Maybe you are looking for