How do I initialize Ultrabeat? - i want to build my own kit from a sam...

Hello everyone,
i've done this before!, but now i can't remember how.
i want to first initialize UltraBeat and then hopefully, just drag and drop .wav samples into UB to create a new kit. I hope it's as easy to do this as it is in the EXS sampler.
Also, is it possible to import an EXS instrument into UB?
thanks in advance for the help!,
Tom
www.tomcarden.net

When opening a new instance of UB it is set to "default" but already contains instruments mapped out on the keys. So if you want a totally empty Instrument you would have to edit that and save it in your template or User Library. If you right click/control+click on any Instrument in the UB mapping editor a menue opens - at the bottom choose "Init" and select the mode you want to be that Instrument in (e.g. Sample/Sine and so on).
You can't drag and drop samples into UB you have to use the "Import" menue - so right click on an Instrument->Init->at the upper left you see the blue import button->menue opens->choose a sample from a folder. Or use the "load sample" function in the sample window of each Instruments, at the upper left of the sample window there is tiny downwards arrow which will unfold the "load sample" menue.

Similar Messages

How I can display the values in one row when they come from the same colum

This query
SELECT
sorints_ints_code
FROM
saturn.sorints a,
connman.cc_adm_prospect_master
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = prospect_pidm
give me the results of
ZA
ZB
ZC
I want to use this query in a cursor to update a column in another table, the problem is that I need to update the table concatenating the values ZA,ZB,ZC
I have 24 different codes stored in the column sorints_ints_code, so I don’t want to use 24 different cursors and I don’t to use cross reference, It is there any way that I DON’T know to display the data like this za,zb,zc without using cross reference, I don’t want to use the table 24 times…
Like THIS, this is only for two values…
SELECT
a.sorints_ints_code,
b. sorints_ints_code
FROM
saturn.sorints a,
saturn.sorints b
connman.cc_adm_prospect_master
WHERE
a.sorints_ints_code = ‘ZA’
AND a.sorints_ints_code = ‘ZB’
and a.sorints_pidm = prospect_pidm
and b.sorints_pidm = prospect_pidm
REMEMBER, I have 24 different values
I am trying to write a procedure like this;
Someone suggest this v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
BUT IT IS NOT WORKING!!!
PROCEDURE prospect_coach_interest_upd
p_prospect_term_code IN srbrecr.srbrecr_term_code%TYPE,
p_prospect_admin_err_code OUT VARCHAR2,
p_ora_err_code OUT NUMBER,
p_ora_err_msg OUT VARCHAR2
) IS
v_out_path VARCHAR2(40) := '/home/connman/student';
v_out_file VARCHAR2(40) := 'cc_adm_prospect_'||p_prospect_term_code||'_'||TO_CHAR(SYSDATE,'YYYYMMDDHH');
v_file_handle UTL_FILE.FILE_TYPE;
v_pidm NUMBER;
v_int_code1 varchar2(30);
v_int_code2 varchar2(2);
v_int_code3 varchar2(2);
CURSOR cur_pidms IS
SELECT prospect_pidm
FROM connman.cc_adm_prospect_master
WHERE prospect_term_code = p_prospect_term_code
FOR UPDATE;
CURSOR interest_coach_cur is
SELECT
sorints_ints_code
FROM
saturn.sorints
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = v_pidm ;
interest_coach_rec interest_coach_cur%ROWTYPE;
BEGIN
UTL_FILE.FCLOSE_ALL;
v_file_handle := UTL_FILE.FOPEN (v_out_path, v_out_file, 'a');
UTL_FILE.PUT_LINE (v_file_handle,
CHR (10) || TO_CHAR (SYSDATE, 'DD-MON-YYYY HH:MI:SS')
UTL_FILE.PUT_LINE (v_file_handle, 'Entering the Admin Name procedure.');
--- BEGIN
FOR rec_pidms IN cur_pidms
LOOP
EXIT WHEN cur_pidms%NOTFOUND;
v_pidm := rec_pidms.PROSPECT_pidm;
v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
IF interest_coach_cur%ISOPEN
THEN
CLOSE interest_coach_cur;
END IF;
OPEN interest_coach_cur;
FETCH interest_coach_cur
INTO interest_coach_rec;
IF interest_coach_cur%FOUND
THEN
UPDATE
connman.cc_adm_prospect_master
SET
PROSPECT_COACH_INTEREST = interest_coach_rec.sorints_ints_code
WHERE CURRENT OF cur_pidms;
END IF;
END LOOP;
COMMIT;
p_prospect_admin_err_code := '0';
UTL_FILE.put_line (v_file_handle, 'Successful Completion.');
EXCEPTION
WHEN OTHERS
THEN
p_prospect_admin_err_code := '1';
p_ora_err_msg := SUBSTR (SQLERRM, 1, 2000);
p_ora_err_code := SQLCODE;
END; -- prospect_coach_interest_upd;

Search in the forum or web you will find many solutions
Return multi-row result as one comma-delimited row
http://www.oracle-developer.net/display.php?id=412

How to read three parameters for exemple temperature,current and voltage from the same port with visa read and separate them in a table

Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.

[email protected] wrote:
Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.
The short answer is: "Yes, of course." But you are going to have to do the legwork and learn LabVIEW basics before we can offer meaningful help.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How do I get iTunes to play all the songs and albums from the same artist?

Before the update, you used to be able to play all the songs from the same artist across all albums (ie: you have 2 albums from the same artist, you start one, it would play through both in order). Why did this change, and is there some way to get it to work?

Have you read the link that roaminggnome posted ? What you can redownload will depend upon what country that you are in (music, films, TV shows can't be redownloaded in all ; audiobooks and ringtones are one-time only downloads), whether the item is still in your country's store (content providers occasionally remove them), and whether you've moved countries since buying/downloading them.

I want to build an online shop from scratch.

Am i better to use muse or dreamweaver and are there widgets i can use to put framework in place

Are you looking to build, launch and grow your online business from scratch ?
All you have to do is -
1. Choose the best product
Find the product opportunity
Identify the customers and their passion
2. Do some research
Reach your competition
Have business plan
3. Setting up the business
Name your business
Have your own logo
Build store
4. Prepare and launch
Choose the shipping strategy
Get your email marketing ready
Decide your KPI
5. Now launch
Market your store
Drive traffic
Convert to sales
You have to choose the right shopping cart script for your online store, the software must meet your business requirement.

HT3819 how do i choose what I want from my itunes library on my iphone

How do I choose what I want to put onto my iphone from itunes? I dont want all my kid's music and apps

Hey Dodge50,
Great question! You can choose to sync your entire library, or selected playlists and other items. For more information, check out this resource:
Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
http://support.apple.com/en-us/HT1386
You can also opt to manually manage the content that is on your device. For more information about this option, see the following:
Manage content manually on your iPhone, iPad, and iPod - Apple Support
http://support.apple.com/en-us/ht1535
Thanks,
Matt M.

Can't get more than one Ultrabeat sound setting in one project. If I have a drum track with an Ultrabeat "downtempo kit" and I make another drum track with "hip hop kit" in the same project, the settings of the other track transform to "hip hop" setting.

So here's my situation. I'm using Logic Pro 9. I'm trying to use multiple drum tracks each with different Ultrabeat settings. So let's say I have drum track with a loop from Ultrabeat that has the "downtempo kit 2" setting on it. If I make another drum track and create a different loop in Ultrabeat with a different setting, let's say "hip hop kit" for example, and put that loop onto the new track, then the previous loop that I had in the first drum track will still be the same loop but the sound kit settings change to that of "hip hop kit." So I can have different loops, but they all have to be "hip hop kit" settings or "downtempo kit 2" settings. I am unable to multiple kit settings. Is there a box I need to check to turn some automation off or something, because this is pretty inconvinient? Why do I have to have only one Ultrabeat sound/kit setting per Logic project?

Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

How can i delete photo albums of my iphone 5 i downloaded from pc

How can i delete photo albums of my iphone 5 i downloaded from pc

The same way you put them there. The sync process.
Open itunes, connect iphone. select only what you want to be on the iphone, sync

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

How can I initialize an external hard drive when disk utility won't work?

Have a Seagate 300 GB external firewire drive. Formatted it for Mac. Had worked great and then one day it would not mount, got message box with choices of "initialize", "ignore" and 'eject". Clicking initialize, disk utility comes up with only the "first aid" button showing active. When I click on it nothing happens. As far as I can tgell there are no other options
Any suggestions on how I can repair this drive or recover data would be much appreciated.
Thanks, Jim

OK, I suspect First Aid may be blank since Disk Utility "sees" the device but does not think there's anything on it.
1. How about if you select the drive and then click the Erase tab?
2. Also, what happens if you connect the drive, select Ignore, then open Disk Utility? Does the drive show up?
3. What's your objective here? Do you want to try to recover data from the drive, or simply erase it? If you're looking to recover data from the drive, see my "Data Recovery" FAQ.
4. Do you know what happened before the problem arose? For example, was there a power outage or was the cable or drive suddenly disconnected before the drive was Ejected? Any of these events can result in the drive's partition map being corrupted, leading to the kind of problems you're seeing.
5. Did you build this FireWire drive? That is, buy and enclosure, buy a drive, and install the latter in the former? If so, have you checked the connections?
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How do I initialize/format a Lexar usb drive

The topic pretty much says it all. I put in a lexar usb drive and wanted to initialize in in OS 9.2.2 as HFS+ and can't figure out how to do it. I wanted to use it to back up some files without losing the resource fork, if there is one. Thanks for any info.

Grey Bird: Your question prompted me to boot my Powerbook into OS 9.2.2 for the first time in a long while. The Finder's "Erase Disk" command (in the Special menu) is happy to erase my Lexar JumpDrive Secure in either Mac OS Standard (HFS) or Mac OS Extended (HFS+) format. It does not offer the option of DOS format, and I suspect that's because the drive is currently in a Mac format. If it were currently in DOS format, I'm not sure the Mac formats would be offered as options.
If using the Finder command works for you, I heartily recommend avoiding the use of third-party disk formatters, not only because they cost $, but also because they may well give you headaches down the road that you can do without.

How can i initialize variables and append variable in bpelx:exec

I want to know how to initialize variables in bpelx:exec.
I try to use java embedded activities for dynamic sql query. But I meet some problems that cannot assign the data to tempVariable. because I don't initialize tempVariable. but I can't initial variables in java embedded actitvities. How can i initialize variables in bpelx:exec ?
and I want to know to extend child Elment of tempVariables dynamically in bpelx:exec ?
here is my source.
<bpelx:exec name="callEmpDB" language="java" version="1.5">
<![CDATA[
String url = "jdbc:oracle:thin:@127.0.0.1:1521:wonchoi";
String user = "scott";
String passwd = "tiger";
int index = 1;
Connection conn = null;
Statement stmt = null;
ResultSet rs = null;
Node node = null;
try{
conn = DriverManager.getConnection (url, user, passwd);
stmt = conn.createStatement();
String wherescript = "";
Element empno = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:empno");
Element ename = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:ename");
Element job = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:job");
Element deptno = (Element)getVariableData("inputVariable","payload", "/client:selConnectDBProcessRequest/client:deptno");
String sql = "select empno, ename, job, mgr, hiredate, sal, comm, deptno from emp where 1 = 1 ";
if(empno != null && empno.getTextContent() != null && !empno.getTextContent().equals("") )
wherescript = wherescript + " and empno = " + empno.getTextContent() ;
if(ename != null && ename.getTextContent() != null && !ename.getTextContent().equals("") )
wherescript = wherescript + " and ename like '" + ename.getTextContent() +"' " ;
if(job != null && job.getTextContent() != null && !job.getTextContent().equals("") )
wherescript = wherescript + " and job = '" + job.getTextContent() +"' ";
if(deptno != null && deptno.getTextContent() != null && !deptno.getTextContent().equals("") )
wherescript = wherescript + " and deptno = " + deptno.getTextContent() ;
sql = sql + wherescript;
System.out.println("sql : "+sql);
rs = stmt.executeQuery(sql) ;
while (rs.next())
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:EMPNO", rs.getString("empno"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:ENAME", rs.getString("ename"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:JOB", rs.getString("job"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:MGR", (rs.getString("mgr")==null? "": rs.getString("mgr")));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:HIREDATE", rs.getString("hiredate"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:SAL", rs.getString("sal"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:COMM", rs.getString("comm"));
setVariableData("tempVariable", "payload", "/ns1:selEmpOutputCollection/child::*[position()="+index+"]/ns1:DEPTNO", rs.getString("deptno"));
index++;
}catch(SQLException sex){
System.out.println("sql error");
}catch(Exception ex){
System.out.println("error");
}finally{
try{
rs.close();
stmt.close();
conn.close();
}catch(Exception ex){}
}]]>
</bpelx:exec>
and here is tempVariable examples and schema.
<tempVariable>
     <part name="payload">
          <selEmpOutputCollection>
               <selEmpOutput>
               <EMPNO/>
               <ENAME/>
               <JOB/>
               <MGR/>
               <HIREDATE/>
               <SAL/>
               <COMM/>
               <DEPTNO/>
          </selEmpOutput>
          <selEmpOutputCollection>
     </part>
</tempVariable>
<xsd:element name="selEmpOutputCollection" type="selEmpOutputCollection"/>
<xsd:element name="selEmpOutput" type="selEmpOutput"/>
<xsd:complexType name="selEmpOutputCollection">
<xsd:sequence>
<xsd:element name="selEmpOutput" type="selEmpOutput" minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="selEmpOutput">
<xsd:sequence>
<xsd:element name="EMPNO" type="xsd:decimal" nillable="true"/>
<xsd:element name="ENAME" type="xsd:string" nillable="true"/>
<xsd:element name="JOB" type="xsd:string" nillable="true"/>
<xsd:element name="MGR" type="xsd:decimal" nillable="true"/>
<xsd:element name="HIREDATE" type="xsd:dateTime" nillable="true"/>
<xsd:element name="SAL" type="xsd:decimal" nillable="true"/>
<xsd:element name="COMM" type="xsd:decimal" nillable="true"/>
<xsd:element name="DEPTNO" type="xsd:decimal" nillable="true"/>
</xsd:sequence>
</xsd:complexType>
thanks

My bpel project flow is as follows.
First, I initalize the temp varialbe like this.
<assign name="setInitialVar">
<copy>
<from>
<ns1:selEmpOutput xmlns:ns1="http://lgesoa.lge.com/EmpSpec/types">
<ns1:EMPNO/>
<ns1:ENAME/>
<ns1:JOB/>
<ns1:MGR/>
<ns1:HIREDATE/>
<ns1:SAL/>
<ns1:COMM/>
<ns1:DEPTNO/>
</ns1:selEmpOutput>
</from>
<to variable="tempVariable" part="payload"
query="/ns1:selEmpOutputCollection/ns1:selEmpOutput"/>
</copy>
</assign>
Second, get Data(ex. 10 Employee Information List) from DB for useing Java embedded activity.
Third, assing employee info to tempVariable, then BPEL assign just only one Employee Information. and next data can't assign and the BPEL make an error.
here is my error message..
<2007-03-02 11:23:26,125> <ERROR> <default.collaxa.cube.engine> <BPELXExecLet::setVariableData>
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {null}
parts: {{summary=oracle.xml.parser.v2.XMLElement@15f80b}}
     at com.collaxa.cube.xml.dom.DOMUtil.copy(DOMUtil.java:536)
     at com.collaxa.cube.engine.ext.BPELXExecLet.setVariableData(BPELXExecLet.java:721)
     at com.collaxa.cube.engine.ext.BPELXExecLet.setVariableData(BPELXExecLet.java:700)
     at bpel.selconnectdb.ExecLetBxExe4.execute(ExecLetBxExe4.java:160)
     at com.collaxa.cube.engine.ext.wmp.BPELXExecWMP.__executeStatements(BPELXExecWMP.java:49)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1083)
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:132)
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:161)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
I analyzed the problem. and I find the reason that is I just assing one XML flag to the temp variable. If i don't initalize the varaible like first step, BPEL make an error above error message.
thanks
Won.

How can i initialize a button (Switch when pressed) to be always disabled when i start the programm.

Hello
How can i initialize a button (Switch when pressed) to be always disabled when i start the programm. My problem is that the state of the button is always the state in which it finihed last time.
Thanks
Lukas

A button is either true or false. "Disabled" is a property that determines if the button can be operated or not.
It seems from the rest of your question that you actually want to ensure that it is set to false, but remain enabled. This is easiest done with a local variable as already mentioned by becktho.
If you want to disable the button, use a property node.
LabVIEW Champion . Do more with less code and in less time .

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

I want to load a sales order from xml file. How can I do.

Hi,
I want to load a sales order from XML file. How can I do ? how can i create the sales order?
what are the necessary setting for create the sales orders.
with Regards,
Prakesh.

Three options come to my mind.
Option 1: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (BAPI) and Program (CREATEFROMDAT2).
Option 2: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (DINP) and Program (RVINVB10).
Option 3: Translate the xml to IDoc so that ORDER04 / ORDER05 Idoc can be used to create Sales order (WEDI transaction).

How do I initialize Ultrabeat? - i want to build my own kit from a sam...

Similar Messages

Maybe you are looking for