How do I insure that the VISA driver is installed when I insatll my application using the application builder?

One some PC's , when I sniatll my applciation build with teh applicaio buider, it apperas that the VISA drivers are missing. In other cases it install them fine.

Hi Juand,
I have included some screenshots of where you would be able to see the VISA runtime in both MAX and in the installer page if you have it installed.
If you do not have it installed, it can be downloaded at www.ni.com/downloads. Although the runtime should have been installed with the full version of the driver.
Scott G.
AE Specialist
National Instruments
Attachments:
VISAinINSTALLER.jpg ‏541 KB
VISAinMAX.jpg ‏461 KB

Similar Messages

Splitting the "To" field when crawling an email and then using the "To" field as a refiner with single email addresses

Hi
I am using SP2013 SP1 with the September 2014 CU.
When I crawl an email I use the "To" field subsequently as a refiner.
Unfortunately, if the email has many email addresses in the "To" field, they all appear in the refiner which is not much help if you only want to refine by a single email address.
IS there a way of splitting the list of email addresses in the "To" field into separate email addresses so that the field can be used as a refiner, with each refiner entry having a single email address ?
I have seen articles for SP2010 FAST search, but not for SP2013 Search or do I need to get involved in Content Enrichment / Content Extraction for there appears to be little documentation available on these.
I would have thought this would have been a fairly popular feature.
Regards
Nigel
Nigel Price NJPEnterprises

Hi，
According to your description, my understanding is that the "to"search refiner has many email address when searching the "To" managed property in SharePoint 2013. but you only want to refine by a single email address.
Whether you create custom "To" managed property, and then you can search email address with the "To" managed property.
The refiner value is correspond to the crawel property(column value), when you search different email adress, you would get different refiner values.
If the issue exists, Please offer a screenshot about your issue and tell "To" managed property is mapping to which crawl property.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can i insure that job finished and good and send mail to the user ?

how can i insure that job finished and good ,
and how can i send mail to the user "ok" ?

Hi Dakota. We do something simular with our nightly MRP job. Our MRP job runs around midnight, then we kick off another job about 4am which checks to see if any of the jobs in question have abended, if so, then it sends an email to the email addresses specify in the report variant. Of course, this could be modified to check for successfully complete jobs, if that is your requirement.
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
 TBTCO.
DATA: MAILDATA LIKE SODOCCHGI1.
DATA: MAILTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR: MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
 PERFORM BUILD_TEXT_MESSAGE.
 PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
* Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
 INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
 WHERE JOBNAME IN S_JOB
 AND STATUS = 'A'
 AND JOBCLASS IN S_JOBC
 AND SDLSTRTDT = SY-DATUM.
ENDFORM.
* Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
 INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
 DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
 I_TBTCO-SDLSTRTTM+2(2) ':'
 I_TBTCO-SDLSTRTTM+4(2)
 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
 INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
 INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
* Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
 CLEAR MAILREC.
 MAILREC-RECEIVER = S_REC-LOW.
 MAILREC-REC_TYPE = 'U'.
 APPEND MAILREC.
ENDLOOP.
ENDFORM.
* Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 EXPORTING
 DOCUMENT_DATA = MAILDATA
 DOCUMENT_TYPE = 'RAW'
 PUT_IN_OUTBOX = 'X'
 TABLES
 OBJECT_HEADER = MAILTXT
 OBJECT_CONTENT = MAILTXT
 RECEIVERS = MAILREC
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 OTHERS = 8.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* Form FORMAT_DATE
FORM FORMAT_DATE USING IN
 OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
 EXPORTING
 DATE_INTERNAL = IN
 IMPORTING
 DATE_EXTERNAL = OUT
 EXCEPTIONS
 DATE_INTERNAL_IS_INVALID = 1
 OTHERS = 2.
ENDFORM.
Regards,
Rich Heilman

Norton Internet Security cannot scan emails the use SSL. How do I insure that I do not get a virus or malware by opening an email in Thunderbird?

Norton Internet Security cannot scan emails the use SSL. How do I insure that I do not get a virus or malware by opening an email in Thunderbird? I have read that you don't have to click on a link to get malware but that some email can trigger malware just by opening and reading. Any suggestions to keep my emails from triggering malware? AOL Desktop software has it's own built-in email scanner but I'm trying to get away from using their software and rely just on TB.
Thanks

There are many aspects to this question.
First, using SSL or TLS to send and receive email is important because it prevents others from sniffing your email login. Particularly if you are using a device over wi-fi or on untrusted networks, this is critical because if others obtain your email login, bad things can happen.
Of course, using SSL or TLS with your mail server also protects the content of your email from being captured by others, so that's good too.
Second, you are correct that there can be security threats in email other than the attachments, although the attachments generally are the most dangerous. Your antivirus should protect you from bad attachments because in order to open them, they need to be written to disk in a temporary folder, and your AV software leaps into action whenever a new file is added to disk. You also can hedge your bets by using a two-step approach: first save the attachment to disk and only after it survives the real-time AV scan then launch it in the appropriate application.
Sometimes content in the message body can trigger a vulnerability in your email software or a plugin. As these vulnerabilities become known, Mozilla updates its software, but there seem to always be new issues discovered and there will never be perfect security. I'm not sure how helpful email scanning is for this problem.

How do I insure that Firefox is my full-time browser -- I was using Internet Explorer prior to downloading Firefox. Shud I delete Internet Explorer?

I want to only use Firefox as my full-time browser. I do not want to use Internet Explorer because it doesn't work on a web site I want to use, but Firefox does work. All I want to know is how do I insure that Firefox will be my full-time browser?

Please do the following: 
#Start Internet Explorer. 
#Click Tools | Internet Options and then click the Programs tab. 
#Remove the checkmark from: "''Tell me if Internet Explorer is not the default browser''. 
#Click Apply/OK and then close Internet Explorer. 
#Start Firefox, click the orange Firefox button, go to Options | Options | Advanced. 
#In the General tab, menu at the bottom, checkmark "'''Always check to see if Firefox is the default browser on startup'''" and then click the "''Check Now''" button. 
#Click OK.
That's all there is to it.

I havea 2007Mac Book Pro and a Genius told me that it is "vintage" and that the "logic board" is bad. He removed the hard drive and told me to buy a "sled" to retreive the data. Is it worth trying to fix it so that I don't have to buy a new one?

I have a 2007 Mac Book Pro and a Genius told me that it is "vintage" and that the "logic board" is bad and no longer supported. He removed the hard drive and told me to buy a "sled" to retreive the data. Is it worth trying to fix it so that I don't have to buy a new one? Where should I take it? Thanks.

djgornik,
if the Genius is correct and the logic board is bad, then replacing the logic board would be fairly expensive. What problems are you seeing with your MacBook Pro that caused you to visit the Genius in the first place? Whether it’s worth trying to fix it or not depends on your particular circumstances, such as your willingness to trade time for money in pursuing repair vs. replacement.

How do you add an iTunes Gift Card so that all purchases of any members of a Family Sharing Group can use the credit?

How can all family members of a Family Sharing Group use a gift card that has been been applied to the iTunes master account? I added a gift card to our master iTunes account for my grandson, and even though he's a family sharing group member, none of the purchases I have approved from his requests have used the gift card credit. A search of the iTunes support site failed to turn up anything that even remotely addresses this topic. It would seem reasonable to assume that any purchase made by any family member should be able to use the gift card credit since all purchases go through the master account, but this does not appear to be the case.

Regarding your statement about the gift card balance being used if redeemed to the organizers account - http://www.apple.com/feedback.
Regarding redeeming the gift card to the child's account, it is the same as redeeming to yours. You have to be signed in to the iTunes store using the child's apple ID, then redeem the gift card there. If you already redeemed the card on your ID, you won't be able to redeem it again.
Redeem and use iTunes Gift Cards and content codes - Apple Support

I uploaded the giftcard money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

i put money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

If you still have your old card listed on your account then try selecting the 'none' option and remove it and then try entering the card's details from scratch. If that doesn't work then what is the full error message that you are getting, and the card is registered to the same name and address (including format and spacing) that you have on your iTunes account ?

Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?

Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?

See this thread:
https://discussions.apple.com/message/20635110#20635110

Hello, My computer crashed, I removed the hard drive and installed it into a hard drive enclosure and now I am trying to get my Thunderbird data off of it

Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
AN

lets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows.

I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
any help or advice would be really appreciated, thanks

Boot Camp is used to support Windows on the same drive.
You can have a different OS on every drive.
You could have Windows 7, Vista, and XP all on one drive if you so choose.
I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
Remove all your other drives while you install Windows 7.
You could even relocate XP - if you need it even - or recover the hard drive space.
You should always keep 30% free for Mac OS; same for data/media drives.
Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

HT204053 How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone? Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't

How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone? Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't appear.

Does any music show in the Purchased tab on the iTunes store app on your phone ? Music can't be re-downloaded in all countries, and even where it can be it will only appear whilst it remains in the store. Do you have your purchases on your computer and/or on a backup of your puchases so that you can sync them to your phone ?

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

How do I insure that the VISA driver is installed when I insatll my applicatio​n using the applicatio​n builder?

Similar Messages

Maybe you are looking for

How do I insure that the VISA driver is installed when I insatll my application using the application builder?