How do I know the bind variables in sql_text of V$sql

I query V$sql ,v$sqlarea,V$SQLTEXT, the sql_text show like select customer_name from customer where id = :B1;
How can I to get the value of :B1?
I want to know the entire SQL command, What should I do?

Satish Kandi wrote:
Not too sure but check out GV$SQL_BIND_CAPTURE.Satish,
I remembered reading an anomaly that JL posted about it, I guess it would be helpful for OP to know that there may be parameters which can tweakthe behaviour of this view.
http://jonathanlewis.wordpress.com/2008/07/24/bind-capture/
Regards
Aman....

Similar Messages

  • How to set the bind variable on page load and execute query ?

    Hi All,
    I am using Jdeveloper 11.1.1.5
    I have a table called "Employee"
    Columns :- id , name , location
    Data :- 1, ,james , chicago
    2 ,Raj ,capetown
    Now i have another webservice(created as a webservice dataControl) which sends me the "id" on each time my page loads.Now the id which has been returned by webservice should be incorporated in my VO Query as in where clause to fetch the data for the respective "id" in that "Employee" table and should be rendered on form.
    Eg :- Id "2" has been sent by the webservice then the record should be fetched from database should be "2","raj","capetown".
    I know that there would be necessity of bind variable , but how do i set the bind variable on page load ?
    How can i use the bind variable appropriately ??
    Please suggest !!!!
    Thanks.

    Hi,
    Check
    http://www.orastudy.com/oradoc/selfstu/fusion/web.1111/b31974/web_services.htm#CJADCDBG
    http://thepeninsulasedge.com/frank_nimphius/2011/02/18/adf-code-corner-sample-73-released-hands-on-creating-a-search-form-using-a-pojo-ws-and-the-web-service-data-control/
    -Suresh

  • Extract the "bind" variables for a given query running in 10g.

    how can we extract the "bind" variables for a given query running in 10g? The performance of a query may vary based on the parameters supplied to it. For example, a query like the following
    SELECT * FROM CUSTOMER_ORDERS WHERE CUSTOMER = :CUST_ID
    .might run differently when the :CUST_ID is "123" who may have very few orders versus "456" who may have tens of thousands of orders.
    So, if we see a spike in the system due to a query, we need visibility into what the exact query syntax and values are for any database session. We're aware of an Oracle view called V$SQL_BIND_CAPTURE, but what we're finding with this view is that it's only a snapshot of variables that are refreshed on an interval. That view does not give us a live view into what values are being used in the various sessions in realtime.
    If someone ould provide us with some SQL (or other means) to do get a realtime view into the SQL and variables currently running in the database, it would be greatly appreciated.

    In addition to what's been said in the other thread, you could add a layer of logging either in the database or out.
    v$sql_bind_capture and the associated ash view dba_hist_sqlbind contain sample data.
    You could up the sample rate but it's not advisable - it's still just a sample.
    If you're on 11g, this is where adaptive cursor sharing might help.
    Not help in finding the values of your binds, but help in using different plans where there is such a skew for different bind values and the plan is perhaps wrong for customer 456.
    The problem when you're got such a skew and you're using bind variables is that the two don't really go together.
    When the query is next parsed and you've got bind variable peeking enabled, you might get the 123 plan is that is the bind value at parse time and then run into problems for 456 or even vice versa.
    See http://jonathanlewis.wordpress.com/2009/05/06/philosophy-1/ for a discussion on binds and histograms which reflects the reasons for using either.

  • How to assign sessionscope variable to the bind variable in Query of VO

    Hi all,
    I want to know how to assign a sessionscope variable in the binvariable of Query in VO
    My sessionscope variable holds the value of currently selected column in the table. eg:empname of the currently selected column which is in empdetails table...
    I want display the schemes available for the selected employee in the next table..The schemes are in another table named empschemes which has the empname and empschemes as column
    I have created a vo for empschemes table with bind variable 'scheme_bind'..I need to set the sessionscope variable '#{sessionScope.empname}" to the bind variable.
    Its urgent,..Pls do reply asap
    Thanks in advance
    Nasrin

    HI,
    You can use
    adf.context.sessionScope.get("YourSessionVariable")this code for assigning VO's bind variable value.write this code where you create bind variable and do not forget click on expression radio button.
    Rafat

  • How to use the bind variable in custom.pll

    Hi,
    How to use the bind variable in custom.pll.Its through error.
    any one gem me.
    very urgent.
    M.Soundrapandian.

    Hello,
    Please, ask this kind of questions in the e-business forum.
    Francois

  • How to pass the bind variable value to the sql statement of the LOV

    Hi,
    I am using Forms 10g builder.
    I have a text item which will be populated by a LOV when i press a button, but i have a bind variable in the SQL statement of the LOV. That bind variable should be replaced by a value which is derived from a radio group in the same data block.
    For Ex: ( )radio1 ( )radio2
    before i click on the push button, I'll select one of the radio button above,so my question is how to assign this radio group value to the bind variable in the sql statement in the LOV?
    Pl any hint is appreciated!
    Thanks
    Reddy

    The variable can be taken into account in the SELECT order contained in the Record Group used by the LOV.
    e.g. Select ... From ... Where column = :block.radio_group ...Francois

  • How to have the BIND variables value using the TKPROF utility.

    WE have a JAVA application and Oracle 9i database.We need to figure out what all select/update/insert sql staements are firing if i am doing one complete processing in my JAVA front application.
    Initally I have planned for using TKPROF utility after makeing AUTO_TRCE=TRUE in the database.But the problem is that all select/insert/update sql statements are using the BIND variables in the JAVA code and same is coming/printing on the trace file also.
    can we print out the BIND variables values also,while making the TRACE ON?
    eg: trace is generaitng the all insert statements like below.
    insert into TEST(Column1,Column2) values(:1,:2);
    I want to know the value of :1 and :2 bind variables.
    If you have any cluse about it please let me know.
    Mitesh Shah

    Thanks Guys,
    I got the BIND variable values in the TRACE file.Previously i was searching on the OUtputfile.
    I am pasting the same trce file format.Can you please verify it.Is i am looking the correct file and corect location.
    PARSING IN CURSOR #2 len=1571 dep=0 uid=66 oct=3 lid=66 tim=18446744071740803342 hv=1462188955 ad='123434f0'
    SELECT PARENTIDKEY,CONTRACTKEY,COMPANYKEY,BACKENDKEY,DATAREP,BANKHOLDINGID,BANKID,CARRIERPARTYID,PRODUCTID,ID,PREMIUMINDEXRATE,ILLUSTRATEDMATURITYLOW,ILLUSTRATEDMATURITYHIGH,SPECIALHANDLING,CARRIERCOMMCODE,MONEYTRANSFERTYPE,FIRSTBILLSKIPMONTH,CONTESTABILITYENDDATE,DEDUCTIONDATE,MARKETVALADJUSTIND,FREEAVAILABLEAMT,ADVANCINGREJECTEDIND,RATEDIND,OTHERINSUREDIND,ENDORSEMENTIND,BENEFICIARYIND,CASECONTROLNUMBERASSUMING,OWNERLEGALNAME,STAMPDUTY,COMMISSIONANNUALIZEDIND,NONSTDCOMMTAKEN,LAPSETAXABLEGAIN,GOVTALLOTMENTSUSPENSEACCTAMT,LASTNOGOODCHECKREASON,LASTNOGOODCHECKDATE,LASTCOIDATE,LASTDEDUCTEDEXPENSECHARGES,LASTDEDUCTEDCOICHARGES,STATEMENTBASIS,LASTNOTICETYPE,LASTNOTICEDATE,PAYMENTDUEDATE,LASTBANKCHANGEDATE,EFTENDDATE,BANKBRANCHNAME,BANKNAME,PAYMENTDRAFTDAY,BANKACCTTYPE,CREDITCARDTYPE,CREDITCARDEXPDATE,ACCTHOLDERNAME,ROUTINGNUMBER,ACCOUNTNUMBER,PAYMENTMETHOD,ANNUALPAYMENTAMT,PAYMENTAMT,PAYMENTMODE,LASTCOIANNIVDATE,BILLINGSTOPDATE,BILLEDTODATE,FINALPAYMENTDATE,GRACEPERIODENDDATE,PAIDTODATE,STATUSCHANGEDATE,REINSTATEMENTDATE,TERMDATE,ISSUEDATE,EFFDATE,DOWNLOADDATE,DURATION,POLFEE,POLICYVALUE,COMMISSIONROLLOVERPCT,COMMISSIONOPTIONSELECTED,REPLACEMENTTYPE,CUSIPNUM,CONVERTTOPRIVATEIND,PORTABILITYIND,REINSURANCEIND,BILLNUMBER,JURISDICTION,ISSUETYPE,ISSUENATION,STATUSREASON,PRIORPOLICYSTATUS,POLICYSTATUS,SHORTNAME,ADMINISTERINGCARRIERCODE,PLANNAME,FILEDFORMNUMBER,FORMNO,CARRIERCODE,PRODUCTCODE,PRODUCTTYPE,LINEOFBUSINESS,CERTIFICATENO,POLNUMBER,CARRIERADMINSYSTEM FROM "POLICY" WHERE PARENTIDKEY = :1 AND CONTRACTKEY = :2 AND COMPANYKEY = :3 AND BACKENDKEY = :4
    END OF STMT
    PARSE #2:c=0,e=1298,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=0,tim=18446744071740803336
    BINDS #2:
    bind 0: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
    bfp=082a5a9c bln=4000 avl=09 flg=05
    value="Holding_1"
    bind 1: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
    bfp=082a4af0 bln=4000 avl=10 flg=05
    value="DUL001138U"
    bind 2: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
    bfp=069bb890 bln=4000 avl=02 flg=05
    value="00"
    bind 3: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
    bfp=069ba8e4 bln=4000 avl=04 flg=05
    value="CLIF"
    **********************************************************************************

  • How to identify the bind variable peeking problem?

    How to identify the bind variable peeking problem whether my db hitting or not and how to resolve it?
    currently we are doing the dbms_stat of application schema's with gather auto option and i hope this option we take the histogram stats also. Is there any option to improve it and its highly transactions oltp env of 11g.

    What is your exact 4 digits Oracle version ?
    Bind peeking issues are supposed to be solved with adaptative cursor sharing in 11.1 and 11.2:
    11.1 http://download.oracle.com/docs/cd/B28359_01/server.111/b28274/optimops.htm#sthref919.
    11.2 http://download.oracle.com/docs/cd/E11882_01/server.112/e16638/optimops.htm#PFGRF94588
    which says also:
    >
    Adaptive cursor sharing is enabled for the database by default and cannot be disabled. Note that adaptive cursor sharing does not apply to SQL statements containing more than 14 bind variables.
    >
    Edited by: P. Forstmann on 10 nov. 2011 13:50

  • How to see values for bind variables in statspack output

    Hi all.
    Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
    PL/SQL Release 9.2.0.4.0 - Production
    CORE 9.2.0.3.0 Production
    TNS for Solaris: Version 9.2.0.4.0 - Production
    NLSRTL Version 9.2.0.4.0 - Production
    Running sprepsql.sql to get full sql and explain plan from hash value...
    SQL comes back with bind variables :1, :2, :3 etc.
    How can I find out what the values are for the bind variables so i can plug them in and run them in test db?
    Thanks for all your help.

    I don't have a trace file...
    I need to know what the values are and if there is anyway to see them from the output of the sprepsql...
    currently looks like:
    select
    r.status,
    NVL(r.required_date, to_date('12/31/3999', 'MM/DD/YYYY')),
    r.calc_qty,
    r.issued_qty,
    r.workorder_type,
    r.workorder_base_id,
    r.workorder_lot_id,
    r.workorder_split_id,
    r.workorder_sub_id,
    r.operation_seq_no,
    r.piece_no,
    r.warehouse_id,
    0,
    wbs_code
    from
    REQUIREMENT r
    where r.part_id = *:1*
    and r.workorder_type = 'W'
    and r.calc_qty > r.issued_qty
    and r.subord_wo_sub_id is null
    AND STATUS IN ('R', 'S','U','H','F')
    AND WAREHOUSE_ID = *:2*
    Thanks for your help.

  • How to SIMPLY use the %DIMENSION_TO_SET% variables into logic scripts

    hello,
    I'm using a prompt of type "COPYMOVE" or "COPYMOVEINPUT". In this type of prompt, there are 2 columns of dimension members list, one for defining the "source zone" and one for defining the "target zone" of logics.
    The left colum of the prompt (for source zone) feeds the variables %DIMENSION_SET% : %ACCOUNT_SET%, %ENTITY_SET%, %CATEGORY_SET%, etc...and these variables can be used in the logic scripts in *XDIM_MEMBERSET instructions for example.
    The right colum of the prompt feeds the variables %DIMENSION_TO_SET% : %ACCOUNT_TO_SET%, %ENTITY_TO_SET%, %CATEGORY_TO_SET%, etc...and I don't know how to SIMPLY use these variables in the logic scripts.
    I've found a tricky way to do that but I meet 2 problems :
    - it is complicated
    - the multi-info instruction (BEGININFO/ENDINFO) seems to be bugged as blank lines are added all the time in the code and sometimes I have to wait for minutes when I try to modifiy the package code through BPC for excel eData/modify package menu.
    So the question is how to SIMPLY get the %DIMENSION_TO_SET% variables into logic scripts and use them ? Thanks, R.
    Here is the tricky package code I use at this time (I build one function for each %DIMENSION_TO_SET% variable and I pass these functions to the logic) :
    PROMPT(COPYMOVE,,,,"ACCDETAIL,ACCOUNT,CATEGORY,DATASRC,ENTITY,TIME,YEARS")
    TASK(Execute formulas,USER,WS-WW\PlauchuR)
    TASK(Execute formulas,APPSET,US)
    TASK(Execute formulas,APP,SV)
    TASK(Execute formulas,SELECTION,D:\BPC\Data\WebFolders\US\SV\PrivatePublications\PlauchuR\TempFiles\FROM_1561_.TMP)
    TASK(Execute formulas,TOSELECTION,D:\BPC\Data\WebFolders\US\SV\PrivatePublications\PlauchuR\TempFiles\TO_1561_.TMP)
    BEGININFO(%FSS%)
    *FUNCTION TARGETACCDETAIL=%ACCDETAIL_TO_SET%
    *FUNCTION TARGETACCOUNT=%ACCOUNT_TO_SET%
    *FUNCTION TARGETCATEGORY=%CATEGORY_TO_SET%
    *FUNCTION TARGETDATASRC=%DATASRC_TO_SET%
    *FUNCTION TARGETENTITY=%ENTITY_TO_SET%
    *FUNCTION TARGETTIME=%TIME_TO_SET%
    *FUNCTION TARGETYEARS=%YEARS_TO_SET%
    ENDINFO
    TASK(Execute formulas,FORMULASCRIPT,%FSS%)
    TASK(Execute formulas,LOGICFILE,D:\BPC\Data\WebFolders\US\SV
    ..\AdminApp\SV\_TEST.Lgf)
    TASK(Execute formulas,RUNMODE,1)
    TASK(Execute formulas,LOGICMODE,1)
    Edited by: ALEXANDRE BEDIER on Jun 16, 2010 3:15 PM

    hello,
    finally I've discovered that there is no need of BEGININFO instruction.
    One can pass several functions to a logic with one FORMULASCRIPT task. The functions definitions have to be separated by instructions. See below :
    PROMPT(COPYMOVEINPUT,%FTARGETS%,,"select source and target zone for category and datasource.","ACCDETAIL,ACCOUNT,CATEGORY,DATASRC,ENTITY,TIME,YEARS")
    TASK(Execute formulas,FORMULASCRIPT,*FUNCTION TACCDETAIL=%ACCDETAIL_TO_SET% *FUNCTION TACCOUNT=%ACCOUNT_TO_SET% *FUNCTION TCATEGORY=%CATEGORY_TO_SET% *FUNCTION TDATASRC=%DATASRC_TO_SET% *FUNCTION TENTITY=%ENTITY_TO_SET% *FUNCTION TTIME=%TIME_TO_SET% *FUNCTION TYEARS=%YEARS_TO_SET%)
    TASK(Execute formulas,USER,%USER%)
    TASK(Execute formulas,APPSET,%APPSET%)
    TASK(Execute formulas,APP,%APP%)
    TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
    TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\_TEST.LGF)
    TASK(Execute formulas,RUNMODE,1)
    TASK(Execute formulas,LOGICMODE,1)
    Then one will be able to use the functions TACCDETAIL, TCATEGORY, TACCOUNT,... in the logic script.
    Edited by: ALEXANDRE BEDIER on Jun 24, 2010 10:31 AM
    Edited by: ALEXANDRE BEDIER on Jun 24, 2010 10:33 AM

  • How Can i retain the Shared Variable Values after PC rebooting

    Hi all,
    I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
    One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing. 
    As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
    I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
    I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
    Thanks and Regards,
    Mir

    Hi Blackperl,
    Thanks for the post and I hope your well. 
    What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after. 
    Surely a better method would be to log the data to a file during the reboot...
    I beleived the value read back
    will be the default value for the shared variable's data type.
    The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
    If you enable an initial value on a shared variable, when the variable
    engine comes back on-line it will default to this value. Setting a bad
    status alarm for the shared variable is also a good way of handling
    this type of event. Additionally, if you are using a LabVIEW Real-Time
    target such as Compact RIO or Compact FieldPoint, it is appropriate to
    consider hosting the shared variable engine on the real-time target.
    These devices have watch-dog capabilities and are typically the
    hardware controlling the critical pieces of an application. Most
    Windows or PC-based targets do not have these fail-safes.
    I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
    Please let me know what you think,
    Kind Regards,
    James.
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • How do I prepopulate a bind variable from a session variable?

    Hello. I have a scenario where I have a customer Id I need to set as the bind variable and then execute the query before the page comes up. How do I do this? Here's what I've tried (and why it didn't work)
    - I tried using the 'ExecuteWithParameters' method from the view object as a method in the task flow. I would then pass in the session variable as a parameter. For some reason it can never find the executewithparameters method on the view object. I'm guessing because it wants to go through the application module
    Next ...
    - I created a client method in the AM call setCust Id with the following code:
    public void setUserNameBind(String userName)
    System.out.println("Set param:" + userName);
    getFndUserVVO1().setNamedWhereClauseParam("UserNameBind", userName);
    getFndUserVVO1().executeQuery();
    This worked. However when I ran the debug it instantiates the VO again but with a NULL for the bind parameter. So on the screen it always has the NULL VO.
    Finally ...
    - I tried to put the method in the binding for the page as a method call. However, the method never got called before the page came up.
    This seems like a pretty simple problem. Any ideas?
    Thanks!

    Hi,
    1 - create a bind variable and add it to the ViewObject query
    2 - drag the ExecuteWithParams operation under the ViewObject (DataControl Palette) to the page
    3 - this is created as a button. In the source editor (NOT THE VISUAL EDITOR), delete the button so the binding remains
    4 - for the bind variable in the ExecutWeithParams, set its value to #{sessionScope.attribute_name}
    5 - in the bindings file, under executables, create an "invokeAction" entry and point it to the executeWithParams operation
    Frank

  • How can I know the name of the file that the user has currently open ?

    Hello
    I'm developing a module for x3dv.
    http://hiperia3d.blogspot.com/search/label/X3DV%20Module%20For%20Netbeans
    I am going to add a button to open the files when I click it.
    I just need to know how can I know the name of the file that the user has currently open in the editor. What variable holds it in Netbeans?
    Thank you
    Jordi

    If you are using the JFileChooser to open the document, I would create another class with this included:
    //initiate class variables
    private File f;
    //create JFileChooser
    JFileChooser fc = new JFileChooser();
    fc.setMultiSelectionEnabled(false);
    fc.setFileSelectionMode(JFileChooser.FILES_ONLY)
    //set the chooser to initialise File f with the file selected
    int status = fc.showOpenDialog(null);
    if (status == JFileChooser.APPROVE_OPTION)
         f = fc.getSelectedFile();
    public File getFile()
         return f;
    }

  • How can i know the no of servlets

    how can i know the no of servlets present in single application

    you webapp (servlet) can create a static variable. when a request has been made, you increment this number...provides a request parameter (http param) that will return this count number.

  • How can I show the Text variable in WAD 7.0

    Hi All,
    How I can show the text variable in WAD 7.0??
    Kinsly suggest me..
    Re

    Hi,
    As far as i know u do not need any special web item to display the text variable as such. have a analysis item in u r WAD and assign query to the same. Ur variables appear as per the configuration u have made in the query designer. WAD has nothing to do.
    Regards

Maybe you are looking for