How do i label columns in excel

I need to know what code do i use in labview to label the columns in excel when the data is opened up in excel. Thank You
Solved!
Go to Solution.
Attachments:
Wii Balance Board-16.vi ‏1358 KB

This is what it would look like:
Ignore the fact that I compressed the code in the loop. The important part is that you write the first row once before the loop and the rest of the data inside the loop (with the append input as T).
In general, this is very important to understand on your own if you expect to do anything in LV. I would strongly suggest you follow those tutorials and try learning from other places as well.
Try to take over the world!

Similar Messages

  • How to freeze the columns in excel exported from SSRS report??

    We have created a report for our client. The client wants the report in excel format. As there are nearly about 30,000 rows in the excel. Client wants us to freeze the column header names in the excel so that even after scrolling down they
    will be able to see the column names.
    can anybody have idea how to achieve this in SSRS?

    Hi Shard,
    Thanks for your post, You can achive your requiremets by using the below logic. hope this will help you.
    Steps to achieve it
    1. Select the tabix and click on Tablix properties.
    2. In the General tab under Column Headers section you can see "Keep header visible while scrolling" checkbox, check it.
    3. Now the header row will be remain fixed in the report.
    OR
    1.    In the grouping pane, make sure to turn on advanced mode (click on the small black down arrow on the far right of the grouping pane) 
    2.  Select the corresponding (Static) item in the row group hierarchy
    3.  In the properties grid, set RepeatOnNewPage to true
    4. KeepwithGroup to After
    OR
    1)Freeze the header of all columns[ Freezing table header ] : To do select static member of table header row from  row groups [ Advanced Mode ] and set  FixedData to true
    2) Freeze the initial 2 columns : To do select static member of columns in column group and set fixedData to true .
    How do you freeze the tablix header row in an Excel export file in SSRS 2008
    Suhas Kudekar
    Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
    My Blog
    Follow @SuhasKudekar

  • How do I autosize columns in Excel using ActiveX in Labview

    I found the ExcelExamples.llb but nothing that describes this. My data is sometimes bigger than the default column width.
    thanks

    How about using a macro to run the column autosize function?
    I cheated, and recorded an autosize operation on a column, and then looked at the vb code behind the macro...
    Columns("D").EntireColumn.AutoFit
    should do the trick.
    In the excelexamples.llb, they seem to use macros to perform other functions, so maybe this is a way to achieve the autosize function that you require.
    Hope this helps...
    JB

  • Alignment of Columns in Excel when sent as an attachement

    Hi,
    I am using below code to send the output of ALV via email as an attachment.
    data : lv_variant type sy-slset value 'VARIANT',
             lt_list   type table of abaplist,
             lt_0167_body type standard table of soli,
             ls_body_raw type soli,
             lt_txt type soli_tab.
    data:   ls_string type text2048,
              lt_objbin type soli_tab,"Attachment of EMail
              lt_objbinx type solix_tab,"Attachment of EMail
              lv_dlist type so_obj_nam,
              lv_bdate type char10,
              lv_edate type char10,
              lv_title type char40.
    submit ztest using selection-set lv_variant exporting list to memory and return.
    call function 'LIST_FROM_MEMORY'
      tables
        listobject = lt_list "Binary data
      exceptions
        not_found  = 1.
    call function 'LIST_TO_TXT'
      tables
        listtxt            = lt_txt
        listobject         = lt_list
      exceptions
        empty_list         = 1
        list_index_invalid = 2
        others             = 3.
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    move 'test' to ls_body_raw.
    append ls_body_raw to lt_0167_body.
    lt_0167_body[] = lt_0167_body[].
    data :
        l_hex type solix,
        conv type ref to cl_abap_conv_out_ce,
        l_buffer type xstring,
        l_hexa(510) type x.
      loop at lt_txt   into ls_string.
        conv = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' endian = 'B').
        call method conv->write( data = ls_string ).
        l_buffer = conv->get_buffer( ).
        move l_buffer to l_hexa.
        move l_hexa to l_hex-line.
        append l_hex to lt_objbinx.
      endloop.
    call method ztest=>send_mail
      exporting
        it_errormessages     = lt_0167_body
        iv_type              = 'RAW'
        iv_dist_list         = 'DLIST' "distribution list
        iv_subject           =  'test'
        lv_attachment_type   = 'XLS'
        lv_attachment        = lt_objbinx
        lv_attachment_name   = 'Test'
      exceptions
        bcs_fault            = 1
        tvarv_not_maintained = 2
        others               = 3
    here my custom method send_mail is working properly it is sending whatever is coming in lt_objbinx as  excel, only problem in the excel columns and column values are not aligned properly.
    please suggest how can i align columns inside excel using abap code, send mail is actaully using cl_bcs and related classes for sending e-mail.
    Thanks,
    kranthi.

    Hi change the below sample as per your requirement.
    <unreadable code removed by moderator>
    Regards
    chitra
    Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve readable formatting.
    Edited by: Thomas Zloch on Nov 15, 2011 1:03 PM

  • How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?

    How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?
    For example: I have formulas in columns D and F that relate to columns C to CU
    If I want to move one column from one position to another (say S to T), the formula loses the colums that was moved, i.e. it doesn't recognize it has moved, rather sees it as deleted...  How can I do this without distorting the formula?

    Thanks for the feedback.
    If I often urge askers to look at the available resources, it's because  a large range of questions asked in the forums are already answered in these documents.
    As they are PDFs, they are easy to search in.
    CAUTION
    Download them while they are available.
    Given what is delivered with iBooks Author, I'm afraid that we will not get such easy to use documents.
    Searching infos in the  iBooks Author documentation available on line is awfully cumbersome and a lot of embedded links are wrongly flagged this way. In the Help files they aren't links but underlined strings.
    It seems that the tool used to generate the web pages was wrongly configured.
    Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • How do I maintain column formatting when converting from PDF to Excel?

    How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

    Sara,
    Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to  convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing. 
    Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

  • How to put 2nd column into 1st column in excel

    Hello,
    I have a question how to put 2nd column into 1st column in excel. Thank you.
    Solved!
    Go to Solution.

    Why the 1 iteration for loops?
    Why the two Index Arrays?  It is just trying to fix the problem created by the For Loops on the original 1-D arrays.
    Both of those things are creating 2-D arrays that are complicating things and can be eliminated.
    You can take your 2 1-D arrays, use Build Array and right click to set "Concatenate Inputs".
    If you do have a 2-D array, you can use Reshape Array to make it a 1 column by N row 2-D array.

  • How to hide multiple columns in multicolumn listbox like as an excel sheet?

    Hello All,
    I have large amount of data that is to be displayed on multicolumn listbox. After displaying that, I want to hide or delete some columns from listbox in runtime.
    I know how to hide one column using active cell property node. But I want to hide multiple columns. I am using LabVIEW 2011. 
    Thanks in advance.
    Thanks & Regards,
    Manisha

    Thank you so much. 
    But I have total 12 columns and I don't want to delete columns serially. I want to delete inbetween columns, like in attached VI I want to delete column A & D only. 
    And in this user have to select it from frontpanel. I want this is to be done as in excel, like we select the entire column and either we hide it or delete it. One more thing I want to clear the data in multicolumn when I next time open my VI. How to do that?
    I hope am clear in explaining my problem.
    Thanks & Regards,
    Manisha
    Attachments:
    Delete Column.vi ‏10 KB

  • How to read and write data in to a specified range of cells(it include multiple row & columns) in excel

    How to read and write data in to a specified range of cells(it include multiple row & columns) in excel

    CVI Comes with a sample project that explains how to read/write to a Excel file: choose "Explore examples..." in CVI welcome page and navigate to <cviSampleDir>\activex\excel folder where you can load excel2000dem.prj.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to get Number of Column in Excel file

    Hi All,
                   My requirment is to get Number of Column in Excel file which i want to upload,
      so please suggest if there is any possible way to get this functionality.
    Thanks
    Anirudh

    Use FM "ALSM_EXCEL_TO_INTERNAL_TABLE".
    Adjust the values of i_begin_col & i_end_col parameters in this FM.
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          FILENAME                      =
          I_BEGIN_COL                   =
          I_BEGIN_ROW                   =
          I_END_COL                     =
          I_END_ROW                     =
        TABLES
          INTERN                        =
      EXCEPTIONS
        INCONSISTENT_PARAMETERS       = 1
        UPLOAD_OLE                    = 2
        OTHERS                        = 3
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Regards,
    BBR.

  • How to import decimal values from Excel to nvarchar column correctly?

    I have SQL Server 2012 Integration Services. I have Excel Source and OLE DB Destination.
    I have 2 Excels, both having exactly same columns and their destination table is same.
    I have MarketShare column in Excel. I have also MarketShare column nvarchar(100) in Database. I should not make any change in Excel file or DB table.
    MarketShare value can be numerical like "0.50" or "25.4" or text like "Not Available" or text like "Not Available Yet" 
    My problem is that numerical values are stored to DB like 0.500000000000003, 25.399999999999999. Text as stored correctly.
    What should I do so that digits of numerical values are stored corretly to nvarchar(100) column?
    Kenny_I

    Hi Kenny_I,
    I am unable to reproduce the issue in my test environment no matter it is a XLS file or a XLSX file. After adding extended property “IMEX=1” to the ConnectionString of the Excel Connection Manager, the connection string should be as follows:
    For XLS file:
    Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\Temp\Test.xls;Extended Properties="EXCEL 8.0;HDR=YES;IMEX=1";
    For XLSX file:
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Temp\Test.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;IMEX=1";
    If we open the Advanced Editor for the Excel Source, and expand the Output Columns node,  the data type of the MarketShare column should be to DT_WSTR with 255 length. Because the length of the destination column in SQL Server table is 100,
    we need to change the length of the output column from 255 to 100. There may be a warning about data truncation thrown by the Excel Source but we can ignore this warning.
    If the above steps doesn’t work, please post more information about this package for further investigation. Please post the data type of the Output Column MarketShare of the Excel Source as well as the Input Column MarketShare of the OLE DB Destination.
    Besides, click the path between the Excel Source and OLE DB Destination and click “Enable Data Viewer”. Then, run the package to check whether the data displayed in the Data Viewer are the same as the source data (like 0.50) or the same as the data inserted
    to the SQL Server table (like 0.500000000000003).
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • How to print all columns in one page

    Hi,
    Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
    Can anyone explain me  how to print ALL COLUMNS IN ONE PAGE  .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
    Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
    Edited by: kotha123 on Oct 11, 2010 5:58 PM

    Hi,
    Your best bet is to use a workbook template or else Excel to pdf option...Thanks

  • How to read the data in excel sheet

    Dear sir,
    How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
    Cell A       Cell B
       A           Apple 
       B           Ball
       C           Cat
       D           Doll
    when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on.. 

    Hi, 
    I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached. 
    Trust this would help you solve the issue. 
    Regards, 
    Sagar G Yadav | Application Engineer | National Instruments
    Attachments:
    read_from_excel.vi ‏10 KB
    Book1.txt ‏1 KB

  • How to use the Columns Hidden | space in the bottom of af:panelCollection?

    Hi,experts,
    In jdev 11.1.2.3,
    I can see a row of Columns Hidden | Columns Frozen in the bottom of component af:panelCollection - pc1 which have an af:table - t1 component inside in designer view,
    and can see there is a blank row space only with "|" inside when the page is running.
    Now I want to use this blank row space such as to display row numbers for the table, so I set the property for the panelColletion as following source code:
    ==========================
    <af:panelCollection id="pc1" inlineStyle="width:1250px; height:500px;">
    <f:facet name="menus"/>
    <f:facet name="toolbar"/>
    <f:facet name="statusbar">
    <af:group id="g4"/>
    </f:facet>
    <af:table value="#{bindings.TView1.collectionModel}" var="row"
    rows="#{bindings.TView1.rangeSize}"
    emptyText="#{bindings.TView1.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.TView1.rangeSize}" rowBandingInterval="1"
    filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
    queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}" filterVisible="false"
    varStatus="vs"
    selectedRowKeys="#{bindings.TView1.collectionModel.selectedRow}"
    selectionListener="#{bindings.TView1.collectionModel.makeCurrent}"
    rowSelection="single" id="t1" inlineStyle="font-size:xx-large; font-weight:bolder;">
    <af:column sortProperty="#{bindings.TView1.hints.GoodsStatus3.name}" filterable="true"
    sortable="true"
    headerText="#{bindings.TView1.hints.GoodsStatus3.label}"
    id="c42">
    <af:outputText value="#{row.GoodsStatus3}" id="ot33"/>
    </af:column>
    <f:facet name="footer">
    <af:group id="g3">
    *<af:outputText value="RowsNumber：" id="ot44"/>*
    *<af:outputText value="#{bindings.TView1Iterator.estimatedRowCount}"*
    id="ot43" partialTriggers="::pc1:t1"/>
    </af:group>
    </f:facet><f:facet name="detailStamp"/>
    </af:table>
    </af:panelCollection>
    =====================
    but when run the page there is no display for the row number, instead on the bottom of the table, there is only a blank row with "|" inside.
    How to use the Columns Hidden | Columns Frozen space in the bottom of component af:panelCollection ?
    Thanks!

    Hi, Arun
    It works.
    As in my use case, can draw an af:toolbar component into statusbar of Panel Collection facets in Structure view.
    There is still a small issue:
    cannot see the Columns Hidden|Columns Frozen component in the Structure view,
    and if drop more than one af:toolbar into statusbar, the sencond one will fall/wrap into second row, even though there is enough space on the first row (to occupy a second row in statusbar will be a waste of space), and cannot see how to adjust.
    Thank you very much!
    bao

  • How to get summary columns in delimited text file

    How to get summary columns in delimited text file
    I am trying to generate a delimited text file output with delimited_hdr = no.The report is a Group above report with summary columns at the bottom.In the text file the headers are not getting repeated & thats ok.The problem is the summary data is getting repeated for each row of data.Is there a way where i will get all the data & summary data will get displayed only once.I have to import the delimited text file in excel spreadsheet.

    Sorry there were a typos :
    When I used desformat=DELIMITEDDATA with desttype=FILE, I get error "unknown printer driver DELIMITEDDATA". When you look for help, DELIMITED is not even listed as one of the values for DESTFORMAT. But if you scroll down and look for DELIMITER it says , this works only in conjuction with DESTFORMAT=DELIMITED !!!!!!??!! This is in 9i.
    Has this thing worked for anybody ? Can anyone please tell if they were able to suppress the sumary columns or the parent columns of a master-detail data for that matter ?

Maybe you are looking for