How to read the data in excel sheet
Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..
Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi 10 KB
Book1.txt 1 KB
Similar Messages
-
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
How to read the data from excel file and store into the table?
Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
ThanksHi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu. -
Hi all, I'm new to using the labview, and I have some trouble doing my project using the labview software.
I have been trying to use the spectrum analyzer (Anritsu MS2661C) which connect to computer using the GPIB connection.
I have got the instrument driver which can write and control the instrument using Labview 2010.
and my Question is how do read the data or result from the spectrum analyzer and send it to the microsoft excel?
Do I need to use other software or programming to do this step?
If anyone know how is this done, please let me know.
Regards,
EryHi ery,
In order to send data that you have read in from an instrument to Excel, the most convenient way to do this would be to use our Report Generation Toolkit. The Report Generation Toolkit is a very useful tool that allows you to interface to Microsoft Office software from LabVIEW, including Word and Excel. I am not sure if you are familiar with this, but I have attached a link that explains more about the Report Generation Toolkit below.
Another way would be to use the Write To Spreadsheet File VI. While this will store your data to a spreadsheet data file, it will not allow you to programmatically perform any Excel formatting like the Report Generation Toolkit offers. I have also attached a link to some information on the Write To Spreadsheet VI below.
Also, be sure to check out the Example Finder in LabVIEW for a number of examples on how to write data to a spreadsheet file. From LabVIEW, you can go to Help»Find Examples to launch the Example Finder. From there, you can search for "spreadsheet," which should populate examples for use in different applications. I hope this helps, ery. Please let me know if you have any further questions about these!
NI LabVIEW Report Generation Toolkit for Microsoft Office
Write To Spreadsheet File VI
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support -
Getting short dumps while reading bulky data from excel sheet
Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone). -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
How to upload the data from excel(3 tabs) file to sap environment
Hi all,
This is Mahesh.
how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.Hi,
The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
You can find a solution for 2 worksheets in this post :
TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
I think you can easily modify it to handle any number of worksheets.
Hope it helps !
Best regards,
Guillaume -
How to take the data from excel list to sap r/3(with time interval)
hi experts,
how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_path
i_begin_col = '1'
i_begin_row = '2'
i_end_col = '2'
i_end_row = '500'
giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva -
Update the data into excel sheet .
Hi Friends..
If I run the program it want to store the data into excel sheet(first few lines) , if i run the program again I want to store the next result in the same excel sheet after that data(first time data).
is it any solution available to store the data in the same excel sheet again again in different row of that excel sheet.
Thanks
GowrishankarHi,
I am not sure which FM u r using for downloading. The FM GUI_DOWNLOAD will work for your requirement. Set the parameter Append to value 'A'. Every time it will append the data to ur file.
Check below code.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = l_file
FILETYPE = 'ASC'
APPEND = 'A'
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = i_tab
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Vinod. -
Cannot retrieve the data from excel sheet
hi all ...
i am trying to retrieve the data from excel sheet and at the same time i am inserting the data into mysql database.
code is as follows
try{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); conn1=DriverManager.getConnection("jdbc:odbc:"+estr,"",""); Class.forName("com.mysql.jdbc.Driver"); conn = DriverManager.getConnection("jdbc:mysql://localhost:3306/"+ t_dsn ,"root","manager"); sql="select * from student_info"; srch2 = conn.prepareStatement(sql); rs1 = srch2.executeQuery(); String query = "select * from ["+einput+"$]"; String query1= "select count(*) from ["+einput+"$]"; st = conn1.createStatement(); rs = st.executeQuery(query); ResultSetMetaData rsmd = rs.getMetaData(); c = rsmd.getColumnCount();//gets the column count rs1 = st.executeQuery(query1); while (rs1.next()) //loop to get no. of rows { r = rs1.getInt(1); } rs = st.executeQuery(query); for(i=1;i<=r;i++){ rs.next(); for(j=1;j==c;j++) { a = rs.getString(j); b= rs.getString(j); d = rs.getString(j); } rs1.next(); PreparedStatement ps2 = conn.prepareStatement("insert into materials_out values(?,?,?)"); ps2.setString(1,a); ps2.setString(2,b); ps2.setString(3,d); ps2.executeUpdate(); } }catch(Exception e){ e.printStackTrace(); }
but it is showing error as :
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name too long
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3073)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:323)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at Outward_register.jButton2ActionPerformed(Outward_register.java:368)
at Outward_register.access$400(Outward_register.java:23)
at Outward_register$5.actionPerformed(Outward_register.java:312)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6038)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
at java.awt.Component.processEvent(Component.java:5803)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4410)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
at java.awt.Container.dispatchEventImpl(Container.java:2102)
at java.awt.Window.dispatchEventImpl(Window.java:2429)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
please help me ...please help me ... The question has nothing to do with 'getting' data from excel and certainly not with putting it into MySQL.
The stack trace specifically tells you that your connection string is wrong.
It also tells you which connection string is wrong.
Which you can use to determine specifically which one is wrong. And which you did not provide that info to us. -
Reading the data from excel file which is in application server.
Hi,
Iam trying to read the data from excel file which is in application server.
I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
I tried just reading using open data set and read data set it is giving junk characters.
Please suggest me if you have any solution.
Best Regards,
Brahma ReddyHi Narendra,
Please see the below code I have written
OPEN DATASET pa_sfile for INPUT in text mode ENCODING DEFAULT MESSAGE wf_mess.
CHECK sy-subrc = 0.
DO.
READ DATASET pa_sfile INTO wf_string.
IF sy-subrc <> 0.
EXIT.
else.
split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
wa_upload-field34 wa_upload-field35 wa_upload-field36 .
wa_upload-field1 = wf_field1.
wa_upload-field2 = wf_field2.
append wa_upload to int_upload.
clear wa_upload.
ENDIF.
ENDDO.
CLOSE DATASET pa_sfile.
Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
Please suggest me any other way.
Thanks for your help,
Brahma Reddy -
How to read the date and time information of a file by labview
how to read the date and time information of a file by labview? for example, created time and modified time.
Solved!
Go to Solution.if you need to know the last modification date of file:-
"Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
Thanks as kudos only -
How to export the data to excel in OAF Page - Urgent
Hi All,
I have a developed a page wich dispaly the records based on some condition.
The Page has two regions.
1.RowLayout Region
2.Table Region
Both the regions are getting the data from two diffrent VOs.
In this case how to export the data to excel as the export button will not work if the page uses more than one VO(I think).
Please help me.
Thanks,
Srinivas
Edited by: SrinivasChanda on Oct 7, 2009 10:07 AMHi Gaurav,
Yes you are rite.When i tried exporting the data(which is coming from two different VOs altogether),i got only one region's data and then got error.
Please note: Two regions(RowLayout,Table) are getting data from two different VOs
below is one of the region(row layout) data:
Hierarchy Learning Certification Status Learning Certification Supervisor
Direct Reports Passed Only All Michael Swinnerton
below is the error:
<div CLASS="errorText">
<html lang="en-US">
<head>
<script>
function ignoreWarnAboutChanges(url)
document.location.href = url;
</script>
<title>Error Page</title>
<link rel="stylesheet" charset="UTF-8" type="text/css" href="/OA_HTML/cabo/styles/blaf.css">
<META name="fwk-error" content="Error occured while processing the request">
<META name="fwk-error-detail" content="oracle.apps.fnd.framework.OAException: Application: FND Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.io.IOException: Stream closed;
" at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)"
" at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:865)"
" at OAErrorPage.jspService(OAErrorPage.jsp:34)"
" at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"
" at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"
" at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"
" at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"
" at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"
" at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"
" at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:119)"
" at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:547)"
" at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:518)"
" at OAExport.jspService(OAExport.jsp:122)"
" at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"
" at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"
" at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"
" at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"
" at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"
" at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"
" at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)"
" at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)"
" at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)"
" at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)"
" at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)"
" at java.lang.Thread.run(Thread.java:534)"
## Detail 0 ##
java.io.IOException: Stream closed
" at java.io.BufferedWriter.ensureOpen(BufferedWriter.java:98)"
" at java.io.BufferedWriter.write(BufferedWriter.java:197)"
" at OAExport.jspService(OAExport.jsp:107)"
" at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"
" at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"
" at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"
" at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"
" at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"
" at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"
" at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)"
" at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)"
" at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)"
" at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)"
" at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)"
" at java.lang.Thread.run(Thread.java:534)"
java.io.IOException: Stream closed
" at java.io.BufferedWriter.ensureOpen(BufferedWriter.java:98)"
" at java.io.BufferedWriter.write(BufferedWriter.java:197)"
" at OAExport.jspService(OAExport.jsp:107)"
" at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"
" at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"
" at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"
" at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"
" at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"
" at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"
" at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)"
" at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)"
" at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)"
" at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)"
" at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)"
" at java.lang.Thread.run(Thread.java:534)"
">
</head>
<body>
<table width=100%"" border=""0"" cellspacing=""0"" cellpadding=""0"">"
<tr> <td><img src="/OA_MEDIA/FNDSSCORP.gif" alt=""> </td></tr>
<tr> <td> </td>
<td> <a href= /OA_HTML/OALogout.jsp>Logout </a></td>
</tr>
<tr> <td width="100%" nowrap class="OraBGColorDark" > </td> </tr>
</table>
<p>
<center>
<table width="95%" border="0" cellspacing="0" class="OraBGAccentDark" cellpadding="0">
<tr> <td> </td> </tr>
<!-- <tr> <td class="OraErrorHeader"> <img src=/OA_HTML/cabo/images/errorl.gif> Error Page </td> </tr> -->
<tr> <td class="OraErrorHeader"> <center> Error Page </center> </td> </tr>
<tr> <td colspan=2 class="OraBGColorDark"> </td> </tr>
<tr> <td> </td> </tr>
<tr> <td colspan=2 class="OraErrorText" >You have encountered an unexpected error. Please
contact the System Administrator for assistance. </td> </tr>
<tr> <td colspan=2 class="OraErrorText"> Click <a href=javascript:ignoreWarnAboutChanges("/OA_HTML/OAErrorDetailPage.jsp")> here </a> for exception details.
</td> </tr>
</table>
</center>
</div>
</body>
</html>
Please help me to solve this issue.
Thanks,
Srinivas
Maybe you are looking for
-
How to use dynamic file as welcome-file-list in web.xml
I have configured my web.xml file as this, <web-app> <context-param> <param-name>javax.faces.DEFAULT_SUFFIX</param-name> <param-value>.xhtml</param-value> </context-param> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.face
-
Can someone help me? My iPad stopped discovering my HP AirPrint printer. So I cant print at all with no printer to slect. Both printer and iPad are on same WiFi network and connected.
-
How to create report with Fixed Labels and Dynamic Columns
I have static column labels in left side of report and field in 3 columns coming dynamically from 3 different command queries. Please let me know how to create it..Following is the sample data for report.
-
How to check Navigational attribute in Planing book?
we have 5 characteristics and 1 navigational attribute in our MPOS. after loading data into PA and checking planning book, I do not see navigational attribute in the planninng book selection window. on the left side object selection and drill down my
-
Hi Everyone Can anybody throw some light on the various time constraints used in the HR-ABAP and their relation to the infotypes. Also specify if their some Transaction code from where we can get to know about the value's of the time constraints. And