How do I listen to 8443 for https on localhost?

Neither of these two URLs works for me:
https://localhost:8443/
https://localhost:8443/examples/servlets/index.html
How do I make sure my machine listens to https on 8443?
Calling netstat -a at the command line doesn't say anything about port 8443 as far as I can tell.

Btw, I went into my server.xml file and followed these instructions:
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
instructions):
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
Then I uncommented this:
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
     acceptCount="100" debug="0" scheme="https" secure="true"
useURIValidationHack="false" disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
clientAuth="false" protocol="TLS" />
</Connector>
However, it's still not working!

Similar Messages

  • How to set up site CORRECTLY for HTTPS?

    hi,
    I have a site up and running in Developement and Test servers using HTTP. I also got it up and running with HTTPS. However this doesnt seem to work all the time. Sometimes the portal seems to creaete the URL without the HTTPS causing it to go to the Home page.
    Is there any configuration files or articles that describe all the steps that need to be done to get the portal ready for HTTPS?
    One are I have a probloem is the Visitor Tools when I apply theme, it redirects to HTTP instead of HTTPS and this causes the Customize Portal to disappear and the Home page to be displayed.
    THANKS in advance.
    charlene

    Maybe this can help?
    http://www.cisco.com/en/US/docs/routers/access/500/520/software/configuration/guide/520scg_vpn_gre.html

  • How to get the error code for http request

    I have to implement the if..elso loop depending on the error code return as below.
    String host="127.0.0.2"
    if the this servers is not found or itis down it should return error code, based on that I have to change the host value to some other server like "127.0.0.4" , Can you let me know how it can be implemented? Please help me.

    Here is my requirement...
    say.. if client hit " http:\\ 172.0.0.3: 1000/index.jsp" and if the server 172.0.0.3 is not available i will set the server host to some other and request will redirect accoringly like " http:\\ 172.0.0.4: 1000/index.jsp"

  • I have the new Air Port Extreeme model A1521 and I need to set up port forwarding for HTTP. HTTP is not on the list in the set up. Does anyone know if any of those choices work for HTTP?

    I am on a Windows 7 Ultimate PC and right now there is no Airport utility for setting up the new Apple Extreme so you have to do it on your iPad or iPhone. Does anyone know how to set up port forwarding for HTTP to get to DVR security cameras? There is nothing in the list that indicates HTTP port forwarding.

    Thanks for your reply Tesserax as I did figure this out on my own. It took a bit because all of the options are not clear what they are for like the previous Airport Extreme and Apple does not support or guarantee that port forwarding will work for you application nor did any of the Apple support persons I spoke too have any knowledge for this feature. You also have to fill in the public if you are viewing through someone else's Wi-Fi or on your cell phone carrier network. This new Airport Extreme is a bit different since you cannot use the Airport utility on a PC like the older model and if anyone else is reading this they should be aware that if you do not have an Apple computer, iPhone or iPad and I'm not sure if some of the other network enabled devices like iPod Touch that you must use that can do it, there is no Airport utility for the PC and you would be wasting your money or have to take it back and get another brand wireless router to use if you do not own any of the above mentioned Apple products.

  • How to replace self-signed certificate for enterprise manager console

    Does anyone know how to change self-signed certificate for https access to Enterprise Manager console, which is issued during installation of Oracle 11g?

    Well, this might not be much help, but for 10g, on AIX, docID 1171558.1 describes how to create a new certificate.
    Not sure how relevant it will be for 11g, sorry :(

  • Making PI listen on a new/different port for http

    Hi,
    I have a requirement where we are exposing PI to the internet for some webservice calls. We have firewalls/dmz/gateway etc in the picture.
    One part of the problem is that, for requests coming into PI, we need PI to listen on a different port for https, say 446.
    How do I go about setting this up in PI?
    Thanks,
    Harsh
    PI 7.1 EHP1

    Changing of the web port for https can be done in the general server/port configuration of your PI System.
    You can look at the port configuration with transaction SMICM on your ABAP Stack .
    http://help.sap.com/saphelp_nw70/helpdata/en/ac/8f813a34872769e10000000a114084/frameset.htm
    This is a starting point for reading about the topic. The settings itself can be done, for example, with RZ11

  • How do i get that bar to appear on the screen for http and web pages?

    How do i get that bar to appear on top of the screen for http and web pages?

    Yes im using safari version  5.1.2 (6534.52.7)  I have tried clicking show toolbar  from the view menu but i still can't see it.  It's the bar where you type in a website link or http:// that I can find - any other suggestions much appreciated

  • How to start listener in sql developer for remote debug

    how to start listener in sql developer for remote debug ? Since the new version 1.1.0.23 is different with the old version for remote debug, I don't know how to start the listener on the new version for remote debug.
    even follow the user guide below and not work . Experts on sql developer please help me with this.
    Remote Debugging
    To debug a procedure or function for a connection where the database is on a different host than the one on which you are
    running SQL Developer, you can perform remote debugging.
    Remote debugging involves many of the steps as for local debugging; however, do the
    following before you start the remote debugging: Use an Oracle client such as SQL*Plus to issue the debugger connection command. Whatever
    client you use, make sure that the session which issues the debugger connection commands is the same session which executes your PL/SQL
    program containing the breakpoints.
    For example, if the name of the remote system is remote1, use the following SQL*Plus command to open a
    TCP/IP connection to that system and the port for the JDWP session:
    EXEC DBMS_DEBUG_JDWP.CONNECT_TCP('remote1', '4000'); The first parameter
    is the IP address or host name of the remote system, and the second parameter is the port number on that remote system on which the debugger
    is listening.
    Right-click the connection for the remote database, select Remote Debug, and complete the information in the Debugger - Attach
    to JPDA dialog box. Then, follow the steps that you would for local debugging (for example, see Debugging a PL/SQL Procedure).
    Debugger - Attach to JPDA This dialog box is displayed when you right-click a database connection name and select Remote Debug.
    Use this
    dialog box if you are using the Sun Microsystem's Java Platform Debugger Architecture (JPDA) and you would like the debugger to listen so
    that a debuggee can attach to the debugger.
    For more information about remote debugging, see Remote Debugging.
    Host: Name or IP address of
    the remote host on which SQL Developer should listen for the database to connect.
    Port: Listening port number on the remote host. You can
    choose any valid port number that is not in use by another process.
    Timeout: The number of seconds that SQL Developer will wait for the
    remote database to make a debugging connection. Don't Show Dialog Box Before Connecting: If this option is checked, this dialog box will not
    be displayed before future connections for remote debugging

    You're not the only one:
    Not able to start remote debug listener
    Re: remote debug question at version 1.1.0.23 64

  • How can i get the port used for https

    Hi All,
    does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
    i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
    we have following settings:
    server port: ??
    Web Protocol: https://
    Thanks for suggestions!
    Karol

    Hi Karol,
    by navigating to:
    Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
    you can change the Webprotocol to http:// and set server port to 50000 (default port).
    To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
    http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
    Hope this helps,
    Robert

  • How to set more detail log level for http

    Hi,
    With Java Enterprise System 2003 I want to see when a user login to the Messenger Express in the http log. How could I set a log level so I can see this?
    I do not know the the default log level for http and I would like to set a log level that show me more information
    could this be the command?
    configutil -o logfile.http.loglevel -v level Information

    configutil -o logfile.http.loglevel -v Information
    would be the correct command to set the log level to "information".
    Other valid levels include, "debug", "notice" (this is the default), "warning".
    You have t restart the webmail daemon to make this take effect.
    stop-msg http; start-msg http

  • How set  UserName and Password for HTTP Basic Authentication for a servlet

    Hi..
    How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server?
    Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml).
    But i dont know how do it in JBOSS..
    I am using Netbeans and Eclipse IDEs.. Can we do it by using them also!?
    Thank u

    Hi Raj,
    You can do this by creating a Login screen for the users and check the authentication of each user in PAI i.e. PROCESS AFTER INPUT.
    Store the user information in a database table and check the username and password when the user enters it.
    You can display password as *** also. For this double click on input box designed for password and goto Display tab. Select Invisible in the list and check it.
      CASE sy-ucomm.
        WHEN 'BACK'.
          LEAVE PROGRAM.
        WHEN <fcode for submit>.
          SELECT SINGLE uname pwd
           FROM <DB table>
           INTO (user, pass)
           WHERE username = user AND
                   password = passwd.
          IF sy-subrc = 0.
    <Go to next screen for further processing>
          ELSE.
    <Display Error message and exit>
          ENDIF.
      ENDCASE.
    Regards,
    Amit
    Message was edited by:
            Amit Kumar

  • How  to config receiver http adapter for HTTP POST without XML tags ??

    Hi All,
    Can you please provide some infornation on How  to config receiver http adapter for HTTP POST (Request) without XML tags ?? Our receiving product doesn't support XML formats.
    Is there any option to bypass server authentication on the XI?
    If anybody has the same experience or know how to please provide inputs.
    Thanx
    Navin

    Hi,
    you can use xsl mapping for this in which u xtract
    the contents only but not the xml tag.
    Ranjit

  • Custom PL/SQL servlet for HTTP Listener like HTMLDB

    We would like to migrate our applications from apache that use a custom perl application server to the xdb http listener and would need to be able to write a custom pl/sql servlet for the listener
    eg
    <servlet xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd">
    <servlet-name>Custom</servlet-name>
    <servlet-language>PL/SQL</servlet-language>
    Can this be done? (Well obviously, HTMLDB did it.)
    Is information available to do this?
    Information on the request (url/headers/content) and response (headers/content) objects
    of the http listener would be needed.
    Our pl/sql applications look like
    create package my_app as
    procedure my_job (request xmltype);
    end;
    This is why we need to do the servlet ourselves and why dbms_epg is not suitable.

    Currently
    we don't plan to allow large input to be passed as a
    CLOB parameter to the procedure. Is there a use-case
    for this?YES ;). I have seen this coming up quite a few times in this forum.
    1) we cannot edit sql scripts in Apex directly (>32KB), this is quite inconvenient to download, edit and upload again. If we are talking about sql scripts, they are often larger than 32KB.
    2) building an application where the user can directly edit or copy/paste spreadsheet data or xml data. It is quite a restriction to only have 32KB at your hand.
    3) the common workaround would be to split the data in 32KB chunks and then reassemble them in the backend. Quite tedious.
    4) editing larger HTML texts for a portal application for example.
    5) editing larger HTML texts for a forum application for example.
    ... the list goes on ...
    Another argument is that all other major technologies like servlets, jsps, perl, php, python they are all capable of handling this kind of data. I often feel it is too much of a restriction.
    What do others in the forum think? Feedback is welcome!!!
    Thanks,
    ~Dietmar.

  • How the balance works for http/https in CSS?

    I want to understand how the balance works for http/https in the CSS.
    As per doc,
    - http/1.0=single URL per TCP connection
    - http/1.1=persistent connection.
    Q1. my understanding is http is stateless connection so needs TCP session for each URL. how the http/1.1 works with persistent. keep the same TCP session for a multiple URL request?
    Q2. https is using single URL and continue processing until terminate the https instead of open another URL in the middle of transaction. in this case, I think the client can stick into same service based on the assumption the CSS support persistent. if then, no advanced sticky(ex, srcip) required?
    Q3. looks below both are analogy. what's difference between them?
    - balance srcip(same src IP to the same service)
    - advanced-balance sticky-srcip
    Q4. what's balance decision mechanism for "balance roundrobin" to distribute evenly? ex, in case of multiple URL request coming from same client. evenly distribute URLs?
    Regards,

    Hello,
    first let me clarify 1 point.
    HTTP/HTTPS are standards that are defined in RFC.
    For HTTP/1.1 you can check the following RFC
    http://www.faqs.org/rfcs/rfc2616.html
    Therefore, the behavior of HTTP 1.1 is not defined by the CSS.
    Q1- HTTP/1.1 simply keeps 1 TCP connection to send a received mutiplie HTTP request/response.
    HTTP/1.0 will open 1 TCP connection for every HTTP request.
    Q2- HTTPS is just HTTP over SSL.
    So basically the same rule as above applies.
    HTTP/1.1 can use 1 SSL connection for many HTTP request/response while HTTP/1.0 will use 1 SSL connection for each HTTP request.
    Therefore, if you have customer using HTTP/1.0 you need some form of stickyness to guarantee that every connections will go to the same server.
    Even if only using HTTP/1.1 you may need stickyness.
    A user could disconnect and reconnect and require to be loadbalanced to the same server as before.
    Q3- There is a big different between balance srcip and sticky-srcip.
    The balance srcip simply hash the source ip address to find the destination server.
    The problem of this method is that the loadbalancing is not guarantee to be evenly distributed between the servers.
    With sticky-srcip, you use a normal balance method like round-robin, and then you create a sticky entry in a sticky table.
    Next time this user comes back we first check the sticky entry to find the destination server.
    The advantage is that it guarantess your users will be evenly distributed among the server.
    Q4- roundrobin is applied to connection - not url [by default].
    So if you have 2 users and they both open 1 connection, the CSS will send 1 connection to 2 different servers.
    So each server has 1 connection.
    If one user sens 10 URL and the other 1 sends only 1, one server will have 10 url to process while the other only one.
    That's if you are using HTTP/1.1 and use persistent mode on the CSS.
    You can break persistency and split the url.
    I run out of space and time to explain you everything.
    I suggest you go read the RFC or a book on HTTP.
    Also read the CSS configuration guide.
    There is much more you need to know if you want to take full advantage of the CSS like cookie, ssl offloading, L7 rules vs L3/4 rules, ...
    Regards,
    Gilles.

  • How many listen we have for creative suits Web-design? because i don't know how to install on my new pc! thank you for the answer!

    How many listen we have for creative suits Web-design? because i don't know how to install on my new pc! thank you for the answer!

    This is not a photography question.  It is an application specific question,  Please post in the Photoshop forum.
    Photoshop General Discussion
    Remember, you are not addressing Adobe here in the user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

Maybe you are looking for