Making PI listen on a new/different port for http

Hi,
I have a requirement where we are exposing PI to the internet for some webservice calls. We have firewalls/dmz/gateway etc in the picture.
One part of the problem is that, for requests coming into PI, we need PI to listen on a different port for https, say 446.
How do I go about setting this up in PI?
Thanks,
Harsh
PI 7.1 EHP1

Changing of the web port for https can be done in the general server/port configuration of your PI System.
You can look at the port configuration with transaction SMICM on your ABAP Stack .
http://help.sap.com/saphelp_nw70/helpdata/en/ac/8f813a34872769e10000000a114084/frameset.htm
This is a starting point for reading about the topic. The settings itself can be done, for example, with RZ11

Similar Messages

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

How to configure Mail to use different ports for POP and SMTP?

I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.

Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots.

How do i group different ports for "DAQmxCreateDIChan" for a single task?

greetings.
the thing is that for "DAQmxCreateDIChan" i do this:
DAQmxErrChk (DAQmxCreateDIChan(taskHandle3,"Dev2/port0","",DAQmx_Val_ChanForAllLines));
and i can even do this
DAQmxErrChk (DAQmxCreateDIChan(taskHandle4,"Dev2/port1/line0:1","",DAQmx_Val_ChanForAllLines));
ok, in the first case it means that for taskHandle3 i will read all 8 bits from port0 in "Dev2/port0", right?
in the second case it means that for taskHadle4 i will read only line0 and line1 from port1 in"Dev2/port1", right?
once
this is explained: How can i read all 10 bits (i.e. line0 to line7 in
port0 and line0 to line1 in port1) for a single task so that in the
"DAQmxReadDigitalU32" that goes after "DAQmxCreateDIChan" i can have a
single read instead of two in the example above?
by the way, my device is a pci6229 and i'm using vc++ 2008.
thank you for reading.
ZZ
sorry for double posting...

Hi ZainZeus!
The answer lies on the creation of the channel, DAQmx allows you to include different ports on the same line, that should include both ports on the same task. It should be something like this:
Dev1/port0/line0:7, Dev1/port1/line0:1
All of this must be on the same line under the " ". You can try this and check if it works.
Hope this helps.
Have a great day!

Different ports for web/app servers

Is it possible to configure weblogic server to act as a webserver and app server
with different ports. like 80 for web server and 7001 for app. server?
Thanks in advance.

"OM" <[email protected]> wrote:
>
Is it possible to configure weblogic server to act as a webserver and
app server
with different ports. like 80 for web server and 7001 for app. server?
Thanks in advance.

Possible to have different ports for incoming and outgoing email?

I need to set up a mail account in Mail where I read incoming mail from port 110, but to send outgoing mail I need to use port 587. Is this possible in Mail? Looks as if you only get to set the port once for both operations.

it is indeed possible. go to mail>preferences>accounts, select the account you already created then go to account information and to outgoing server list, click on the list, go to edit server list and in the advanced pane you can change the outgoing port. for the incoming port, again select the account you already created, then go to advanced, and type in the incoming port.
hope this helps

Using a different port for SMTP

Where can I change my preference of port number for SMTP? I would like to use 366 since I think my ISP is blocking port 25.

Your ISP blocks inbound and/or outbound 25?
Port 25 is used for server-server communication and can't be changed.
If your ISP blocks port 25 inbound, then your server can't receive mail from other servers, even if you change it's port.
If your ISP blocks 25 outbound, you still need to send to a destination port 25. For outbound, the only thing you can do is relay through your ISP (either from client, or configure postfix to relay through ISP).
When people add alternate ports for SMTP, it's for the mail client to submit mail to the server. From there, server-server is always going to have a dest port of 25.
If you wish to add an alternate port (you said you wanted 366) for mail submission, edit /etc/postfix/master.cf
Find this line:
smtp inet n - n - - smtpd
add another below it (location doesn't really matter) like this:
366 inet n - n - - smtpd
Then stop/start mail server and port 366 will accept smtp connections.
FYI- the standard port for smtp submission is 587. Doesn't matter if you want to use another port (366), just make sure you're not trampling on another service which may use that port.
Jeff

NEW Internet port for Email

I was sent the following communication:
At Verizon, we continue our efforts to enhance your online experience as well as ensure ongoing security for our Internet customers. As a result, Verizon Online has modified the way email is handled when sent or received through an email application other than MyVerizon.
If you only use MyVerizon to access your email account, no action is required and you may disregard this email. If you do, however, use other applications to access your Verizon email, such as Outlook Express®, you will need to modify your email settings to take advantage of enhanced security we now offer.
In order to make these modifications, please visit http://verizon.com/emailsettings for information about the email settings you need to update. Additional information may also be available by going to our online forum at http://forums.verizon.com/.
Thanks for being a valued Verizon Online customer and we encourage you to act now to ensure your email account has the proper settings on a going-forward basis.
The page recommended I change the port setting from 25 to a different value.
THAT DID NOT WORK! I GOT NO CONNECTION! I changed it BACK!
Go **bleep** yourselves!

I have exactly the same issue, and I'm a verizon.net user on Fios.
I got the e-mail notice to change my Outlook 2007 accounts to the new settings - Incoming server (Pop3) to 995; Incoming server (SMTP) to 465, select SSL, and that my outgoing server (SMTP) requires authentication, and to use the same settings as my incoming mail server.
Double checked that everything was input correctly and tried to test account settings.
Failed - timed out after about a minute due to no response from the mail server. Checked again - all settings were correct. Again failed.
Closed Outlook and restarted. Checked settings and re-tried both Send/Receive and Test Account Settings.
Failed again due to timeout.
Went back in and reset to defaults (original ports and non-SSL settings). Worked perfectly.
Why does Verizon send out these e-mails and when you perform the appropriate maintenance ... It fails to work??
Very frustrating.

Different Ports for Sender and Receiver?

For testing a tool it would be nice to run RTPSender and Receiver on the same computer. But here?s the problem. I run VideoTransmit and AVReceive2 (both from the Sun code samples) with the following parameters. VideoTransmit should send to IP A and to Port 22224. AVReceive2 should listen to packets from IP B and Port 22224. Now VideoTransmit sends from a random port, but Port 22225 is used on both computers for exchanging user information. Because of this it isn?t possible to run both on the same computer because both want to use port 22225 for a connection.
Is there a possibility to change this?

http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/
RTPManager
http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/javax/media/rtp/RTPManager.html
SessionManager-Depricated
http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/javax/media/rtp/SessionManager.html
You can Send and Receive on one computer.
Can't remember the combo though.
It's one of
transmit 192.168.1.255 22222 //multicastIP port#
receive 127.0.0.1 22222 //localhost port#
or
transmit 192.168.1.100 22222 //computerIP port#
receive 127.0.0.1 22222 //localhost port#
There is the answer in these forums somewhere.
I just hate to see people struggle.

Database account locked as it tries to connect different ports for 16 times

I need a help in answering one of the issue encountered last week.
I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
is it a NETWORK issue or issue with DATABASE SERVER only?
Thanks
SSP
Edited by: 960738 on Sep 22, 2012 9:13 PM

960738 wrote:
I need a help in answering one of the issue encountered last week.
I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
is it a NETWORK issue or issue with DATABASE SERVER only?
Thanks
SSP
Edited by: 960738 on Sep 22, 2012 9:13 PMDBLINK is 100% oblivious to the fact any port exists.
DBLINK only contains username, password & TNS Alias.
can you post actual SQL & results?

Changing port for http server not working, please help

Hi Gurus
I installed standalone hhtp server from db companion cd on AIX 5.3 10gR2.
I tested the http server URL http://XXX.XXX.XXX.com:7777/epdev/helloworld
after creating a procedure in the db and it works
But I need http server to use port 80 and not default of 7777
I did 2 changes in httpd.conf - Port 80 and Listen 80 But after this I am not
able to start http server . Can somebody tell me what am I missing here ?
I even tried starting it as root and got error as well
$HTTP_HOME/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=cov6053:6200
0 of 1 processes started.
ias-instance id=IAS-X-cov6053.6299
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=720916)
failed to start a managed process after the maximum retry limit
Log:
/export/host/thishost/unix/cen/app/oracle/product/http10.2/opmn/logs/HTTP_Server~1
The log file has this entry no error:
07/11/15 10:45:26 Start process
/export/host/thishost/unix/cen/app/oracle/product/http10.2/Apache/Apache/bin/apachectl start: execing httpd
Thanks a lot for your help

I was able to reslove this. Followed this :
On UNIX, you will hare to run as root if you want to run on ports less than 1024.
In order to run Oracle HTTP Server as root, perform the following steps:
Shutdown Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] stopproc ias-component=HTTP_Server
Change to root user. Navigate to ORACLE_HOME/Apache/Apache/bin on UNIX or ORACLE_HOME\Apache\Apache\bin on Windows and execute the following command:
chown root .apachectl
chmod 6750 .apachectl
Exit root.
Restart Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] restartproc ias-component=HTTP_Server

Server Host and Port for HTTP Client Too

Hi All,
I'm using the HTTP Client tool to connect to XI. How can i find out the ServerHost, ServerPort and Client values.
Thanks,
Sandeep

Hi Michal, Thanks for the response,
But when i use these values and connect. I get the Response - Resource not found . See the HTML below
Result:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
    <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  404 &nbsp Not Found</b></font></td>
</tr>
<tr bgcolor="#3F73A3">
    <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
    <td height="23"><img width=1 height=1 border=0 alt=""></td>
    <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.45 </b></font></td>
</tr>
<tr bgcolor="#9DCDFD">
    <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
<br><br><br><br><br><br>
<p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  The requested resource does not exist.</b></font></p>
<p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_parent">main page</A> of this application!</PRE></font></td></tr></table></font></p>
</body>
</html>
The interface, service all are correct. Do you think something else is wrong?
Thanks,
Sandeep

How to run two different databases on different ports?

I just created a second database on my machine with SID=B on which there was already a database with SID=A.
Currently, the listeners for both DB instances work on the same default port 1521. How can i configure my Oracle instances so that the listener for A remains on port 1521 and listener for B listens on port 1531? I am new to database stuff so this might be a dumb question. Apologies in advance!
Jimit

Jimit wrote:
I want it because when i am trying to create an informatica repository on database B, i am getting the error
TNS 12154 - could not resolve the connect identifier specified.
And what research led you to believe that creating another listener was the solution? With a 12154, the request never left the client process .. it never got to the listener for the listener configuration to even matter.
see: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ (ora-12154 TNS:could not resolve the connect identifier specified)
The Listener service for database B is up and running, i am able to connect to database B through cmd and the tnsnames.ora file also has the TNS entry for database B.
See the many previous comments regarding multiple listeners or listeners "dedicated" to a specific database.
When i try to create my Informatica repository on database A which i installed earlier, it succeeds, however i cannot use database A because of certain restrictions.
And what are those "certain restrictions"? How can someone help if you hide the parameters under which you are working?
Since there is no difference in database A and B except the SID, and the user ids i am using to create the repository have same privileges, i could not think of any other option.
I can think of another option. "Work the error message". If you would research ora-12154 (tns-12154) you would find it has nothing whatsoever to do with listeners.
Hence, do you think i should go for different ports for both listeners? Maybe it can help.
It won't help. It will just make matters worse.

Problem when we created the managed server to configure different ports.

I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu P

Dear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew

How to create more than one VIP use the same IP address and different port(e.g. 80 and 443)

Hi,
I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port.
for example:   VIP address 1.1.1.123   use port 80 for HTTP   and port 443 for HTTPS
However,
the following problems encountered, when I create the second VIP.
PS C:\Windows\system32> New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -LoadBalancerVIPTemplate $VIPTemplate1 -LoadBalancerProtocol $Protocol1 -LoadBalancerHealthMonitor $HM1
New-SCLoadBalancerVIP : A virtual IP (VIP) address with the specified name (vip11) or
address (1.1.1.123) already exists on the load balancer (xxx). (Error ID: 13691)
Specify a different name or IP address and try again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq
"{b41a77eb-ae0b-490a-8948-662a529b1d8c}"})
At line:1 char:1
+ New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -Lo ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ReadError: (:) [New-SCLoadBalancerVIP], CarmineException
    + FullyQualifiedErrorId : 13691,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.Ne
   wSCLoadBalancerVIPCmdlet
PS C:\Windows\system32>
any suggestions ?
Thank you in advance !

I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.

Making PI listen on a new/different port for http

Similar Messages

Maybe you are looking for