How do I make my Mac not use the external mic on my Apple Earphones but output audio through the earphones?

I want to use the microphone built in to the MacBook Pro while still outputting audio through the Apple Earphones. This is because the microphone on my earphones has stopped working. If anyone knows how to do this, please tell me

Based on the info you provided, is this your printer?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=5058336#N187
If so, it appears the do have a driver available for Lion.

Similar Messages

  • I want to use an external mic, on my DV6. But the on-board mic remains on. How can I switch it off?

    On every other piece of kit I've ever used, plugging in an external mic (or headphones for that matter) automatically disables the on-board microphone (either side of the webcam on this notebook).  I have managed to turn off the on-board mic but doing so disables the external mic input too. I'm running Windows 7.
    Please help - it's driving me nuts!

    On every other piece of kit I've ever used, plugging in an external mic (or headphones for that matter) automatically disables the on-board microphone (either side of the webcam on this notebook).  I have managed to turn off the on-board mic but doing so disables the external mic input too. I'm running Windows 7.
    Please help - it's driving me nuts!

  • How do I make Time Machine NOT access my external drive?!?!?

    Even though Time Machine is turned off it keeps accessing my external HD. About every 10 minutes it will run the drive for a short time, the drive used to just sit nice & quiet until I wanted to read/write to it, now the constant on/off cycle is driving me nuts.
    Is there any way to stop OSX 10.5 from doing what it's doing??

    Because something keeps spooling up the drive @ every 10-20 minutes. Before I upgraded to 10.5 everything worked normally. The drive would just sit nice & quiet & idle until I wanted to read/write to it. Then it would become active, as expected.
    Now, however, something in 10.5 is accessing the drive, and running it, for some mysterious reason. Like I said, this happens about every ten minutes or so and it's very annoying.
    I realize that I haven't set-up Time Machine, I don't want to use it, this is a work computer that already has several layers of redundant back-up, so I really have no interest in using Time Machine right now.
    So if it's not Time Machine activating the drive does anyone have any other ideas? This never occurred before installing 10.5, which leads me to believe that there's something in the OS responsible for this.

  • I have not used an e-Mail for an Apple ID, but it is showing that I did, how do I delete the other one?

    The Header describes my question, but is ther some way to recover it not by e-Mail becasue it's not going through and I don't know the birth year that was put down?
    Thanks!

    Delete those apps that are not under your Apple ID and re-download them using your Apple ID.

  • How can I get synched audio through the computer rather than camera in FCE?

    There does not seem to be an easy way to listen to FCE audio through the computer's setup for internal or external speakers. I have for years used Detour to route all of my audio through an M-Audio Firewire 410 interface, and then on to my home stereo system. I then route all systems sounds and sounds in apps like iMail through the internal speaker. This works great. Except with Final Cut Express. For quite a while I could not do anything except play through a firewire connected to an attached Sony PC100 digital video camera, plugging headphones into it's jack.
    After many hours and reading many strings on this and other discussion boards, and even reading the product manual, I tried sending FCE through the computer speaker and sure enough it works. By that reasoning, I had Sound Prefs send all audio through the m-Audio setup and that works. Except now I must listen to all of the system sounds that way as well.
    OK, I could live with that for my editing sessions, except that now I am experiencing a sound synch delay of around one second. It's all fine when I switch back to the camera as the monitor, but not when routed through, what should be the better sound setup, having the comouter send the soud via the m-audio and stereo.
    G5 dual 2Mgz   Mac OS X (10.4.5)   m-audio firewire 410; 1.5G DDR SRAM;

    In final cut, you want the audio to be following the same path as the video - otherwise, as you have experienced, there are processing delays.
    If you are sending your video out firewire to an external monitor, the audio should follow. Take the audio off of the A/DV converter and route it to your speakers (or amp & speakers) from there.
    good luck.
    x

  • I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

    I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

    This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
    http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

  • How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
    After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
    Windows doesn't use EFI, will have UEFI in Windows 8 though.

  • HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
    I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
    I've attached screenshots of the About This Mac section hoping it may help shed some light.
    Thank you in advance for your help!
    PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
    <Image Edited by Host to Remove Serial Number>

  • How can I make my Mac Book Pro print to a Panasonic KX-MB772?

    How can I make my Mac Book Pro OSX 6.8 talk to a Panasonic KX-MB772 printer?

    You can't. The KX-MB722 is one of the few remaining printers in the class of devices called "Windows Printers" that has no on-board printing software -- it relies on a host computer to provide all of the software functionality and Panasonic only provides such software for certain versions of Microsoft Windows. In this case, it means a 32-bit version of Microsoft Windows (2000-XP, though it will probably reliably on Windows versions up to 7). Note that these devices are not guaranteed compatible with future versions of Windows either (Panasonic has already dropped software support for this model).
    I'm pretty sure that the device doesn't support remote printing without the software either (e.g., you can't setup a computer with Windows on it, share the printer, and then print to the shared printer without their software).

  • I just downgraded from iTunes 11 back to itunes 10.7.5. My iTunes is now working from one of the Previous Music Librabies. How can I make that previous library my current library? Also, I can't empty iTunes 11 frome the trash. Why not?

    I just downgraded from iTunes 11 back to itunes 10.7.5. My iTunes is now working from one of the Previous Music Librabies. How can I make that previous library my current library? Also, I can't empty iTunes 11 frome the trash. It tells me iTunes 11 is still open. What's going on?
    Thanks in advance!

    Without providing details on exactly what you did it is hard to provide an answer.  It's like me saying, "This chocolate cake I made tastes wrong," but not providing the recipe for review.  Maybe it was the garlic in that particular recipe.
    If iTunes is successfully using a previous library which you rename to iTunes Library.itl then that is now the current library.
    Have you restarted your computer and then tried emptying the trash?

  • How i can make web application by using oracle form6i

    how i can make web application by using oracle form 6i , indetail .
    A.R

    indetail .As Andy Millman might observe, you're having a laugh. This is a big topic, far exceeding what it is reasonable to expect people to help out with in a Forum. Do you not have the 6i documentation?
    OTN has a site for upgarding to web forms. Although it is mainly focussed on moving to 9i/10g a lot of the issues and solutions apply to moving a 6i client/server app to web deployment. For further help there is a Forms.
    Cheers, APC

  • How can I make my Mac recognize my USB device when I plug it in?

    How can I make my Mac recognize a USB device when I plug it in? When I plug in my flashdrive drive, the device doesn't show on my desktop, so  I have to search for it...

    You can try using 'NTFS-3G', its free and you can download it at: http://mac.softpedia.com/get/System-Utilities/NTFS-3G.shtml

  • How do I make a Mac forget it's ever been set up?

    Does anyone know how I can make a Mac forget that it's ever been turned on, so that if it were booted up, it would go into the Setup Assistant as if it were new? I remember seeing a page on this on Google, but I can't find it any more.

    Zeroing the hard drive means writing zeros to the drive to remove all data (fast erasing just removes the index file, but keeps the data). You can do it in Disk Utility, under Erase > Options.
    If you already created the account and you made a mistake in the true name (the one which allows capitals and spaces) you can correct it via the Accounts preferences. If you made a mistake in the user name which is used in the home directory name, you can create a new user, make that one an administrator, and remove the old user.

  • HT201363 I have a lot of money on my Apple ID but when I try to buy something it ask for my security questions that I do not remember the answers to. I also don't have access to the email I used to set up my Apple ID but I do know the password how do I fi

    I have a lot of money on my Apple ID but when I try to buy something it ask for my security questions that I do not remember the answers to. I also don't have access to the email I used to set up my Apple ID but I do know the password how do I fix this ?

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (105412)

  • How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?

    How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?
    We are two people using three difrent Macs, 1 Iphone and 1 Ipad with separate USERS  on each Mac but sharing the same Apple ID: xxxxxx
    I set up the first user to iCloud and it was OK but when I set up the second user to use iCoud the first users's info gets mixed with the second user's info?
    Do we have to set up a diffrent Apple ID for each other?
    Sometime ago I added my friends E mail (yyyyy) to the main Apple ID (xxxx) as for using his E mail account (to separate our e mail accounts, and it's working ok) but now when I try to create a new apple ID whith the same friend's e mail (yyyyyy)  it says that his mail (yyyyy) is already an apple ID when the Apple ID is really my E mail (xxxxx)... any clue?
    Thanks

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

Maybe you are looking for