How do I move audio in an Imovie Video?

I'm trying to make an Imove video. I filmed the footage in Photobooth, and then imported it into Imovie. There was a delay of the sound in Photobooth, but I thought it was nothing. So I get to Imovie, and there was a delay once again. I don't know how to get the audio to be heard when I move my mouth. It seems like there is a very simple answer to this problem, yet I can't seem to find it. Any help is appreciated!
Thanks!

(in order as in.. right after the other or right after they
land...)
this is right after the other (with a given time to drop the
next)
if they are all seperate boxes, do something like this:
on the onClipEvent(load), put an order, like drop=1,
drop=2,drop=3
onClipEvent(load)
drop=2
time=0
onClipEvent(enterFrame)
time++
if(time>drop*12) //12 frames before dropping the second
one
**your drop code
if you want them as duplicated, do this:
duplicatedmovie=[the duplicate movieclip code]
duplicatedmovie.drop=1
and in the movieclip that you are duplicating, add this:
onClipEvent(load)
time=0
onClipEvent(enterFrame)
time++
if(time>drop*12) //12 frames before dropping the second
one
**your drop code
basically the same code except that the drop was set in
different areas.
I hope it helps, but I'm not sure if it was what you were
looking for.

Similar Messages

  • How do I fix audio in an iMovie video?

    I'm trying to finalize a video from iMovie, but whenever I finalize it, no matter what media I use, the sound for the video clips in my movie are always off. But on iMovie, the videos and audio work fine. How can I fix this??

    It is happening on the timeline and when I burned the DVD it also happened on the DVD.  However, I tested to see if it was the camera by linking the camera to the TV and everything was in sync...so it is not the camera.
    It is interesting that when I captured the video in one shot, most of the video was out of sync with the background taping sounds.
    I may have done a workaround. I have since captured the video in chunks and found that when I do that the alignment of video and all sound are OK except for a couple of sections of the video.
    It appears that when captured all at once, the sections that are out of sync, pollute the remaining parts of the video.  It sounds strange, but that it all I can come up with as a rationale. Why?  I have no idea.

  • How I can move my all photos and videos in my mac book pro

    How I can move my all photos and videos in my mac book pro

    1. Copy photos and videos to a wireless flash drive (see picture below)
    2. Download them from flash drive (wirelessly) to iPad

  • How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

    How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

    Attach camera via USB or put card in card reader.
    Go to FCP, and go to the Log and TRANSFER window.
    If FCP recognizes the card, you will see your clips listed on the left.
    You can view them, set Ins and Outs, and import just what you want.
    Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

  • HT4437 how  can i stream audio to ipad from video playing on the apple tv using air play?

    how  can i stream audio to ipad from video playing on the apple tv using air play?

    I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

  • Can I save audio only from iMovie video...?

    Can I save audio only from iMovie video...?

    vipfilmproductions wrote:
    Can I save audio only from iMovie video...?
    Sure.
    Choose Share>Export Using QuickTime.  Then select Sound to AIFF from the Export dropdown menu.
    The resulting will be an audio only AIFF file.  The Sound to AU or Wave work in the same way and will create audio files of those file types.
    Matt

  • How do I move my iTunes music or videos to my second hard drive on my iMac?

    How do I move my iTunes music or videos to my second hard drive on my iMac?

    This appears to have worked, but I how can I be sure?  If I transfer to the recycle bin, I have to permanently delete the files because they are too large.  I did not do this.  The files seem to be on the external hard drive.

  • How do I improve audio quality in iMovie?

    I have heard that you can strip out the audio track in a video clip, improve it in GarageBand and then put it back into iMovie.  Is this true?  I'd like to improve the audio quality on a series of video talks.

    Publish your movie first by going to Share and then select Media Browser.
    After it is "published" open up Garageband.
    Click "New Project"
    Select "Movie"
    Choose a name for your project.
    Select your movie from the browser on the right.
    Adjust your audio.
    When done, you can export your movie with new audio from Garageband

  • HT1364 how do I move audio book from computer to ipod

    How do I move an audiobook from my computer to my ipod?  I figured out how to move the music.

    Same way, but via the Books tab when the device is connected. You may need to scroll down.
    tt2

  • HT6012 How to get movies from the old iMovie into the new version

    I’m very ‘disappointed’ to find out by opening iMovie after updating to Maverick that all my movies seemed to be lost! Or in contrary to other programs, e.g. iPhoto, the movies apparently are left behind in the older version of iMovie.
    So after first shock I have to find out that I could ‘recover’ them via Help and Service by updating projects and events. I did this and it seemed to work until this action met movies in my older iMovie project library without original movies in the event library. The update action got stuck here and I had to force quit.
    Next morning no trace of any update action in the new iMovie. So I tried again. But now I got the message that iMovie didn’t find any projects and events!!!
    Well, they are stille there! Somewhere!
    Can anyone help me out?
    LB

    iMovie 10.0.1 has been released to address reliability issues when updating projects and events from previous versions of iMovie. Specifically, iMovie could appear to stop responding or quit unexpectedly during the update process.
    If you encountered these issues, you should now be able to update your projects and events successfully. To do this, visit the link below and follow the instructions listed in the section "If updating is interrupted or takes an extended period of time."
    http://support.apple.com/kb/HT6012

  • I have two Apple ID's.  How do I move all the songs and videos that I bought using Apple ID "A" over to Apple ID "B".  I plan to use Apple ID "B" from here on out.  Thanks

    I want to move all the songs and videos that I purchased using Apple ID "A" over to Apple ID "B". 
    I plan to use Apple ID "B" from here on out. 
    Thanks to all. 
    I'm using Macbook Air
    OS X ver 10.9.3

    You can't do this yourself; if desired, you can ask the iTunes Store staff if they'll do it, but they probably won't.
    (108496)

  • How can I cut audio clips within iMovie?

    This may be a simple solution but I just can't seem to figure it out. I would like to add audio (music) to just the beginning of my iMovie project. But whenever I drop a music file into the timeline, it stretches it all the way through the entire movie.
    Also, I'd like to know how to only adjust my voice to certain clips of the movie, and not the whole entire timeline.

    If you only want the sound clip for a set period of time, drag it on top of one of the video clips near the beginning that will prevent the audio from becoming a 'background music clip'. Grab the title bar of that clip in the Project window and drag it until the whole background area changes from purple/green to the normal dark grey color of the Project window. Same would apply to your voice clips as well, just drag those sound clips right on the very middle of the thumbnail image of the video clip, and then slide it around to where it needs to be by dragging it to the left or right.

  • How to burn movie to dvd from imovie?

    How to I burn a home movie from imovie theater to dvd?

    Steve Jobs "BluRay is a bag of hurt"
    Not if you buy FCPX from them at $300.
    Then they will provide you with the ability to burn both DVD and BluRay.
    Not dead yet !
    The "BluRay is a bag of hurt"  is a bunch of hooey.
    Apple's business model is for downloaded everything. They don't sell software/movies/music on physical media.  It's as simple as that.
    I have iTunes, Netflix and Flixster. But the movie watching experience is always vastly superior when I just pop in a Blu-ray and watch my movie in 1080P and 7.1 sound.

  • How to i split audio clips? Imovie 11

    I'm trying to split a voice over audio clip  I recorded in Quicktime and imported into my project. I can't find the precision editor nor can I select the clip and activate the split clip command under the Clip menu.  It's dim.  I cannot find out how to split it.  Any ideas what I'm doing wrong?
    I'm using iMovie 11.

    Using iMovie 11 on Mac 10.8.3, when I right-click on a sound track, this is the menu I see:
    No 'split clip'.

  • How do I move audio files from song list?

    I have some audio MP3 files in iTunes, but they show up under the Songs List. Can I move them so they don't show up in the Music songs list, e.g. move them to podcasts?

    No. In order to show up under Podcasts, they need to be dopwnloaded via an RSS feed which tells iTunes it is apodcast.

Maybe you are looking for

  • Fix for "iPod shows up in Windows but not in iTunes"

    This is a possible fix for those with the "iPod shows up in Windows but not in iTunes" problem. This also fixes those have the update/restore problem (ipod disconnects after clicking update/restore in itunes) SOLUTION SOLUTION I had the exact same pr

  • How do I save items from my old ipad to my new one?

    How do I save items from my old ipad to my new one?

  • Purchase orders and automatic GL Account

    Hi, In a PO, I try to automatically enter the GL account using user fields. I want the users to select a userfield and to setup the account number associated into the PO Line GL Account field. My configuration is : - user table (PROJ) with a code, an

  • AIR SDK Functions

    Hi, I am trying to compile and build a mxml file and its app-config.xml file into a AIR installable file from an AIR application. Is it possible to access the AIR SDK functions inside an AIR application. Please help in this issue. Regards, Code....

  • Highlight button in preview is not working...

    Hi, so this morning I did my software update for the OS X Yosemite, and when I took a screenshot of a picture, and I wanted to add text but the 'highlight' button is not working, please help! I'm on my macbook pro.