How do I move databases using RMAN with minimal downtime ?
How can I do the following using RMAN ?
DB version 10.2.0.4
Redhat 5.2
I am not using an rman catalogIn the past I have moved large databases from 1 server to another with 5 minutes downtime using backups done the old way by putting tablespaces in backup mode and making copies of the datafiles.
I used the following method :
========> Part 1
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE set DATABASE "VPMY" RESETLOGS ARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 3
....etc
LOGFILE
......... log file names
DATAFILE
... list of datafiles
CHARACTER SET US7ASCII;
========> Part 2
Up until the scheduled downtime, I would copy the archive logs from the production server to the new and run the following to apply the latest archive logs:
RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL;
->AUTO<-
========> Part 3
After applying the last archive log while in restrict mode -
ALTER DATABASE OPEN resetlogs;
My question is, how do I do Part 2 in RMAN. I have managed to duplicate databases and restore databases using rman to a different server, but this obviously only covers the data upto the backup point. How can I do the above parts 1 -3 with downtime of about 5 minutes like I have done using old methods ?
Any help is much appreciated/
you should be able to recover as you go with rman as well..
copy the archived logs from A to B and apply them as they come in.
run
set until sequence x thread 1;
recover database;
if you're not opening the database after recovery you can just increment the set until sequence as the logs come in and do a new recovery.
Similar Messages
-
How to restore a table using RMAN with previous backup ?
Hi everyone,
we have to restore a table from 1 week previous backup using RMAN.
Could you show me how to restore a table using RMAN with previous full backup.
please Help me out.
Thanks
Info > oracle 10g, OS: AIX5LHi,
first of all you must have all the archivelogs since you want to recover your table from the previous backups.
anyways if you want to recover your table then you need to perform incomplete recovery to the point where you loss the table for that you need to restore and recover your database.you likely to loose all the transcation which occurs to the point where you you loose your table.
thanks.. -
Hello All,
The disk failure caused our production data on the disk to be resotred with the backup data available and recovered through RMAN with cotrolfile , and no catalog DB is configured.
I had the restored the spfile and control file then recovered the database,
startup nomount;
RESTORE SPFILE FROM ' path ' ;
Shutdown immediate;
startup nomount
Restore controfile from autobackup;
restore database;
[AT POINT , A MESSAGE PROMPTED LIKE " failur of restored command - some targets not found" (thinking may be few archives are not found, i proceeded to incomeplete recovery of DB) ]
recover database;
Finished reocvery .
Now in the Grid control i see that 60 blocks of a particular datafile are corrupted and needs recovery. Do i need to get the data file resotred again and recover it or any simple way to recover this data file
When i perform the block recovery , it says recovery failed and when i run the data file recovery it succeeds. Please provide you inputs to recover the database as it is production BI database and pretty critical to our client.
Thanks for your valuable time in advance.
Regards,
Ran G.These is a common problem if the object are created due to NOLOGGIN option. If you check most of the object which are facing block corruption is indexes .
Use the below query to check the objects :
It will map each block from v$database_block_corruption to either a segment or if the block is free.
$ sqlplus / as sysdba
set pagesize 2000
set linesize 250
SELECT e.owner, e.segment_type, e.segment_name, e.partition_name, c.file#
, greatest(e.block_id, c.block#) corr_start_block#
, least(e.block_id+e.blocks-1, c.block#+c.blocks-1) corr_end_block#
, least(e.block_id+e.blocks-1, c.block#+c.blocks-1)
- greatest(e.block_id, c.block#) + 1 blocks_corrupted
, null description
FROM dba_extents e, v$database_block_corruption c
WHERE e.file_id = c.file#
AND e.block_id <= c.block# + c.blocks - 1
AND e.block_id + e.blocks - 1 >= c.block#
UNION
SELECT s.owner, s.segment_type, s.segment_name, s.partition_name, c.file#
, header_block corr_start_block#
, header_block corr_end_block#
, 1 blocks_corrupted
, 'Segment Header' description
FROM dba_segments s, v$database_block_corruption c
WHERE s.header_file = c.file#
AND s.header_block between c.block# and c.block# + c.blocks - 1
UNION
SELECT null owner, null segment_type, null segment_name, null partition_name, c.file#
, greatest(f.block_id, c.block#) corr_start_block#
, least(f.block_id+f.blocks-1, c.block#+c.blocks-1) corr_end_block#
, least(f.block_id+f.blocks-1, c.block#+c.blocks-1)
- greatest(f.block_id, c.block#) + 1 blocks_corrupted
, 'Free Block' description
FROM dba_free_space f, v$database_block_corruption c
WHERE f.file_id = c.file#
AND f.block_id <= c.block# + c.blocks - 1
AND f.block_id + f.blocks - 1 >= c.block#
order by file#, corr_start_block#;
Below oracle support note will help you :
ORA-1578 / ORA-26040 Corrupt blocks by NOLOGGING - Error explanation and solution (Doc ID 794505.1)
The Gains and Pains of Nologging Operations (Doc ID 290161.1)
SQL> select d.NAME as DBF_NAME, t.NAME as TS_NAME, d.UNRECOVERABLE_CHANGE# as NOLOG_CHNG#, to_char(d.UNRECOVERABLE_TIME, 'Dy DD-Mon-YYYY HH24:MI:SS') as NOLOG_TIME from V$DATAFILE d join V$TABLESPACE t on d.TS# = t.TS# order by t.NAME;
Thanks,
gssdba.wordpress.com -
Clone of auxillary database using rman with the source database unavailable
Hi,
Is it possible to clone a database with just the source database's backup pieces. The source database is currently unavailable. The source database backup was taken through rman - nocatalog mode. We have been provided the backup pieces. Any clues on how to go about it?NAME TYPE VALUE
db_file_name_convert string /u34/oracle/data/FRD9, +DG_OAP
PST1/OAPPST1/DATAFILE, /u34a/o
racle/data/FRD9, +DG_OAPPST1/O
APPST1/DATAFILE, /u35/oracle/d
ata/FRD9, +DG_OAPPST1/OAPPST1/
DATAFILE, /u36/oracle/data/FRD
9, +DG_OAPPST1/OAPPST1/DATAFIL
E, /u37/oracle/data/FRD9, +DG_
OAPPST1/OAPPST1/DATAFILE, /u38
/oracle/data/FRD9, +DG_OAPPST1
/OAPPST1/DATAFILE, /u39/oracle
NAME TYPE VALUE
/data/FRD9, +DG_OAPPST1/OAPPST
1/DATAFILE, /u40/oracle/data/F
RD9, +DG_OAPPST1/OAPPST1/DATAF
ILE
log_file_name_convert string /u32/oracle/data/FRD9, +DG_
OAPPST1_AUX1/OAPPST1/ONLINELOG
SQL> -
Move large database to other server using RMAN in less downtime
Hi,
We have large database around 20TB. We want to migrate (move) the database from one server to other server. We do not want to use standby option.
1) How can we move database using RMAN in less downtime
2) Other than RMAN is there any option is available to move the database to new server
For option 1 (restore using RMAN),
Whether below options are valid?
If this option is valid, how to implement this?
1) How can we move database using RMAN in less downtime
a) Take the full backup from source (source db is up)
b) Restore the full backup in target (source db is up)
c) Take the incremental backup from source (source db is up)
d) Restore incremental backup in target (source db is up)
e) Do steps c and d, before taking downtime (source db is up)
f) Shutdown and mount the source db, and take the incremental backup (source db is down)
g) Restore last incremental backup and start the target database (target is up and application is accessing this new db
database version: 10.2.0.4
OS: SUN solaris 10
Edited by: Rajak on Jan 18, 2012 4:56 AMSimple:
I do this all the time to relocate file system files... But the principle is the same. You can do this in iterations so you do not need to do it all at once:
Starting 8AM move less-used files and more active files in the afternoon using the following backup method.
SCRIPT-1
RMAN> BACKUP AS COPY
DATAFILE 4 ####"/some/orcl/datafile/usersdbf"
FORMAT "+USERDATA";
Do as many files as you think you can handle during your downtime window.
During your downtime window: stop all applications so there is no contention in the database
SCRIPT-2
ALTER DATABASE DATAFILE 4 offline;
SWITCH DATAFILE 4 TO COPY;
RECOVER DATAFILE 4;
ALTER DATABASE DATAFILE 4 online;
I then execute the delete of the original file at somepoint later - after we make sure everything has recovered and successfully brought back online.
SCRIPT-3
DELETE DATAFILECOPY "/some/orcl/datafile/usersdbf"
For datafiles/tablespaces that are really busy, I typically copy them later in the afternoon as there are fewer archivelogs that it has to go through in order to make them consistent. The ones in the morning have more to go through, but less likelihood of there being anything to do.
Using this method, we have moved upwards 600G at a time and the actual downtime to do the switchover is < 2hrs. YMMV. As I said, this can be done is stages to minimize overall downtime.
If you need some documentation support see:
http://docs.oracle.com/cd/E11882_01/server.112/e18951/asm_rman.htm#CHDBDJJG
And before you do ANYTHING... TEST TEST TEST TEST TEST. Create a dummy tablespace on QFS and use this procedure to move it to ASM to ensure you understand how it works.
Good luck! (hint: scripts to generate these scripts can be your friend.) -
Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND
Hi All,
I am in confusion how to create logical standby database from primary database using rman active database command.
What i did:-
Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
I done the creation of logical standby database by converting physical standby to logical standby database
I am following the below mentioned doc for the same:
Creating a physical and a logical standby database in a DR environment | Chen Guang&#039;s Blog
Kindly guide me how to work over the same or please provide me the steps of the same.
Thanks in advance.Thanks for your reply
I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
My primary database pfile is:
pc01prmy.__db_cache_size=83886080
pc01prmy.__java_pool_size=12582912
pc01prmy.__large_pool_size=4194304
pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01prmy.__pga_aggregate_target=79691776
pc01prmy.__sga_target=239075328
pc01prmy.__shared_io_pool_size=0
pc01prmy.__shared_pool_size=134217728
pc01prmy.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.fal_client='PC01PRMY'
*.fal_server='PC01SBY'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_dest_state_3='DEFER'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
My logical standby pfile is:-
pc01ls.__db_cache_size=92274688
pc01ls.__java_pool_size=12582912
pc01ls.__large_pool_size=4194304
pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
pc01ls.__pga_aggregate_target=79691776
pc01ls.__sga_target=239075328
pc01ls.__shared_io_pool_size=0
pc01ls.__shared_pool_size=125829120
pc01ls.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
*.audit_trail='db'
*.compatible='11.1.0.0.0'
*.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
*.db_block_size=8192
*.db_create_file_dest='/u01/app/oracle/oradata'
*.db_domain=''
*.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
*.db_name='pc01prmy'
*.db_unique_name='pc01ls'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
*.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
*.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
*.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
*.open_cursors=300
*.pga_aggregate_target=78643200
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=236978176
*.undo_tablespace='UNDOTBS1'
Kindly advice over the same -
I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
The meta data for each image is missing.
I have over 2,000 images. I don't want to go back through each image and add meta data.
Is there some way to move everything?No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention. -
How to connect oracle database using jsf
how to connect oracle database using javaserver faces with connection pooling
Here is one way...
http://jakarta.apache.org/commons/dbcp/ -
Cloning a database using rman where source's dbid changed..
Any idea on how to .. cloning a database using rman where source's dbid changed..
if you need to change dbid of target then use DUPLICATE command, see the below links.
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1008888
http://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php -
How to overcome Block corruption using RMAN
Hi All,
How to overcome bolck corruption using RMAN. What is the procedure to do so.
Thanks & Regards
J.VenugopalHi all,
I´ve performed the following command on RMAN:
RMAN> BACKUP VALIDATE CHECK LOGICAL DATABASE ARCHIVELOG ALL;After, I query the V$DATABASE_BLOCK_CORRUPTION table, and the below records
was returned:
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
67 4670 1 1202832866 LOGICAL
68 154131 338 1175601952 LOGICAL
68 155329 60 1174783128 LOGICAL
68 155409 60 1174783132 LOGICAL
68 155471 78 1174783135 LOGICAL
68 155551 78 1174783139 LOGICAL
68 155631 18 1174783143 LOGICAL
68 155651 18 1174783144 LOGICAL
68 155671 18 1174783145 LOGICAL
68 155691 18 1174783146 LOGICAL
68 155711 18 1174783147 LOGICAL
68 155731 18 1174783148 LOGICAL
68 155751 18 1174783149 LOGICAL
68 155771 78 1174783150 LOGICAL
68 155851 78 1174783154 LOGICAL
68 155931 49 1174783158 LOGICAL
73 165758 1 1180191676 LOGICALSo, when I try to recover these blocks by using blockrecover command, I got the error:
RMAN> blockrecover corruption list;
Starting blockrecover at 27-SEP-07
using channel ORA_DISK_1
using channel ORA_DISK_2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of blockrecover command at 09/27/2007 10:22:10
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 73 found to restore
RMAN-06023: no backup or copy of datafile 68 found to restore
RMAN-06023: no backup or copy of datafile 67 found to restoreWhat can I do in this case?
Thank U very much!
[]´s -
How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button. Thanks!
Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way. -
How do you move photos NOT taken with ipod ONTO the ipod?
How do you move photos NOT taken with ipod touch ONTO the ipod touch - click and drag isn't working. Thanks.
You can sync them via the iPod's Photos configuration pane in iTunes. See here for more information and instructions.
iOS and iPod: Syncing photos using iTunes
B-rock -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
Error while cloning database using RMAN
hi there,
Here is our setup:
OS: Solaris 5.9
Database:9.2.0.3
While cloning test database from our production database using RMAN, we happen to get the following error..
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/11/2007 15:28:59
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 450
RMAN-06100: no channel to restore a backup or copy of datafile 449
give us a solution to rectify this problem.
Thanks,
Balu.Can you please post the RMAN restore script ?
where are the backups located
Maybe you are looking for
-
My iPhone 4S won't play certain sounds
I just got this as a hand me down from my boyfriend because he has the new 5, pretty great condition, played all the sounds, videos, musics, etc with no problems. I was playing a game earlier today with no issues, sound was great, and listened to mus
-
How to move files in background (asynchronous call)?
Hello I would like to make an an Asynchronous call to the Move.vi for moving files as a background process. I am having the following problems: - The static VI Reference as input to the Open VI Reference function asks for a path to the VI to be calle
-
Please search the forums before posting i want an example for variables using customer exit with steps Edited by: Arun Varadarajan on Mar 15, 2009 7:25 PM
-
I am not sure if this the right community or not but my son-in-Law's Samsung Network Extender has quit working and we can't get it working. We have reset the power several times. The Sys light just blinks red and the GPS light is solid red.mthis used
-
Kodo 3.3.4 Available
All, Kodo 3.3.4 is now available. Feel free to download it at: http://www.solarmetric.com/jdo/Evaluate/ There are a number of bug fixes in the release. You can find the release notes at: http://www.solarmetric.com/Software/Documentation/3.3.4/docs/re