How do I navigate from a movie clip back to a scene?

I am just starting with Flash. I am creating my own website
within a single scene built up of movie clips. Within Scene1,
frame1, I have a movie clip that is the animated introduction to my
site. i have attempted to add a gotoAndStop command to the last
frame within the movie clip in order for the scene to proceed to
frame2.
gotoAndStop("Scene1",2);
Can anyone explain why this does not work?

ragtoes wrote:
> I am just starting with Flash. I am creating my own
website within a single
> scene built up of movie clips. Within Scene1, frame1, I
have a movie clip that
> is the animated introduction to my site. i have
attempted to add a gotoAndStop
> command to the last frame within the movie clip in order
for the scene to
> proceed to frame2.
>
> gotoAndStop("Scene1",2);
>
> Can anyone explain why this does not work?
Give a frame some label name and use
gotoAndStop("labelNameHere");
Do not use scene names. Just labels...
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

Passing a variable from a movie clip to the main timeline

Hi,
I'm having trouble passing a variable from a movie clip in my
flash file to the main timeline.
I have a movieclip with the instance name IntroNav which
contains several buttons. Clicking a button sets the variable
"page" to a specific name, i.e. page = "home"
However, outside of the movie clip, on the main timeline I am
unable to call this variable, and "page" seems to have no value.
Can anyone tell me why this is and how to solve it?
Thanks

Umm, yes ... declare your variables correctly.
var page:String = new String(); //proper complete
var page:String; //strict typing
var page:String = "home"; //stirct typing with value
declaration
Do not declare the variable in your buttons, you would have
to do so in every button and be constantly resetting the value.
Declare it on the main timeline at the lowest level. You do not
need to use it as a _global, you just need to resolve your path
issues. You can 'set' the variable value from a button, without any
problem, but you have to call to the variable correctly.
You do not 'name' a variable as "_root.page" , the '_root'
refers to the lowest level of the SWF or the main timeline, as does
a call to ' _level0' (that's a zero). If the variable is declared
on the main timeline, and you're calling from the MC/button or
anywhere you can refer to the variable by calling to it by
the proper path of '_root.page'
To set the variable from any of your button/MC instances
call:
_root.page = "value"; OR _level0.page = "value";
But you must have the varibale declared on the main timeline,
and only once and the playhead should be stopped or it will reset
the value to the default upon looping.

I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone

On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.

I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

How do I navigate from a hyperlink on one page to an anchor within the tab widget?

Hi guys can you please assist me with that issue I am describing in the question: How do I navigate from a hyperlink on one page to an anchor within the tab widget? I assume that it is not working because the tab widget is truly just on one page and anchors work within a page but not a specific tab. Is there a way around that?
Thanks.

an interesting question. Anchors work across pages (global) without any problem. Do they work within tabs or any other widgets I haven't tried, but it looks like you have and without success. I can see the temptation for doing this, but if you think about it why would you? Set the anchor on the page next to the tab(s) and hey presto the user needs only click the tab to which the hperlink refers, nothing could be more convenient! Of course, if the user cannot relate the tab to the hyperlink there's a problem. Generally solved by titling (like if the hyperlink is cats, the tab should preferably read cats and not dogs)! It's the only work around i can think of. Hope it helps.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

Premier After Effects... How does one places the whole movie clip into AF?

After years of using Premiere, I’m looking at using After Effects. Premiere does most of what I need (I don’t need moving graphics and titles) but the masking and rotoscoping seems to be better in After Effects. I’ve started a great video by Tom Green at school. This is probably silly question- I don’t understand is how does one places the whole movie clip into AF? I only see 30 seconds or so of the 5 minute clip on the timeline in AF.

Ahh, thanks. I simply add more minutes (the length of the clip) into the "new composition".
A new problem: When I try a dynamic link with premiere AE says “Failed to connect to adobe Premiere Pro Dynamic Link”, but PP will link with AE. I just installed AF last week. Do I need to uninstall and reinstall them (along with the rest of the Creative Suite)?

HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

The article is
"How to extract audio from a movie file"
But it only tells you how to extract when you first drag the movie file into the project. This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
Here was my workflow:
Dragged the movie file into my project
I checked "Extract the audio track"
I shifted the "Movie Start Time"
Extracted audio track did not shift with the movie
I deleted the extracted audio and played the audio directly from the movie
Now, I need the audio extracted again at the current movie position
I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
Is this option still available, or has it been removed?

Solved:
I found the menu option for extracting or re-extracting the movie audio. BTW, the original article:
Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
Here's the menu command:
File>Movie>Import Audio from Movie
Cheers

How do i change from OS-X mavericks back to mountain lion

how do i change from OS-X mavericks back to mountain lion i dont like maverick and i want to go back to snow lion BUT I want all my stuff (pictures, docs, ect.) im running bootcamp with windows 8 also, and dont even work or load, it just keeps looping or restarting windows updates

Here's a reference: How to revert OS X back from Mavericks: Apple Support Communities

How do I exit from my email account back to the main menu page ?

How do I exit from my email account back to the main menu page?

In my previous post die should have been FIVE.
Some day we might be able to edit posts on our iPad.

How to link from a movie clip to main timeline?

My problem first appeared very simple, but I have spent a
while on it and can't think how to solve it. I must say that I am
very much an amateur in designing in Flash and ActionScript.
I created a movie clip containing an embedded video and a
sound clip. In the main timeline I inserted the movie clip into a
keyframe. When I found the movie clip didn't play, I discovered
that the only way of making it play was to place a Stop action in
the keyframe of the movie clip, and also set the whole movie to
loop. The Stop action stopped the whole movie from looping, but
instead made the movie clip loop. If the keyframe is on frame 456,
how do I make it advance onto frame 457 once the movie clip has
finished running?
I've tried various ways around the problem, including placing
a button inside the movie clip to Go to and Play frame 457, but
instead it plays frame 457 in the movie clip.
Can anyone help me with this please?

Hello,
You need to tell flash the "target" you want to play. If not
specified
it will think it is the target you are calling from which in
your case
is the movie clip.
So to go back and play one level up would be:
_parent.gotoAndPlay(457);
If the movie clip was inside another movie clip then it would
be:
_parent._parent.gotoAndPlay(457);
or you can just referent the root of the movie directly:
_root.gotoAndPlay(457);
Search the help file for timeline target and you should find
more about it.
Incubusguy wrote:
> My problem first appeared very simple, but I have spent
a while on it and can't
> think how to solve it. I must say that I am very much an
amateur in designing
> in Flash and ActionScript.
>
> I created a movie clip containing an embedded video and
a sound clip. In the
> main timeline I inserted the movie clip into a keyframe.
When I found the movie
> clip didn't play, I discovered that the only way of
making it play was to place
> a Stop action in the keyframe of the movie clip, and
also set the whole movie
> to loop. The Stop action stopped the whole movie from
looping, but instead made
> the movie clip loop. If the keyframe is on frame 456,
how do I make it advance
> onto frame 457 once the movie clip has finished running?
>
> I've tried various ways around the problem, including
placing a button inside
> the movie clip to Go to and Play frame 457, but instead
it plays frame 457 in
> the movie clip.
>
> Can anyone help me with this please?
>
>

As 2.0 class objects- how to swap depths of a movie clip

How do you bring an object to the top? if it's just a movie
clip, I could do a swapdepths, but if it's a movieclip that's part
of an AS 2.0 object, how do you swap depths of the whole object?
I create 2 objects (same class) which each have a movieclip
within them. The movie clip is created on a unique level with
getNextHighestDepth().
I have a button which tries to swapDepths of the 2 objects,
but I can't get it to work. Can anyone help?
here's the detail:
1. create a symbol in the library called "someShape_mc" and
put some shape in it - a circle, a square, whatever - this symbol
is exported for action script, and has an AS 2.0 Class of
"ClassObject" ( I also put a dynamic text field in the shape to
display the current depth - it's called "depth_txt")
2. create a button called "swap_btn" on the stage.
Frame 1 has the following actionscript:
var BottomObject:ClassObject = new ClassObject(this,100,150);
var topObject:ClassObject = new ClassObject(this,110,160);
// for the button add this:
Swap_btn.onRelease=function() {
// try it with the full path:
_root.BottomObject.__LocalMovieClip.swapDepths(_root.topObject.__LocalMovieClip);
// try it with with just the objects:
BottomObject.__LocalMovieClip.swapDepths(topObject.__LocalMovieClip);
// try it with the object as a movieclip
BottomObject.swapDepths(topObject);
trace("Did it Swap?");
// try it with a method in the class....
BottomObject.swapIt(topObject.__LocalMovieClip);
BottomObject.swapIt(topObject);
trace("nope... no swapping going on...");
================================
here's the AS file: "ClassObject.as"
class ClassObject extends MovieClip{
var __LocalMovieClip;
var __Depth;
function ClassObject(passedIn_mc:MovieClip,x:Number,y:Number)
__Depth = passedIn_mc.getNextHighestDepth();
__LocalMovieClip =
passedIn_mc.attachMovie("someShape_mc","__LocalMovieClip",__Depth);
trace("made a shape at " + __Depth);
__LocalMovieClip._x = x;
__LocalMovieClip._y = y;
__LocalMovieClip.depth_txt.text = __Depth;
public function swapIt(targetMc) {
__LocalMovieClip.swapDepths(targetMc);
__LocalMovieClip.depth_txt.text =
__LocalMovieClip.getDepth(); // no difference.
trace("Tried to swap from within the class...");
========================
so- the goal is to bring the "bottom" Class object on top of
the "top" object. The button tries various methods of swapping the
depths of the movie clips - but there is not one that works. What
am I missing?
tia
ferd

Thank you for your response - and here I have included the
code I reworked to show how it works, and doesn't work. you're
right about not needing the extra containers, but this example is
part of a bigger thing...
I'm confused - it works ONLY if I attach the movie outside
the class, even though the "attachment" occurs, I'm thinking, at
the same scope level, that is, _root.holder_mc, in both examples.
it seems that the advantage of having a class is defeated
since I have to do the extra coding for each object that will be
created. It's like the class can only have a reference to the
movieclip outside itself, and not have a clip INSIDE that is fully
functioning. am I right about this? Is there someplace good I can
learn more about class objects and movieclip usage?
also, my class object IS a movieclip, but " this.getDepth() "
is meaningless inside the class object. hmmm...
This one works..... attaching the movies at the root level
(to a holder_mc)
// Frame 1
tmp1 =
holder_mc.attachMovie("someShape_mc","tmp1",holder_mc.getNextHighestDepth());
var BottomObject:ClassObject3 = new
ClassObject3(tmp1,100,150);
tmp2 =
holder_mc.attachMovie("someShape_mc","tmp2",holder_mc.getNextHighestDepth());
var topObject:ClassObject3 = new ClassObject3(tmp2,110,160);
// for the button add this:
Swap_btn.onRelease=function() {
BottomObject.swapIt(topObject);
trace("clicked button");
// ClassObject3.as
class ClassObject3 extends MovieClip{
var __LocalMovieClip:MovieClip;
function
ClassObject3(passedInMovieClip:MovieClip,x:Number,y:Number) {
trace(" this class object is at ["+this.getDepth()+"]");
__LocalMovieClip = passedInMovieClip;
__LocalMovieClip._x = x;
__LocalMovieClip._y = y;
public function swapIt(targetMc:MovieClip):Void {
trace("do the swap in the class");
trace("===========================");
trace("target type :" + typeof(targetMc));
trace("__LocalMovieClip type :" + typeof(__LocalMovieClip));
__LocalMovieClip.swapDepths(targetMc.__LocalMovieClip);
This one does NOT work..... attaching the movies within the
class object...
// Frame 1
var BottomObject:ClassObject2 = new
ClassObject2(holder_mc,100,150);
var topObject:ClassObject2 = new
ClassObject2(holder_mc,110,160);
// for the button add this:
Swap_btn.onRelease=function() {
BottomObject.swapIt(topObject);
trace("clicked button");
// ClassObject2.as
class ClassObject2 extends MovieClip{
var __LocalMovieClip:MovieClip;
function
ClassObject2(passedInMovieClip:MovieClip,x:Number,y:Number) {
__LocalMovieClip =
passedInMovieClip.attachMovie("someShape_mc","stuff1",passedInMovieClip.getNextHighestDep th());
__LocalMovieClip._x = x;
__LocalMovieClip._y = y;
public function swapIt(targetMc:MovieClip):Void {
trace("do the swap in the class");
trace("===========================");
trace("target type :" + typeof(targetMc));
trace("__LocalMovieClip type :" + typeof(__LocalMovieClip));
__LocalMovieClip.swapDepths(targetMc.__LocalMovieClip);

How do I View Guides for Movie Clips in Relation to Entire Scene?

My boss purchased a flash animation from a company a few months ago that she now needs me to fix. The goal is to resize the animation to different dimensions for a new banner. I took the original file, brought up the document settings, and changed the size to the new one we need, and hit the "scale content" checkbox. The file I have after doing this is shown below; I have highlighted the shape I will be talking about in pink. Nothing is the correct size now so I am trying to resize them to fit the stage area. I am having trouble with the green shape that is highlighted Pink.
The person who originally made this file made that highlighted shape into a movie clip and then dropped it in to the main timeline. I was wondering if there was a way that I could see where that shape is in relation to the area of the entire stage and the other objects in the main timeline? Meaning if I am inside of the greenblock movie clip all I see is what is below:
With this view I cannot tell where that shape is in relation to everything else. I am hoping someone can tell me how to view the guides from my main file inside of this movie clip( I already have guides turned on), or any other way of seeing what size and where my shape is in relation to rest of the objects on the stage of my main file. I would take any option that would let me tweak the green shape inside of the movie clip and see in real time how it looks in relation to the rest of the items on the stage as I make changes.
Any suggestions on how to get perspective on where my movie clip is in relation to the stage and other objects on it would be greatly appreciated.
Sincerely,
Tissal

Somehow double clicking on your system seems to be connected to the command
fl.getDocumentDOM().enterEditMode('');//the view where you don`t see the rest of your stage
whereas normally it defaults to
fl.getDocumentDOM().enterEditMode('inPlace'); //the view where you can see everything els on stge alphablended
you can either create a shortcut to
edit>edit in place or alter the standard behaviour of your double click
or right click(Windows) or ctrl-click(MAc) the mc and choose Edit in Place

Accessing a scene from a Movie Clip

Hi, I'm using Flash CS3 and am writing action script inside
of one of my movie elements and I want to access an element that's
on my main scene, "Home". How can I reference my main form that
hosts the element video form my movie clip?

if "Home" is on the main timeline you can reference it from
any timeline using:

Controlling root time line from a movie clip

Hi
Ive been searching around for an hour or so and cant find anything that helping.
Im using cs4 and actionscript 2.
in my 2nd scene i have a movie clip with a roll over button inside, i need that button to control the root timeline and navigate around the site, how do i do this? this is what ive got and doesnt work -
on (release) {
_root.gotoAndPlay("main movie", 2);
thanks for any help.

Try using just a label name for the frame, no scene or frame number... Navigation for scene-based designs can be problematic. It will save you some issues if you design using just one scene.

How do I navigate from a movie clip back to a scene?

Similar Messages

Maybe you are looking for