How do I perform the interp3 function in matlab in LabVIEW

I have the following data attached (DTTT.txt). The four columns are as follows: Column 1, 2 and 3 are (fixed) measurement points and the fourth column is the resulting measurement data using these 3 points. What I need to do is find the value that should be in column 4 with the values in columns 1, 2 and 3 of (i.e. 0, 100 and 20). Is there any base function in LabVIEW for performing this interpolation? I would be using interp3 in matlab for this, but we only want to use strict LabVIEW code in this project (i.e. no external interface to matlab allowed). Thanks for any help I can get...
Attachments:
DTTT.txt ‏8 KB

There are quite a few interpolation functions in LabVIEW.
Go to
Function Palette
then
Mathematics Palette
then
Interp & Etrap Palette
and choose the VI that will work from there.
CLD | CTD
LabVIEW 2011 SP1 | TestStand 4.5

Similar Messages

How can I perform the LINEST function using the new version of Numbers? The old method of using "command enter" to complete the array function does not work. Please help ASAP!!!

LINEST function using Numbers for Mac

Thank you for your help. This page is somewhat helpful, but I still don't quite understand. I am using the Numbers program, and my assignment calls for me to use the LINEST function to return a set of 10 values.
When I googled how to do this, a lot of pages mentioned hitting "command+enter" to complete the array function, but they were using an older version of Numbers and it doesn't do anything when I try it in the new version. I tried using "Index" with LINEST, and i've managed to get about 5 values out of it.

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

I am using Windows 7 64-bit on a partitioned hard drive on a MacAir. The trackpad will only work with a click. How do I get the full function of tap and scroll?

I am using Windows 7, 64-bit on a partitioned hard drive on a 2012 MacAir. The trackpad only works with clicking. How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

Windows Control Panel>Boot Camp Control Panel>Trackpad.

Cannot save any changes - Microsoft Forefront 2010 for exchange is unable to perform the requested function

HI, I have Forefront 2010 for Exchange installed for an Exchange 2007 SP2 running on Windows 2003 x64 SP2. Exchange has all roles installed on the same server.
When I try to save any change on Forefront I got the following message:
Microsoft Forefront 2010 for Exchange is unable to perform the requested function. This may be because Forefront services are unavailable. Ensure that all Microsoft Forefront services are running and that WindowsPower Shell is functional
Well, our FF services are running and PowerShell is functional. I checked some forums and found some problems when there is entries in the IP Allow / Block lists in Exchange UI. I removed those entries but problem remains.
Any ideas would be appreciated.
Xavier Villafuerte

In my case, I was able to work around this issue by using PowerShell directly. For example, to run an on-demand scan for all mailboxes, this worked:
#open EMS
$aliases = (get-mailbox -result unlimited).alias
Add-PsSnapin FSSPSSnapin
set-FseOnDemandScan -MailboxList $aliases
Start-FseOnDemandScan -EnableVirusScan $true
Windows 2008 R2 SP1
Exchange 2010 SP3, RU9
PowerShell 4.0 present on the machine (though EMS runs PS 2.0)
Forefront PowerShell cmdlets:
https://technet.microsoft.com/en-us/library/cc482986.aspx
Mike Crowley | MVP
My Blog --
Baseline Technologies

Microsoft forefront protection 2010 for exchange server is unable to perform the requested function

I get the following error any time I try and change any setting:
Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Microsoft ForeFront services are running and that Windows Powershell is
functional.
I have installed the latest rollup for SEP. Rollup 5 I think. I have rebooted the server. I have checked the permissions and they are correct.
Any thoughts?

I posted a PowerShell-based workaround in the other thread:
https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
Mike Crowley | MVP
My Blog --
Baseline Technologies

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

How do I get the tint function to work in CS5?

I rrecently installed CS5 In Design in Windows 7. How do I get the tint function to work?

This is how you create a tint:
If it's not working, you might try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

How do I enable the blue function keys on an old Pavilion N5445 with Windows XP?

Yes, how do I enable the blue function keys on an old Pavilion N5445 with Windows XP?
The blue function keys currently do not work.
There is NO mention of the function keys (or even action keys) in the BIOS.
Let me repeat that so that nobody posts a stupid link to how to turn on the function keys in the BIOS. THIS IS AN OLDER LAPTOP.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
Somehow the function keys got turned off. So I suspect there's a way to turn them on again.

HI Lukon:
Thank you for your post. I will do my best to assist you in this endeavor!
I regret that you are experiencing an issue with the function keys. I am providing you with a link to "Configuring the Multimedia and Internet Keyboard Buttons in Microsoft Windows 98, Me, and XP" click here. Have you tried running the HP Support Assistant to look for updates and resolve issues. click here. Have you tried the MS Fix it tool click here to aid it resolving it. I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Mail locked up because of sending problem. How do I stop the send function?

Mail locked up because of sending problem. How do I stop the send function?

Didn't help. Wound up talking to A Support & deleting the cache in my Library Mail file then restarting. Thanks anyway.

HT4539 How do ypu perform the "IOS update" required to get ringtones on my cell?

How do I perform the "IOS update" required to get ringtones on my cell? I can't figure it out through the ITunes store....

Welcome to the Apple community.
If an update is available for your device, connect it to iTunes and use the update feature.
However, you do not need to update your device in order to use ringtones. Simply select the ringtones you wish to sync to your device from the Tones tab in iTunes on your computer when your device is connected to it, and perform a sync.

How do I get the Speech function for accessibility to work in the Windows 8 version?

How do I get the Speech function for accessibility to work in the Windows 8 version? There is no "File" option where you would normally find it. I tried using Narrator from Windows however it cannot read "explorable text" I guess

Adobe Reader Touch (Windows Store app with "modern" UI) is not really accessible.
If you have a device running the Windows 8 operating system (as opposed to the Windows RT operating system), you can install and run Adobe Reader XI (desktop app with classic UI), which offers better accessibility support for screen readers. It also has the "Read Out Loud" functionality.

How can I determine the liquid level in a bottle (LabView Vision)?

How can I determine the liquid level in a bottle (LabView Vision)? Does anybody have an example code? The task is, that if liqid level is between two predetermined level, the program writes, that it is correct else it writes incorrect. Thank you.

here is a little play with your bad picture:
used only the small field of interest (here a guess) ,
used only the red channel ( takes out most of the light reflection)
grey scale, 3x(blurr, median filter) , played with contrast -gamma - saturation
now you need to add the edge detection and some sort of scale.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

How do I use the WriteToMemoryXX functions in a CIN?

I'm getting a linker error "unresolved external reference _WriteToMemory16" when I compile the C code that contains the calls to the WriteToMemory16 function. I've installed the accesshw files and am including the accesshw.h file in my C-code CIN. It would seem that I need to compile-in the code for the WriteToMemory function, which I assume resides in accesshw.c.
My application calls for some direct hardware i/o that falls in the "too messy to do in a block diagram" catagory. I'm using Labview 5.1.1 and talking to a Keithley Metrabyte PIO-96 card.
Thanks very much for any assistance.

Ben,
Thank you for the response. I looked at the examples you mentioned, but unfortunately I'm still unsure what to do. As mentioned, I downloaded the accesshw.zip file and installed the files in order for me to use InPort and OutPort VIs in my program on an NT box, which I'm doing and is working fine. Also, I downloaded the example, "PCI-DIO using AccessHW_DLL.c". This C file contains calls just like the ones I want to use (calls to WriteToMemoryXX) in my CIN C code to basically do the same operations as are done by the InPort and OutPort VIs. Is there a makefile available for that C file? Maybe if I knew how to build that file into a CIN, it would be the same process for me to build my file into a CIN. There is an include file in the "PCI-DIO using AccessH
W_DLL.c" file that I don't have (ansi_c.h), but I don't get a compiler error when not including this file in my C file so
I assume I don't need it. I've got the accesshw.dll file in the same directory as my .c file, as instructed to do on the accesshw.zip download page.
I'm developing the CIN using MSVC++ 4.0 if that helps.
Thanks very much,
Jeff

How do I use the TRIM function in my Query?

I have a field that has called AP.service_user_defined_1 that houses a Code the code is like Alpha Num ie "AA01" then it has about 30 to 40 whites spaces and then the description of what the code means. I need to have the description to show in my report I don't necessarily need the code but I do need the description I tried putting the TRIM Function in as below and it will not work what do I need to do to correct this?? I need help ASAP this is due today! Thanks for any help!
SELECT DISTINCT
          A1.AUTH_NUMBER,
PM.LAST_NAME,
          A1.AUTH_TYPE,
          A1.PLACE_OF_SERVICE,
          A1.OVERALL_STATUS,
          A1.CLOSED_REASON,
          A1.DENIED_REASON,
Case
when A1.DENIED_REASON in ('HS001','HS002') then 'MED NECESS'
when A1.DENIED_REASON in ('HS004','HS005','HS006','HS007','HS008','HS013','HS014','HS016','HS017','HS019','HS020') then 'Admin Denial'
when A1.DENIED_REASON is NUll and ap.advisor_decision = 'AAPPR' then 'Approved'
else 'Unknown'
end DENIED,
A1.admit_primary_date,
A1.service_admit_type AS "IP ADMIT TYPE",
A1.service_user_defined_1 AS "OP Serv Type",
Trim (leading ('AA01                 ',)from dual,
ap.contact_date,
AP.decision_date,
AP.ADVISOR_DECISION,
PM.PROVIDER_ID,
     A1.INSERT_DATETIME,
TO_CHAR (A1.insert_datetime,'MONTH-YY')AS "Month",
A1.admit_primary_date,
          A1.ACTIVE_PHYSICIAN_ADVISOR,
          MV.LINE_OF_BUSINESS
FROM Windsoradm.auth_master a1
INNER JOIN Windsoradm.auth_phys_advisor ap
ON a1.auth_number=ap.auth_number
INNER JOIN windsoradm.prov_master pm
ON ap.seq_prov_id=pm.seq_prov_id
LEFT JOIN windsoradm.note_master nm
ON nm.seq_memb_id=a1.seq_memb_id
INNER JOIN windsoradm.member_mv mv
ON mv.seq_memb_id=a1.seq_memb_id
Where mv.Line_of_Business <>'SFS'
/*AND A1.PLACE_OF_SERVICE IN ('11','21','22','24')*/
/*AND a1.active_physician_advisor = 'Y'*/
/*AND (a1.closed_reason ='A06' OR a1.closed_reason is Null)*/
AND a1.insert_datetime Between To_Date ('04/01/2012', 'MM/DD/YYYY') and To_Date ('04/30/2012','MM/DD/YYYY')
ORDER BY 1

I don't know how to use this within my query I put it in as you suggest and get an error: I'm new to these functions can you show me how within my query I should code it? The field Name is A1.service_user_defined_1 There are about 50 Different Codes in a Drop down list within the application that have a different Code and Different Description it appears that the Codes are all 4 character alpha numeric then about 25 to 45 spaces and then the description. Please show me in my code how to get this I wish there was a table I could link to that housed both code and description but who ever created this did not make life easy. Thanks (I also tried the TRIM but could not get it to work ) I know it is because I do not know how to put it within my code to make it work.
SELECT DISTINCT
          A1.AUTH_NUMBER,
PM.LAST_NAME,
          A1.AUTH_TYPE,
          A1.PLACE_OF_SERVICE,
          A1.OVERALL_STATUS,
          A1.CLOSED_REASON,
          A1.DENIED_REASON,
Case
when A1.DENIED_REASON in ('HS001','HS002') then 'MED NECESS'
when A1.DENIED_REASON in ('HS004','HS005','HS006','HS007','HS008','HS013','HS014','HS016','HS017','HS019','HS020') then 'Admin Denial'
when A1.DENIED_REASON is NUll and ap.advisor_decision = 'AAPPR' then 'Approved'
else 'Unknown'
end DENIED,
A1.admit_primary_date,
A1.service_admit_type AS "IP ADMIT TYPE",
A1.service_user_defined_1 AS "OP Serv Type",
regexp_replace('AA01 Behavioral/Mental Health Service', '^[^ ]+ +')from dual,
ap.contact_date,
     AP.decision_date,
     AP.ADVISOR_DECISION,
          PM.PROVIDER_ID,
     A1.INSERT_DATETIME,
TO_CHAR (A1.insert_datetime,'MONTH-YY')AS "Month",
A1.admit_primary_date,
          A1.ACTIVE_PHYSICIAN_ADVISOR,
          MV.LINE_OF_BUSINESS
FROM Windsoradm.auth_master a1
INNER JOIN Windsoradm.auth_phys_advisor ap
ON a1.auth_number=ap.auth_number
INNER JOIN windsoradm.prov_master pm
ON ap.seq_prov_id=pm.seq_prov_id
LEFT JOIN windsoradm.note_master nm
ON nm.seq_memb_id=a1.seq_memb_id
INNER JOIN windsoradm.member_mv mv
ON mv.seq_memb_id=a1.seq_memb_id
Where mv.Line_of_Business <>'SFS'
/*AND A1.PLACE_OF_SERVICE IN ('11','21','22','24')*/
/*AND a1.active_physician_advisor = 'Y'*/
/*AND (a1.closed_reason ='A06' OR a1.closed_reason is Null)*/
AND a1.insert_datetime Between To_Date ('04/01/2012', 'MM/DD/YYYY') and To_Date ('04/30/2012','MM/DD/YYYY')
ORDER BY 1

How do I perform the interp3 function in matlab in LabVIEW

Similar Messages

Maybe you are looking for