How do I pinpoint the program execution?

Hi all,
I am wondering how to pinpoint the program's execution point? I have a problem with all of the loops not stopping properly. I hit the "Hilight Program execution" and it went to one loop, that is, it appeared greyed out, but I can't figure out which case it's stuck in. Is there a way to find the exact *point* of execution?
Thanks,
Jason

You can use breakpoints. The program will pause as soon as it hit the breakpoint. To add breakpoints, right-click in the place where you want it and set it. You can also set probes. The probes activate as soon as the information is available. Then you can be creative with the highlight execution, breakpoints and probes. You can have a fairly good idea on how your program is executing.
Otherwise, try posting your code or an image of your code so we can try to figure out what is going on.
www.vartortech.com

Similar Messages

How can I start the program without the run button

How can I start the program the instant i open the vi?
without the use of Run.
Thanks
Solved!
Go to Solution.

Under vi properties, execution, click run when opened like in Jeff's screen capture below . Don't post any code set to run when opened to the forums!
=====================
LabVIEW 2012

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanks

So, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a

A gap between letters started to show in my indesgn files. tried to undo with tracking, the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?

a gap between letters started to show in my indesign files. tried to undo with tracking, then with the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?
for example: say i write a paragraph. then, in a weird some sort of way an involuntary gap suddenly appears between different letters of random words(i did not recognize any pattern to the gap appearing) throughout the entire paragraph. once i've double clicked on that paragraph, and made a minor change, lets say tapped a 'space' key, and then clicked ctrl+z to undo, it has aligned(or fixed) the entire paragraph and made it look ok again. i've tried numerous ways to undo the entire thing, but cannot find the reason. i've been working for a few years and there's no reason why this thing all of a sudden should happen right now.
if anyone has stumbled on something like that and can advise, i would welcome it.
MNS-KG
Vadim

yep...i'm typing with hebrew. i'll make a printscreen with the settings you've asked for@:
if you look closely you'll see that almost every line has a single letter apart. in hebrew there is no usually a singe letter structured words.

How can I find the program which is calling my SAPscript??

How can I find the program(std/Custom) which is calling my SAPscript form??
Regards,
Shashank.

Hi
check in NACE transaction or TNAPR table
reward points to all helpful answers
kiran.M

I have downloaded elements to my mac and it has installed. how do I run the program?

I have downloaded elements to my mac and it has installed. How do I run the program.

Hi David,
You can simply click on the application to launch it from the 'Applications' folder.

How can I set the program to automaticaly send recieved email addresses to my address book?

As the question asks, how can I set the program to automatically add new email address from messages to my address book. Other email programs can be set up to do this. If this can't be done in Firefox, why not. It's the best email program otherwise.

First off Firefox is an Internet browser and does not deal with email addresses or have an address book to add them to. Secondly I cannot think of a good reason to add the address of each piece of spam to the Thunderbird address book.
There are addons that will pick out addresses from incoming email and add them to the Thunderbird address book. I suggest you search through the add on list for one that fits your needs.

Downloaded the pdf converter to word....how do I run the program?

downloaded the pdf converter to word....how do I run the program?

Hi seang449,
Please let me know which software you purchased and for what OS? Is it Adobe Acrobat or Create PDF service?
After downloading the software you need to run the .exe file (WIN) / .dmg file (MAC) to install the application.

Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

Ask whom/wherever you got the redemption code from for one that has not already been used.

How to make add the program system.out messages to a applet text field?

How to make add the program system.out messages to a applet text field?
System.out.println("I wanna displany this message on a applet text field, thanks");

You may wish to change the output destination to a JTextArea. Please have a look at this link that likely shows what you want:
[http://forums.sun.com/thread.jspa?forumID=54&threadID=640376|http://forums.sun.com/thread.jspa?forumID=54&threadID=640376]
If you need other examples, search the forum. I found the search terms -- redirect system out textarea -- very helpful.
Good luck

No yellow bar comes up when trying to allow adobe flash reader so how do I allow the program to be downloaded?

The instructions for downloading Adobe flash reader state that a yellow bar will appear int he tool bars and just click allow. No yellow bar appeared so I could not figure out how to download the program. How do I allow the program to be downloaded?
== This happened ==
Every time Firefox opened

The instructions on the Adobe site are out-of -date and do not apply to current versions of Firefox. Use the following instructions to install or update Adobe Flash.
'''Install/Update Adobe Flash Player for Firefox''': your ver. N/A; current ver. 10.0 r45
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-double-click on the Adobe Flash installer you just downloaded to install it
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
Also see:
http://kb.mozillazine.org/Flash
[[How do I edit options to add Adobe to the list of allowed sites]]
'''''Other Issues''''': to correct security/stability issues
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

I installed the Adobe Creative Cloud, now how do I acess the programs I downloaded?

I downloaded Adobe Creative Cloud , now how do I acess the programs I downloaded like Illustrator etc..?

Well, downloading and installing the desktop client isn't enough... Open the CC client on your computer, click 'Apps' and click the blue install-button next to the programs you want.
When it's done installing, it will notify you and start installing the next program you selected. And then...Where do you normally have your apps on your computer?
If you're on a Mac: Applications... They are right there. Or hold command+space bar (spotlight search), enter the name of the app, like 'Photoshop'
If you're on Windows: Startmenu > Adobe CC > Photoshop CC

How do you make the program start?

I have installed PSE 11 twice, now; the second time after an uninstallation of the first installation. Both times, the program started immediately FROM the installation. After exiting from the program, I have not been able to restart the program. I click on it; I double click on it (which should start 2 copies of the program!); I right click and click Open; I right click and click "open as administrator". Absolutely NOTHING happens. Is there some sort of glitch that means you have to leave the program open permanently? Please, how do I open the program?
Thank you.
Cherie Brumfield

Thanks so much for responding. As it happens, I had already tried that
approach, with no results. I also spent some time last evening with a tech
on the Adobe Chat page, also with no results. So I just reloaded my PSE 8
program, which does still work! And this morning I get a notice of an
Adobe update to PSE 11 and, guess what?!--NOW PSE 11 works just fine!! Go
figure!
All of which has nothing to do with you having responded to my plea for
help. I really appreciate someone responding; it's nice to know that
people "out there" really do care. Thank you.
Cherie
On Wed, Feb 6, 2013 at 4:55 AM, bridge_mastero

How do I pinpoint the program execution?

Similar Messages

Maybe you are looking for