How do I place an arrow into the video?

I am using FCE pretty well. However, how do I insert an arrow as an overlay into the video. When I select objects, all I get are squares, circles. Why isn't this as simple as keynote?

There is another way but can't take you too far. At the bottom right-hand corner of the Viewer window is an A with a drop down arrow. Click the arrow and select Matte. Do it again and select Shape, Circle. Drag the resulting video in the Viewer to the V2 line in the timeline. Now you can play with the size, opacity, etc using the Controls tab in the Viewer. But I gotta leave you there because it is as far as I've gotten. I know you can make a moving circle to show movement over, for instance, a map. But I'm stalled out right here.

Similar Messages

How do I Place an image into the center of an activated artboard in CC?

I have just upgraded to CC from CS6. In CS6, I could activate an artboard (double click it in the Artboard panel) and then Place an image, which would by default go into the center of the artboard.
With CC, it "loads" the image into the cursor which I then need to Place by clicking somewhere.
How can I get it to either behave as it did in CS6, or customize to load it into the center when I click, such as with a modifier key?
Thanks!

Hi,
With the Window > Allign panel,
You can select the option to allign to selection or to Artboard.
When you select "to Artboard" you schould be able to use the Allign option to get it centerred.
See preview bellow.
Hope this helps.

How do I place a file into the body of the email rather than as an attachment?

I sometimes want to include a file, such as a "card" into the body of an email rather than as an attachment so that it appears immediately upon opening the email. I did this successfully at Christmas, but cannot remember how to do so now.

The email specification doesn't allow that. PDF files, as for any content other than text or HTML, has to be sent as a link or an attachment.

Im trying to place an arrow into iMovie, but picture in picture doesn't appear, replace or insert comes up instead?

Im trying to place an arrow into iMovie, but picture in picture doesn't appear, replace or insert comes up instead? Im trying to make a highlight video and I cant place an arrow into picture on picture, I used to be able to untill I updated my IOS.
Any help would be great! thanks.

Make sure that you have enabled (checked) Advanced Tools in the General tab under the iMovie menu item "iMovie>Preferences".
Also, a Picture-in-Picture (PIP) can be inserted only into clips in a project - not clips in an Event.
John

How do you load artworks automatically into the indeisgn CS3

Hi All,
How do you load artworks automatically into the indeisgn CS3. Is it through a script or any other way.
Thanks
Devakanth

"artworks" is a bit vague...can you expand?
File > Place is the usual way, but there are times when cut and paste is fine or better.

I have exported movies from old digital camera - how do I ensure it goes into the correct year (eg. 2005) Thank You

Some exported movies from old digital have gone into the incorrect year. How can I move them around into the correct year or at the very least move them in the current year but in chronological order eg under 2011 I have listed them as 2004 - blah blah, 2005 blah blah but they are "all over the place". Thank You

There are two ways to do this.
The simplest is to right-click on the clip in the Event and modify the date.
See iMovie Help here http://help.apple.com/imovie/#mov3ac6c398
If you have a long clip that you would like to split into smaller clips, there is another way. You can drag the long clip into a free tool called MPEG Streamclip from Squared 5. In MPEG Streamclip, put your playhead on the in point of your first smaller clip and type I. Then set the playhead on the out point of your first smaller clip, and press O to set the out point. Then FILE/EXPORT TO QUICKTIME. If your clip is DV, As you save the clip, rename it in the form clip-yyyy-mm-dd hh;mm;ss.ext, where the word "clip" must be lower case. YYYY is year. hh is hours in 24 hour time. Then repeat this process until you have all your smaller clips made. Finally, you can import all these clips into an iMovie Event using FILE/IMPORT MOVIES.

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

How do I share files uploaded into the Creative Cloud with other creative cloud members?

How do I share files uploaded into the Creative Cloud with other creative cloud members?

Should be easy. Try this...
In Thumbnails view, click the little triangle (pointing downward) in the lower-right corner of the asset you want to share.
In the blue icon bar that appears, click the Share icon (the third icon from the left, just right of the trash icon). The Share dialog should pop up.
In the Share dialog, enter the email address of the person with whom you want to share the asset, then click the Send Email button - they'll receive an email with a link to your asset. OR
You can also copy a link to the asset and then paste that into your own email client if you prefer. To do that, click the Link icon (looks like a "chain", and is to the right of the email "envelope" icon) - then click the Copy Link button.
Note that the Share options won't be available if your asset is set to "Private" - you can control whether an asset can be viewed (or downloaded) by others by clicking the Public/Private control (green or red "lock" icon).
You can also access the same Share controls if you click on the file to see it one-up (you can do this from either Thumbnails view or List view); click the Share icon near the upper right corner of the browser window (to the right of the asset name).
Hope that helps.

After creating a new user account, how do I move my files into the new user?

I have an issue where my 'Desktop/Screensaver' prefs seem to be corrupt somehow. When I click on that icon in System Preferences, it stalls and I get the spinning ball, thus resulting in a force quit. After reading a Mac Format magazine where someone wrote in with a similar issue, they said to trash various prefs (did that and made no difference) and if that didn't work, try creating a New User account (therefore creating brand new system prefs) and move your stuff over.
Well, I've created the New User account, but I can't figure out how to move/copy my stuff into the user folders. After copying and attempting to move stuff in, I see folders with a red circle with a white line through it (like a 'no entry' sign).
Any clue as to how this can be done? All I'm trying to do is to reinstate the system prefs so they are not corrupt anymore on my log-in.

No. Not the main Library folder. Make absolutely sure you are in the Home Library folder and not the main Library folder.
Your Home Library folder is hidden in Lion. To get to it, in the Finder menu, select GO and hold the option key down. Select Library in the submenu. The Finder window will open in your Home Library. This is where your user prefs are stored.
Once there, you will see the Preferences folder. Open it up, select all items within it and move them to the trash. You will need to restart in order for the new Finder preferences to be recreated.
Once you restart, then you will be back to the default preferences to the system and all applications. And yes, it will affect all settings including your Dock, just as logging into a new user. You will have to reset everything there also.
If you wish to do a selective method, instead of deleting all preferences, try deleting the one associated with your problem. Screen saver problems should be affected by the system preferences, so try deleting this:
com.apple.systempreferences.plist
com.apple.systempreferences.plist.lockfile
Note that when you delete system file preferences, a restart will be required. For applications, just quit the application before trashing preference files.

How to add a filter/selection into the report title?

Hi experts,
Currently I try to fugure out how to set up a field into the page header (title) of a report in order to dynamically adapt the title to selected filter criteria. I tried to use the Reprot Filter Summary, but since I do have several sheets in my reports the information given through it is not applicable.
What I would like to achieve is that the end user can select e.g. a category X and Y and the title says: "Report title - categories: X,Y" Somthg like this. I'd appreciate any tips.
Best regards

Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards

How do I place a SubReport on the last page of a report?

Post Author: KPichelman
CA Forum: Crystal Reports
I am using CR 9.0 and C# to create a report. Now I need to place a subreport (a signature box) on the last page of the report and I seem to be having difficulties. I will not know the number of pages until runtime which I seem to be able to get using:
int rptLastPageNum;ReportPageRequestContext req = new ReportPageRequestContext();rptLastPageNum = oReport.FormatEngine.GetLastPageNumber(req);
Now, how do I place a subreport in the lower right corner of page "rptLastPageNum"? Is it possible to do it in the report itself or is there a way to do it in my C# code? One solution would be to put it in the footer of the report but unfortunately that doesn't work for us as there is another subreport to the left that will need to be shown next to our subreport, not above it.Thanks!!

Post Author: heathdallison
CA Forum: Crystal Reports
have you tried making a section in your report footer to hold your subreport and then using the section expert to make that supress using something like:{current page number} < {total page number}

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

How to import jar & exp file into the eclipse 3.1 + jcop

hi, I am new to the javacard technology.
I have implementing applet by using eclipse 3.1 + jcop plugin.
recentlly, i got jar and exp file from someone. and I have to import given two files in the my applet.
Q1. but i don't know how to use(import) two files into the elipse.
and...
I have tried to put the export file structure in the build path, but I am still getting the same error:
Q2. "resolving constant-pool of clazz cash/ccash; failed: no such clazz cash/ccash;", what means?
anyone help me~plz!
many thanks..
lsh.
Message was edited by:
neonoble

1) In the Package explorer right-click the project you want to import the jar files into.
2) Click import
3) Select Archive file in the Import dialog box and click next
4) Browse to the jar file and select it
Socx

How do I get my file into the time line in Premiere Pro CC?

How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

Hi Aneumann,
Welcome to the Forums.
You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
Regards,
Vinay

How do it get my contacts into the cloud contacts for siri to recognize

I've looked through the Siri help stuff, and there' slots of things that tell me to put my info/contact into Siri at Settings / Siri / My Info. Great, but when I select that, I get an "All icloud" contact list. Since I have mself, wife, colleagues already in my contacts (MS Exchange) already -- how do I simply "copy" them into the icloud contact group???? I certainly don't want ot have to re-enter them twice. Also, I'm on a PC, is there no web interface from my PC to my icloud account? Any help greatly appreciated -- I'm obviously on the new 4S ...

Welcome to the Apple community.
If you deleted your contacts from your contacts app, they will also be deleted in iCloud.
However if you deleted your account or simply turned contacts syncing off, you should be able to log back into your account or re-enable contacts syncing and they would repopulate your contacts app.
Could you perhaps tell us which of these you have done.

How do I place an arrow into the video?

Similar Messages

Maybe you are looking for