How do I programmatically access the Color Highlight options in a chart?

I want to access the information of which bars are highlighted under which conditions in my bar chart. Is there a way to programatically access this info, either with the RAS API or the old Engine.ChartObject API?
Thanks in advance!

The Chart object is a third party product and unfortunately, at runtime, you are quite limited with what you can do with the chart object. There are no API's available in any version of CR to get to the line colors and other options. See htis thread for more details:
https://forums.sdn.sap.com/click.jspa?searchID=17899026&messageID=6102644
Ludek

Similar Messages

How do I programmatically reference the current page in 902?

Hello,
How do I programmatically reference the current page in 902?
The Portal Smart Text option for Current Page is not flexible enough, and I wish to create my own custom greeting using PL/SQL.
Cheers,
John

hi,
If you are developing a PLSQL Portlet, then you do have a way for getting the page URL.
The page URL can be obtained from the record, portlet_runtime_record. There is a filed page_urlavailable with portlet_runtime_record.
The portlet_runtime_record is passed as a argument to the show_portlet procedure.
--Sriram

How can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone 4G?

how can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone?

Yes you will need to NAT at some point to go from private to public address space. Here is a basic configuration if you are interested:
interface F8
ip nat inside
interface G0
ip nat outside
ip access-list standard NAT
permit 192.168.11.0 0.0.0.255
ip nat inside source list NAT interface G0 overload

How do we programmatically "enable" the Page to have

Some body known how do we programmatically "enable" the Page to have
Item level security. - analogous to checking the box in the Page edit mode for "Enable item level security"
J.

Try this. It might work for you.
declare
     l_page portal.wwsbr_api.page_record;
begin
     select * into l_page
     from portal.wwv_user_owned_corners
     where siteid = <page group id>
     and id =<page id>;
     -- 0 is disabled . 1 is enabled.
     l_page.haveitemsecurity := 1;
     portal.wwsbr_api.modify_folder(
               p_page => l_page
     wwpro_api_invalidation.execute_cache_invalidation;
     commit;
end;
regards
Suresh.

How to remove or change the color of hair in a beard? [was:does anyone know]

how to remove or change the color of hair in a beard

There are many ways to do that and there are many free tutorials on the web for doing that in Photoshop.

How do a client access the WAR file at loading a URL?

I would like to apprehend that how do a client access the WAR file at loading a URL?
Actually a web containter,for example,servlet container can have the software tool such as iPlanet[tm] Application server to deploying the servlet classes and JSP files by containing the WEB-INF directory.
how could the process of request and reponse be done by employing the WAR file..plz steer me....

clients don't access a war file. that's just a package for the container to deal with.
when the WAR is deployed, the container unpackages the contents and deploys the app. From that point forward clients use the deployed stuff. the unpackaged servlets handle requests from then on.
your question makes little sense to me.
%

How to remove and change the color of Java cup and border

Hi to all,
How to remove and change the color of Java cup and border.
Thanks in advance
khiz_eng

This is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.

How can we access the 'print booklet' options in CS6 without a printer online?

I cannot access the print setup option in ‘print booklet’ in CS6 to change the paper/image orientation from portrait to landscape. I am trying to save it as a .ps file so I can take a print ready pdf to the printers. But the resulting pdf that saves now is cropping my A4 (to be A5 after stapled) 2up saddle stitched booklet. As in the spread stays landscape, but the A4 paper in portrait. Can anyone help me please?
*sooooo frustrated*urgent*

thats the fix i was loooking for!!!! i found it just bedore i saw your reply though. but thanks a bunch!!!!!!!!!
for anyone else who might be looking for the same thing this video helped me and has a link to file you need - http://www.youtube.com/watch?v=D0Ogk-uBHls

Access the X-axis value from Flash Chart

Hi,
Is there a way I can access the X-axis value from Flash Chart to populate a report in another page? My X-axis is not a direct column in the table it is computed in the query.
X-axis is MON-YEAR computed from the Begin_Date column. I want to capture the MON-YEAR clicked by the user to populate a report for that Mon-Year.
Here is my chart SQL.
select 'f?p=&APP_ID.:18:&SESSION.:::::::' link,
to_char( "VIEW"."BEGIN_DATE",'MON-YYYY') label,
sum(decode(TYPE_Id,2,Value,0)) "Value-1",
sum(decode(TYPE_Id,1,Value,0)) "Value-2"
from "VIEW" where to_char( "VIEW"."BEGIN_DATE",'MON-YYYY')= to_Char(sysdate-100, 'MON-YYYY')
group by to_char( "VIEW"."BEGIN_DATE",'MON-YYYY'),
to_char( "VIEW"."BEGIN_DATE",'YYYY')
order by to_char( "VIEW"."BEGIN_DATE",'YYYY')
Any suggestions?
Thanks

Thanks Marco..
I did the same thing. I found this info at Re: Charts and links
in the forum.
Thanks for the help again.
Nimmi

How can I programmatically change the fill color Settings of the Cwslide ActiveX Controls

In design mode (Visual Studio 6.0),I want to programmatically change the fill color in properties of cwslide ActiveX Controls.what's the command?
Attachments:
cwslide.JPG ‏11 KB

First, if you want to start getting beyond the basics with DAQ, you are going to have to stop using the DAQ assistant and do it with lower level DAQmx VI's. There are hundreds of examples in the example finder. You can even right click on the DAQ assistant and select open front panel. That will create a subVI that you can open and see what is going on behind the scenes. Do it. I think you'll find the DAQ task is being recreated on each (though I'm not 100% of how the settings are established or maintained in each section of that subVI).
The second problem is you have a bit of a race condition on iteration 0. Those two DAQ property nodes are running at the same time. So when you read the AI.Max, it may be happening before or after the AI.Max is set in your case structure.
Third, make sure you wire up your error wires.

How do I get more color highlighting options in preview, how do I get more color highlighting options in preview

The new version of Preview on Mountain Lion has limited the colors available when using the annotate tool (highlighter), how can I access more options?

Preview used to allow the user to select highlight colors from the color picker. This is no longer the case.
I have requested that Apple add it back at http://www.apple.com/feedback/macosx.html.
See also https://discussions.apple.com/message/19307157.

How to change the color of bar in bar chart

Hi I'm
using Crystal Reports 2005 with Visual Studio 2005. How do i change the color of the bar in a bar chart, i don't see any options, someone telling in the forum that i can simply right click on the bar and choose color, but i don't get that option. all i can select is the entire chart object.
any help is greatly appreciated.
Thanks
yesvee

You have to make sure that you select the correct part of the bar.
For Example: When you click on the outside of the chart, the entire chart will be selected. Clicking somewhere inside the chart will also highlight the entire chart, but to highlight a specific bar or line you have to click until only that part is highlighted.
Once you have the bar or series highlighted, right-click on the highlighted section and then select Chart Options, or "Format Series Riser" and you should be able to change the colour of the bar/line.

How can i dynamically vary the color of one graph line

I was looking on the developer zone and noticed several people are looking for a way to change the color of one graph line. Simplest case I would like to know: a graph is running, then you press a button and from that point on the color of the graph changes, but doesnt change the old data line color. THis way the line will consist of different colors.
The property node changes the whole line, and the line is always just one color. It should be possible to make the line consist of different color sections, anyone know how?

The application is actually not as slow as it seemed, i had some settings set wrong (anti aliasing in plot, and some functions in advanced, when you right click on the graph)
Especially unchecking the anti-aliasing makes it much faster
Also, just plotting point and not a line, or alternatively, changing the interpolation makes it faster.
Anyway, the attached files do not rely on processor so much anymore, see for yourself
Attachments:
multicolor_looking_plot.vi ‏99 KB
multicolor_looking_plot_2.vi ‏105 KB
multicolor_looking_plot_3_truncated_array.vi ‏99 KB

How can I always change the color of certain letters?

I know that sounds weird. But hear me out.
I was reading an article about synaesthesia, and it seems that reading with certain letters always displaying in a certain color can do interesting things.
I'm not trying to do anything too crazy, just a little experiment on myself.
So I'm wondering if anybody knows how I may change the color of certain letters on my Mac? I realize that'll make some interfaces look screwy, and in some instances it may not be possible - but is there a way?
Thanks!

Kliegs wrote:
I've never heard of anything like this, so I'm just curious if it exists.
You and me both, let's wait and see what other say. My guess would be that modifications of that type aren't possible w/o some serious "modifications" i.e. hacks, if even via that method, specifically regarding the operating system.

How do i programmatically get the current version of a file?

I asked this same question in the SP2013 forum and I haven't been able to determine the solution. So I posting this here, to maybe get more eyes on this issue.
...I am basically trying to programmatically get the current version of a document in a library, then determine if its a major or minor version, in code. I have tried doing this, to get the current version but I keep getting an empty string returned.
var versions = item.File.Versions;
string currentVersion = string.Empty;
foreach (SPListItemVersion version in item.Versions)
DateTime lastMod = version.Created;
foreach (SPFileVersion fileVersion in versions)
if (fileVersion.IsCurrentVersion == true)
currentVersion = fileVersion.ToString();
Does anyone know what am doing wrong, and how to get this resolved? I really appreciate the help. Thanks

Why not just get the SPListItem and look at it's Version property? That'll be the latest version.
No need to go into the Versions collection etc. When you get a list item you get the current version as standard.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

How do I programmatically access the Color Highlight options in a chart?

Similar Messages

Maybe you are looking for