How do I query a single record from a database?
I need to retrieve a record from a specific table within a .mdb file using it's name or primary key to search.
I have the database connectivity toolkit(LV7.1) and have not been able to figure this out.
Any help would be greatly appreciated.
Jim
Bdougr,
Thanks for the reply, but it's a little over my head.
Maybe I should give some more info. We store test parameters in a MSAccess database.
Using LabView 7.1, I would like to retrieve a "record" or row based on a primary key (our part#)from a .mdb file and then use that data as my test parameters, I do not want to use the row# or record#. The database contains several tables so I also need to get to the specific table.
I have figured out how to get a "feild" or the hole thing but I don't know how to return just one specific row.
I have tried Select data, Fetch, Fetch all and Execute query VIs without success. Would "Execute query" be the way to do it? If so, what would be the correct SQL syntax to retrieve a record base on its primary key?
Jim
Similar Messages
-
How to Enable a Selected single record from Table control...
Hi,
I have 5 records in my table control and in screen Painter in Made all the fields in Table control as Output field.
and successfully all my Table control fields are disabled...
Now Now i want to enable the record which i selected n rest all the 4 records should be in Disable.
what i did is:
in PBO.
loop at itab into wa with contol TBC1 .
Module XYZ.
endloop.
Module XYZ.
loop at screen.
if screen-group = 'x'.
screen-input = 1.
modify screen.
endif.
End Module.
Please help me....
Thanks,hi
in the layout of the screen u might have dragged and dropped the table control
double click on it u will get attributes screen in that u select MULTIPLE or SINGLE under Line-Selection
under attributes tab based on ur requirement.
table control declaration:
controls : control type tableview using screen 8000.
the internal table in table control must be like
data : begin of itab occurs 0,
empno type .......,
empname......,
empcity.....,
check(1), " for tab selection"
end of itab.
data : itab1 like itab occurs 0 with header line.
data : flag.
data : wk_init type i.
data : lines type i.
in the attributes screen of the table control
pass the value ITAB-CHECK to the field W/SELECTION
in SE51
PBO
Module_status_0800
loop with control table_control_name.
module_fill_tcontrol.
endloop.
PAI
Module_user_command_0800
loop with control table_control_name.
module_read_tcontrol.
endloop.
in se38
Module_status_0800.
describe table itab1 lines lines.
control-lines = lines.
endmodule.
Module_fill_tcontrol.
describe table itab1 lines wk_init.
if wk_init is not initial.
read table itab1 into itab index control-current_line.
endif.
for enabling a row in the table control:
if sy-ucomm = 'EDIT'.
loop at screen.
if flag is initial.
screen-input = 0.
elseif ( flag eq 'Y' ).
if ( ( screen-name = 'ITAB-EMPNO' or
screen-name = 'ITAB-EMPNAME' or
screen-name = 'ITAB-EMPCITY' )
and control-line_selector eq itab-check
and control-current_line le lines ).
screen-input = 1.
else.
endif.
endif.
modify screen.
endloop.
endif.
endmodule.
Module_read_tcontrol.
READ TABLE itab1 INDEX control-current_line.
IF sy-subrc EQ 0.
MODIFY itab1 FROM itab INDEX control-current_line.
ELSE.
MOVE-CORRESPONDING itab TO itab1.
APPEND itab1.
CLEAR itab1.
ENDIF.
endmodule.
module_user_command.
case sy-ucomm.
when 'EDIT'. -
> Function Code assigned to the pushbutton to enable the field
flag = 'Y'.
endcase.
endmodule.
Regards
Murali.M -
SQL query to fetch records from 26 onwards
Want to know SQL query to fetch records from 26 onwards.
See the fifth entry on the FAQ page:
Re: How to attach a java bean in forms6i -
I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.
-
How to delete the child record from the database
how to delete a parent and child record from the database can we do it in the servlet and my database is oracle
I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.
-
How can I delete a single song from my iPad?
How can I delete a single song from my iPad?
Hi lizdance40,
The first part of your answer worked great, thanks for that! However, since doing that, there are still songs on the iPad that I want to delete. I place my finger on the song, swipe to the left....and nothing. No red "delete" appears at the right. That used to work on my full size iPad, but not on this mini. I just purchased it last Friday...maybe it's defective?
Thanks again,
Sirsheila -
How can I create a single order from multiple quotations?
How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
Thanks in advance for the answers.hi
Go to transaction: /nva01
Enter order type : ZOR
Sale org :xxxx
Dist.channel:xx
Division :xx
Press enter
Click on Sale document and select Create with reference
Then enter 1st quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation1 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 2nd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation2 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 3rd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation3 copy to order.
Now save the sale document.
Kindly give reward points
Edited by: WISH on Mar 19, 2008 2:25 PM -
How can i get all the records from three tables(not common records)
Hi
I have four base tables at R/3-Side. And i need to extract them from R/3-Side.
And i dont have any standard extractor for these tables .
If i create a 'View' on top of these tables. Then it will give only commom records among the three tables.
But i want all the records from three base tables (not only common).
So how can i get the all records from three tables. please let me know
kumarYou can create separate 3 datasources for three tables and extract data to BW. There you can implement business login to build relation between this data.
-
How to get first 10 records from the database using JSP
i want ot get first 10 records from the database and then after clicking the next button in the page,it must show the next precceding 10 records from the database.i am getting the first 10 records .but how to post to the same page to get another preceeding 10 record.
Search the forums - this has been asked a lot. I usually recommend experimenting with tops and order bys until you're satisfied.
Kind regards,
Levi -
How do you return back one record from a NamingEnumeration
how do you return back one record from a For Loop issue
Posted: Jan 4, 2007 9:13 AM Reply
I have the following piece of code and i want to be able to just return one item...
that is return e.next(); but this line doesnt work for below what is wrong
if (attrs == null) {
System.out.println("No attributes");
} else {
/* Print each attribute */
for (NamingEnumeration ae = attrs.getAll();
ae.hasMore();) {
Attribute attr = (Attribute)ae.next();
System.out.println("attribute: " + attr);
/* print each value */
for (NamingEnumeration e = attr.getAll();
e.hasMore();){
System.out.println("value:- " + e.next()));
return e.next();
}At the end of the loop, the NamingEnumeration has no more elements. You need to call getAll() again.
By the way, please use code tags (above the posting box). You've been here long enough to know that (judging by your registration date). -
How To Access PAGE ITEM (single row) from HTML source
Hi Guys,
I have a page Item that return a string.
I would like to show this string
How To Access PAGE ITEM (single row) from HTML source?
My desire final output is
<marquee>:P1_PAGE_ITEM</marquee>
Can please help me
ThanksHi,
You can refer the page items in your page header as &itemname. For example, if I have page item P15_TEST, I will add the following in header:
<marquee>
&P15_TEST.
</marquee>But make sure that you have a process before header to populate the value in your page item. Otherwise, there will be a null scrolling (which you can't see!) :)
Regards,
Zahid -
How to select first several records from a database table by using select?
Hi,
I want to select first 100 records from a database table by using select clause. How to write it?
Thanks a lot!hai long!
well select statement is used to retrive
records from the database.
following is the syntax to be used.
1) select * into corresponding fields of itab from basetable where condition.
endselect.
ex: select * into corresponding fields of itab from mara
where matnr >= '1' and matnr <= '100'.
append itab.
endselect.
select * is a loop statement.it will execute till matnr is less than or equal to 100.
note: you can also mention the required field names in the select statement otherwise it will select all the field from table mara.
note: itab means your internal table name.
hope you got the required thing.if it really solved u r problem then award me the suitable points.<b></b> -
How to fetch records from the database into a combo box?
Hi:
I´m really new with ABLBPM and I´m trying to fetch records from the database to display them into a combo box as valid values for a presentation but I´m using a dynamic method with this code:
<em>for each row in SELECT campo1, campo2 from TABLE</em>
<em>do</em>
<em>solicitudes[] = [row.campo1, row.campo2]</em>
<em>end</em>
<em>return solicitudes
</em>And the debugger says that SQL instructions can be used only in fuctions and procedures that are executed on the server.
Do you know another way to do it?
P.D. Sorry for my terrible english
GreetingsHi Steve,
Thank you, your idea is perfect, but when I try to run the screenflow where the combo should be filled I get this error:
fuego.lang.ComponentExecutionException: No se ha podido ejecutar correctamente la tarea.
Motivo: 'java.lang.NullPointerException'.
at fuego.web.execution.InteractiveExecution.setExecutionError(InteractiveExecution.java:307)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:166)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.webdebugger.servlet.DebuggerServlet.redirect(DebuggerServlet.java:136)
at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:85)
at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
at fuego.web.execution.servlet.ServletExternalContext.processAction(ServletExternalContext.java:110)
at fuego.webdebugger.servlet.DebuggerExecution.dispatchComponentExecution(DebuggerExecution.java:64)
at fuego.web.execution.InteractiveExecution.invokePrepare(InteractiveExecution.java:351)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:192)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
at fuego.webdebugger.servlet.DebuggerServlet.doDebug(DebuggerServlet.java:148)
at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:82)
at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
Any ideas??
Thanks and greetings -
Fetching 3 laks records from the database
Hi All,
I have a requirement that if we are fetchin 3 lakks records from the database, can we fetch the records in a single span of time ,if yes then how?
If no, then we have to fetch the recods multiple times but since for the first time it is fetching 1 lakh records and for the next time how the bpel engine know that it has to fetch 1000001 record.
Can anybody came this type of scenario. Please guide me on this.
Regards,
ChThere are some options given here @ http://myexperienceswithsoa.blogspot.com/2010/06/db-adapter-polling-tricks.html
Check them out.
But if you reading so much of data at once, you better have the necessary infrastructure to handle the load like memory, jvm tuning, etc ...
If there is a limitation, you will need to assess your polling record count to be may 10K or so to strike a balance on the performance.
Hope this helps.
Thanks,
Patrick -
Select records from one database and insert it into another database
Hi
I need to write a statement to select records from one database which is on machine 1 and insert these records on a table in another database which is on machine 2. Following is what I did:
1. I created the following script on machine 2
sqlplus remedy_intf/test@sptd @load_hrdata.sql
2. I created the following sql statements in file called load_hrdata.sql:
rem This script will perform the following steps
rem 1. Delete previous HR data/table to start w/ clean import tables
rem 2. Create database link to HR database, and
rem 3. Create User Data import table taking info from HR
rem 4. Drop HRP link before exiting
SET COPYCOMMIT 100
delete from remedy.remedy_feed;
commit;
COPY FROM nav/donnelley@hrp -
INSERT INTO remedy.remedy_feed -
(EMPLID, FIRST_NAME, MI, LAST_NAME, BUSINESS_TITLE, WORK_PHONE, -
RRD_INTRNT_EMAIL, LOCATION, RRD_OFFICE_MAIL, RRD_BUS_UNIT_DESCR) -
USING SELECT EMPLID, FIRST_NAME, MI, LAST_NAME, BUSINESS_TITLE, WORK_PHONE, -
RRD_INTRNT_EMAIL, LOCATION, RRD_OFFICE_MAIL, RRD_BUS_UNIT_DESCR -
FROM ps_rrd_intf_medium -
where empl_status IN ('A', 'L', 'P', 'S', 'X')
COMMIT;
EXIT;
However, whenever I run the statement I keep getting the following error:
SP2-0498: missing parenthetical column list or USING keyword
Do you have any suggestions on how I can fix this or what am I doing wrong?
Thanks
AliThis doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/
Maybe you are looking for
-
How can I hook up Microsoft Visual SourceSafe to CS6 for check-in/out?
I've used Dreamweaver for years with Microsoft Visual SourceSafe for Checking files in/out, but now CS6 doesn't support it. Is there a way to get VSS to work with Dreamweaver CS6? I've got a historical database of Visual SourceSafe web file backups f
-
hen I transferring videos from my i pad to a Mac OS the screen on the Mac started blinking on and off is that a problem?
-
How to monitor RFC to JDBC scenario?
How to monitor RFC to JDBC scenario Hello, I have update_insert scenario from RFC to Oracle database. In TOC SXMB_MONI I have black and white flag. In RWB I found for this scenario only successful status. But in the database I found only 2 records fr
-
How to list column names and data types for a given table using SQL
I remember that it is possible to use a select statement to list the column names and data types of databaase tables but forgot how its done. Please help.
-
anybody knws wats the fm to upload a tab delimited file? I tried the fm gui_upload but its not working