How do I remove the "continuous run" requirement?

Hello,
   I recently installed Labview 8.0 and dragged a few
controls onto the front panel of a vi and connected them on the block
diagram in-order to create a quick demo of a potential test setup. When
I ran the "builder" to create a "exe" file the demo file has the
"continuous run" button that needs to be pressed in order for the demo
to run.
  How can I create a exe file that just runs by itself without the
need for the user to place the vi in the continuous run state?
Regards,
Dave
Regards,
Kaspar

Dave,
Does your VI run normally in the development environment? Does it have a loop structure to keep it going? Put all the "test" controls inside a while loop. Add a Stop button connected to the termination node. Add a small delay (100-200 ms is good for user interfaces). You can also set VI Properties to "Run When Opened" which will cause the VI (or .exe) to start when opened.
Lynn

Similar Messages

  • How do I remove the coloured bars from running down the side of my emails.

    How do I remove the coloured bars from running down the side of my emails.

    Hi
    The setting I have in Composing are-
    Composing
    Message Format - Rich Text
    In addressingonly have  tick in When sending to a group
    Responding - tick only the first two boxes
    Last only the bullet for Include selected text
    Hope htis helps

  • How do I remove the hover when I run the click of a second button?

    Good Morning,
    I found half the solution to my problem, that is, the part about the hover state to click on the button:
    1) I converted my Button in ToggleButton
    2) I have added this Style based Triggers:
    <Style TargetType="ToggleButton" x:Key="checkedToggle">
    <Style.Triggers>
    <Trigger Property="IsChecked" Value="True">
    <Setter Property="Background" Value="#5fc3f3"/>
    </Trigger>
    </Style.Triggers>
    </Style>
    To click the button keeps the "hover", the second click will remove.
    Now the other problem: how do I remove the hover when I run the click of a second button?
    Thank You.

    >>Now the other problem: how do I remove the hover when I run the click of a second button?
    You simply set the IsChecked property of the first button to false when the second button is clicked:
    <ToggleButton x:Name="firstButton" IsChecked="True" Style="{StaticResource checkedToggle}">...</ToggleButton>
    <ToggleButton Checked="ToggleButton_Checked" Unchecked="ToggleButton_Unchecked">...</ToggleButton>
    private void ToggleButton_Checked(object sender, RoutedEventArgs e)
    firstButton.IsChecked = false;
    private void ToggleButton_Unchecked(object sender, RoutedEventArgs e)
    firstButton.IsChecked = false;
    Please remember to mark close your threads by marking helpful posts as answer and please start a new thread if you have a new question. Please don't ask several questions in the same thread.

  • How do I remove the spotlight effect on the bottom of my screen? I am running OS 7 on a Macbook. I have already tried the Shift Control Eject.

    How do I remove the spotlight effect on the bottom of my screen? I have already tried the Shift+Control+Eject.

    Could you please post a screen shot - not sure what you mean by spotlight effect.

  • How do I remove the Notification under settings after updating IOS 8.1 ?

    How do I remove the Notification under settings as I have the latest IOS 8.1 on an ipad mini retina display?

    System requirements for Continuity on iPhone, iPad, iPod touch, and Mac - Apple Support

  • How do I remove the LOCK on the Nano I-tunes screen ????

    How do I remove the LOCK that shows on the I-tunes screen when I plug in my IPOD (the IPOD sybol on the source list first turns red and then black when I connect). The list screen goes grey and I cannot delete or upload my IPOD. I have downloaded the new software on both I-tunes and IPOD. There is a physical lock shown at the bottom of the I-tunes screen next to the bar showing used/free space on the IPOD. My shuffle works fine.
    Thanks for your help. I'm leaving on a 2 week cruise tomorrow and want to reload my IPOD.
    Sharon
    Here's the screen dump:
    http://www.pixentral.com/show.php?picture=1fDUSzQZLA1YIqd1Kfs94jlFefddpF1

    What synch method is chosen in iPod Options?
    You may be heading for a software reload on the iPod. It's not difficult, but it does require reloading all the audio files as the process completely erases the iPod. Always grab the current version of the software from http://www.apple.com/ipod/download
    Run that download, which installs an iPod program on your system. Then start that program from Start menu, All Programs, iPod... Connect the iPod, and tell the software to do a Restore operation.

  • How do I remove the Skype Translator preview!?

    Hi.  
    So hard to even find where to submit a question!
    Please help.  I just want to uninstall!  No entries found in add remove programs.  How do I remove the translator preview!?
    I'm now using skype for my new postion and I can't affort to be a part of the translator preview.  It's affecting my system stability.  System is acting wonky and I'm getting many entries in my system log:
    Log Name: Application
    Source: Microsoft-Windows-Immersive-Shell
    Date: 5/22/2015 4:09:33 PM
    Event ID: 5973
    Task Category: (5973)
    Level: Error
    Keywords:
    User: HPENVY\Dwaine
    Computer: HPEnvy
    Description:
    Activation of app Microsoft.SkypeTranslatorPreview_kzf8qxf38zg5c!App failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
    <EventID>5973</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5973</Task>
    <Opcode>0</Opcode>
    <Keywords>0x2000000000000000</Keywords>
    <TimeCreated SystemTime="2015-05-22T23:09:33.219596200Z" />
    <EventRecordID>167617</EventRecordID>
    <Correlation />
    <Execution ProcessID="5600" ThreadID="26552" />
    <Channel>Application</Channel>
    <Computer>HPEnvy</Computer>
    <Security UserID="S-1-5-21-4075998385-1554398878-[removed for privacy]-1001" />
    </System>
    <EventData>
    <Data Name="AppId">Microsoft.SkypeTranslatorPreview_kzf8qxf38zg5c!App</Data>
    <Data Name="ErrorCode">-2144927142</Data>
    </EventData>
    </Event>
    Subject/title text switched with another of the author's sentences in order to reflect post content.

    Hi,
    Are you trying to remove Skype entirely, or just get rid of the tool tray icon?
    IIRC, you get that icon as long as Skype is running in the background.  There's a checkbox in Skype options that will keep it from running on startup.  That will eliminate the icon but you won't get notified for incoming calls.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

  • How can i remove the menu item from a menu

    how can i remove the JMenuItem from a JMenu at run time.
    thanks in advance

    This is in JMenu from the api
    void remove(JMenuItem item)
    Removes the specified menu item from this menu.
    You must download the api! it helps a lot!
    You can do that or if you need to access it again just set it visible(false);

  • How can I remove the page number from the first page of the document that is the cover page?

    How can I remove the page number from the first page of the document that is the cover page?

    If you open the Pages panel, (Window>Pages) you will see thumbnails of your master pages and your document pages. In new documents, there is usually a master called A-Master and one called None. If you drag the thumbnail of the None master onto the thumbnail of a document page, it will apply that master to that page. Presumably, you have made your page numbers on A-Master, so this will usually do the trick. If you have elements on A-Master that you need on the first page, but just not the page number, you can duplicate A-Master (which, by default will give you B-Master, but you can change the names if you like) and remove the page number on the duplicate and apply that to the document page.
    It might also be worth noting that you can apply master pages in the fly-out of the Pages panel. Go to the fly-out triangle and go down to Apply Master to Pages…, then select a master to apply and the range of pages (1-8 will give you all 8, 1, 3, 5, 7 will be the odds, 1-3, 4, 6-8 if you want continuous ranges and individual pages).

  • How can I remove the SCCM 2012 client and reinstall SCCM 2007 client on all of our computers

    Hello All
    We have  bit of a problem. Our virtual SCCM 2012 r2 server was deleted and the back solution we had in place keeps failing.
    We do have our sccm 2007 server still in place but its only role was imaging as we transferred roles from one to another.
    My question is now our support needs to remote into pcs but cant because the CM12 server is gone. How can I remove the 2012 client from all of our companies computers and reinstall the CM07 client so we can remote into computers again.
    Thanks in advance!
    Phil
    Phil Balderos

    Run a ccmsetup /uninstall on the clients. You may need to run via PSExec. Then push out the SCCM 2007 client via the 2k7 console.
    Cheers
    Paul | sccmentor.wordpress.com
    Thanks Paul!
    I have to do this on over 350 computers and 110 servers. How can I do it on a more massive scale?
    Phil Balderos
    I would check Torsten's approach first and see if the ccmsetup will uninstall the 2012 version. I'm not sure. Obviously the other way round is fine.
    Using PSexec you can script this to call up a txt file of all your servers/computers and run the uninstall.
    e.g. 
    for /f "tokens=*" %a in (computers.txt) do psexec \\%a %WINDIR%\ccmsetup\ccmsetup.exe /uninstall 
    If your account has privileges on all devices you won't need to add in any username/password credentials. Obviously only devices that are switched on and you have access to will run this.
    Cheers
    Paul | sccmentor.wordpress.com

  • How can I remove the battery from my Iphone and Ipads?

    How can I remove the battery from my iphone and ipad?

    The iPhone and iPad do not have user serviceable batteries. Battery replacement is handled by Apple. Make an appointment at the Genius Bar if battery replacement is required.

  • Can you get your cracked iPod Touch screen repaired if you colored the top of it with highlighters? If you can't, how do I remove the highlighter?

    I cracked my iPod Touch screen at the top where the front camera is and colored the cracks in with highlighter. I want to know if I can still get it repaired even if its colored in? If I can't, how do I remove the highlighter?

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

  • How do I make the plugin run automatically when a photo is imported?

    I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
    How do I make the plugin run automatically when a photo is imported?
    Thanks for  your help!
    Regards,
    Prosenjit

    psaha84 wrote:
    What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
    As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
    You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
    psaha84 wrote:
    How do I save the custom metadata with the image file?
    Lightroom 5 has the limitation, plugin  cannot link the custom metadata fields to XMP file or save them with image file.
    So, is there any alternative way to save the custom metadata?
    Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
    Good luck,
    Rob

  • How do I remove the location line in a calendar appointment

    How do I remove the location line in a calendar appointment

    Hi Happy,
    To remove the ink tanks and print head from the printer, please follow the steps located here.  Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer.  If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for