How do I render m2v from AE CC?

I'm looking at the list of render formats, and I can't seem to find Mpeg-2. I know it's possible to render m2v out of AE, I just can't seem to figure out HOW ...
Thanks for any help.

Those features are only available in the Adobe Media Encoder in CC. Comp --> Add to AME queue is your friend.
Mylenium

Similar Messages

How can I render an active link (yrl) within a UIX/XML page

How can I render an active link (url) within a UIX/XML page.
How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
Bill G...

It may seem strange, but the <contents> of <rawText> aren't actually
raw - it's only the "text" attribute that's raw. (It seems strange because
it is. Ah well.) This is different from UIX JSP.
So, try something like the following:
<bc4j:attrScope name="Notes">
<contents>
<rawText text="<a href=""/>
<rawText>
<boundAttribute name="text">
<bc4j:attrProperty name="value"/>
</boundAttribute>
</rawText text="">"/>
Some text in the link.
<rawText text="</a>"/>
</contents>
<bc4j:attrScope>
Thankfully, this will be much simpler in 9.0.3, when the following
will work:
<link text="Whatever you want">
<boundAttribute name="destination">
<bc4j:attrValue name="Notes"/>
</boundAttribute>
</link>

How can I pass data from a form guide to another form in a business process

How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.

Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide. This could be either version ES1, ES2/2.5 or ES3/ADEP
If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES.
You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity

How do I render a PDF stored in interMedia object?

I have a pdf stored in an interMedia object and would like to simply render it to the browser. If I drop an <adf:render> tag for it, it creates a hyperlink for it. I'd like it to simply display it.
That is, say I call my page like this:
ShowMeThePDF?Key=<<rowkeystr here>>
How can I get it to simply render it in that page or forward to something to render it, whatever?
CONFUSED.

Hi,
There are a couple of ways to do it, the usual is to use the url from the <adf:render> tag, how like you I've run into the issue where you actually want to redirect straight to the PDF. As yet I haven't found a way to get the rendered URL from the adf:render tag to work.
The solution I've had working for a while is to use a servlet or jsp (servlet recommended) which sends PDF headers and just dumps the bytes to the browser, it's worked wonderfully well, the itext website has examples you can adapt [http://itextdocs.lowagie.com/tutorial/general/webapp/index.html#JSP]
Ideally, I'd like to just use adf's ordDeliverMedia servlet as you're trying to do but I haven't been able to get it working standalone either. I expect the cache id on the rendered urls refers to the memory/session/somethin cache of the file which is created when the tag is encountered on the page. That being the case I'm at a loss on how one can manipulate it from the model pages .. same with the BI Graphs...
It would be really great if oracle put up some more functional examples of ordmedia usage...and let the filename of the downloaded be renamed...

ADG/DataGrid prevent render even from firing immediately on property

Hi,
Is there any way to tell the ADG to not re-render itself immediately after a
propertyChanged even has been fired in the dataProvider?
I have quite a wide row (lots of cells) and lots of custom logic that updates
these dependent properties on each row. i.e. calculated columns. I am doing the
calculations at dataProvider level vs labelFunctions. On each "set" function of
one of my cells in the row I raise a "propertyChanged" event if the value was
changed. Tracing through what the ADG is doing I'm finding that its re-rendering
each time I raise this event even if its in the same row. Is there any way to
tell the ADG to wait a few milliseconds in case another propertyChanged event
comes in so as to render once instead of 10 times?
If there is no ADG option what is the best pattern for this assuming I want to
do this in my underlying dataprovider objects. Should I raise custom events and
fake a itemUpdated once I know there are no more changes? I don't see a clean
way to do this however since I never really know when I'm done, and using a
timer or something of this nature seems like a major hack.
-Tom
Rest of discussion from FlexCoders ...
Re: ADG/DataGrid prevent render even from firing immediately on propertyChange
You might try enableAutoUpdate and disableAutoUpdate on ICollectionView, not
sure if that has the desired affect or not.
You could also put custom events in your model objects and manually dispatch
collection events or call explicitly tell the grid when to update.
By "explicitly tell the grid when to update" do you mean manually calling
itemUpdated at the View level?. If so does the grid actually "know" to re-render
only that updated row? It seems to me that it always re-rendered all visible
cells regardless of what was changed. So passing null or a real row into
itemUpdated has the same results.
Also if I am to manully dispatch propertyChanged from my row, and I never really
know when I'm done updating all of my dependant cells is there any good way to
do this. i.e. Cell A update cell B and cell B update updates cell E, and this
can go on indefinatley. By catchign all property changed events at Row level and
using a timer of say 50ms i would almost guarantee that I wouldn't rethrow more
than a single propertyChanged event on any of the updated cells in a row. Do you
think there is a better way to do this?
Follow up finding,
Do 10 propertyChanged events from my dataProvider cause grid to refresh once or
10 times? My most recent observations show that it's just once, though for some
reason the first load invokes my labelFunction 3 times. Is there any point in
using enableAutoUpdate if grid appears to be 'smart' enough?

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

How to Conditionally Render Command link within af:forEach

Hi,
We have a requirement to conditionally Display/Hide CommandLink item in af:forEach Loop.And this customization is on the Fusion Compensation applications
<af:forEach items="#{bindings.RegionalAreaPVO.rangeSet}" var="parent">
<af:spacer height="10" id="s1"/>
<af:commandLink inlineStyle="font-weight:bold;" text="#{parent.ItemName}" partialSubmit="true" actionListener="#{backingBeanScope.RegionalAreaBean.launchTaskflow}" id="cl1" rendered="#{backingBeanScope.XXWFCRegionalAreaBean.modelEligibleflag eq true}">
<af:setActionListener from="#{parent.Code}" to="#{parentNode}"/>
</af:commandLink>
</af:forEach>
I have added a Cutom Managed Bean Class and Returning boolean value to Control Render property which is working. But now i want to add business Logic based on 'parent.ItemName' or 'parentNode' Values in the bean method to return proper Boolean value.
But i am unable to get the Current Iteration values in the bean method.
I am using below EL expressions to get the values. But no luck.
String nameel = (String)ADFUtil.evaluateEL("#{bindings.parent.ItemName}");
String codeel = (String)ADFUtil.evaluateEL("#{parent.Code}");
String nodeEl = (String)ADFUtil.evaluateEL("#{parentNode}");
Also, i have tried getting the Row object like below but i am getting the First row details always. My intention is to get Current row values and use them for Business logic.
ViewRowImpl row =
(ViewRowImpl)ADFUtil.evaluateEL("#{bindings." + VoName +
"Iterator.currentRow}");
String code = (String)row.getAttribute("Code");
Third option i have tried is to add a dummy Outputtext and have assigned #parent.Code as Value. Idea is to find Component of OutPut text in managed Bean and get the value of it. If Value is say "Model" i want to add more Logic and return true/false accordingly. In this also, i am getting all occurences of Output text in Managed bean and i a unable to identify Current Iterator Index.
Any help is highly appreciated on how can i render Command link Conditionally based on forEach Loop values and Index.
Thanks
Kaja

I have used Condition expression in Render Property to resolve this.

How does weblogic render portal skeleton jsps?

Hi,
how does weblogic render shell?
below is my shell file fragment,
<netuix:head/>
<netuix:body>
<netuix:header>
<netuix:jspContent contentUri="/framework/skeletons/header/pageHeader.jsp"/>
</netuix:header>
<netuix:jspContent contentUri="/framework/skeletons/navigation/topMenu.jsp" />
<netuix:jspContent contentUri="/framework/skeletons/navigation/leftMenu.jsp"/>
<netuix:footer>
<netuix:jspContent contentUri="/framework/skeletons/footer/pageFooter.jsp"/>
</netuix:footer>
</netuix:body>
Do all jsp (pageHeader.jsp, topMenu.jsp, leftMenu.jsp, pageFooter.jsp) rendered parallaly or they rendered as per the flow (as they defined in shell)?
If I set any request attribute in head.jsp or pageHeader.jsp, will it be available in topMenu.jsp or leftMenu.jsp?

Ellen,
I am not clear about your question.
User A will only see the data which is retrieved based on it's principal
name (I assume you use principal name as an argument to retrieve the data
from DB).
If you are using p13n cache make sure the principal name is part of the key.
Please provide more details if you see that I did not understand your
question.
Regards,
Michael Goldverg
"ellen" <[email protected]> wrote in message
news:3d6e46ef$[email protected]..
>
My application has multiple portlets which need to display very sensitiveuser
data.
These portlets read user principles from session (e.g. <weblogic:getproperty>)
and make calls to an EJB to retrieve data from database and display theseuser
specific data.
I didn't specify any synchronize in my code. My concern is when two useraccess
the portlet at the exact same time, will user A see user B's data?
Any suggestions or general guide lines about synchronize in portal will bevery
helpful.
Thanks,
Ellen
These portlet (.jsp file)

How do I keep FCP from auto-distorting my video when I drag it into the timeline?

FCP keeps auto distorting my video when I drag it into the timeline. It keeps setting the motion aspect ratio to -12.5, then when I set it to 0 and render, the video has lost significant quality even though I have my motion render settings to: best. I figure it is this motion distort which is ruining my quality on render because the avi from the camera is ridiculously clean and un-pixelated. How do I keep FCP from auto-distorting my video? It makes no sense that it does, because at -12.5 aspect ratio, FCP is creating a letterbox for my video. I just want the video to fill the entire canvas that I chose! There must be a setting somewhere that I have missed, but I cannot figure it out for the life of me. Please help!
I have a video shot on my Pentax K-r that is 1280x 720p 25fps. When run it in quicktime pro, the inspector affirms this sizing. And in QTpro there is no letterbox present when the original is played.
In FCP I have the sequence settings at:
HDTV 720p (16:9) (which is 1280 720)
Timebase: 25
I have tried to turn anamorphic on, then off in the clip format settings, and also turn the anamorphic on and off in the sequence settings. No combination seems to correct the problem.
Any help is appreciated. Thank you,
ML

Hi I have done some more digging and found this:
1) In the bottom left corner of FCPX, click the film reel so that you can see all your projects:
2) Select the project you are having problems with and then in the inspector window, click on the spanner icon in the lower right side:
3) Finally a window appears so that you can choose the settings for the video you are using:
Hope that helps
G

Remove Render Blocking From Office 365 Public Facing Website

Please does anyone know how to solve this?
Im trying to optimise my office 365 public facing website with search engines such as Google. Google has found a number of errors on all my pages, one being this Remove Render Blocking from Javascript & Optimise CSS Delivery. What does this mean and
how do i fix this? Must be someone out there that knows surely.
The notes Google left where: None of the above-the-fold content on your page could be rendered without waiting for the following
resources to load. Try to defer or asynchronously load blocking resources, or inline the critical portions of those resources directly in the HTML.
Thanks

I feel like I'm losing my mind! Here is a Fortune 500 company web site using Sharepoint public facing: http://www.constellation.com/pages/default.aspx.
Just vaildated it; it contains 93 errors!! Another has a slow-moving Flash component that cannot be controlled by the user and looks like it was built in 1995 at best: http://www.viacom.com/Pages/default.aspx . It contains 59 errors.
What is going on here? The combination of "Cloud" computing and mobile devices is destroying web design! We are regressing!

HT1390 How can I remove rentals from my ipad mini? I have asked I tunes and nothing works. They sent me here

How can I remove rentals from my ipad mini?? I have asked the itunes store and they cannot help. They will not dissappear and I can`t load anymore. And one of them is just a grey box...

I'd defiantly try a factory reset first to see how things look afterwards.
Its safe to say IOS8 is buggy for me and I'm sure Apple will fix many of the issues soon. The main problems I have experienced to date on a factory reset iPad Mini are as follows:
General system slow down.
Safari is very slow to render web pages, this could be WIFI related.
The keyboard seems slow to respond especially within Safari.
I opened a new email earlier this morning and it caused the iPad to auto reboot. Thats a first for me on an Apple device.
The ability to make / receive a call on your iPad always seems to fail for me. My iPad will ring when a call is received I will answer but it will immediately fail to connect. The same happens on outgoing calls.
Battery life on first impressions seems to have suffered since the upgrade.
Role on IOS 8.0.1...

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

In alv report , how to reserve 20 lines from beginning of page

hi experts
in alv report , how to reserve 20 lines from beginning of page.
regards
subhasis.

If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
But I think maximum of 10-12 can be handled by that.
Regards,
Amit
Reward all helpful replies.

How can i move icons from one screen to the other?

How do i move icons from one page to another?

Tap and hold any icon for a couple of seconds. They'll all start to wobble. Tap and drag the one you want to move to the side of the screen and the next screen will appear; drop the icon on whatever screen you want it on.
You can also do it quicker in iTunes - connect the phone and click the Apps tab in the main window. You'll see a picture of your phone with the apps laid out. Just click and drag

How can I move apps from one computer to the other?

How can I move apps from one computer to the other?
(preferably without iCloud)

Backup your iTunes library to an external drive and onto the other computer
http://support.apple.com/kb/ht1751

How do I render m2v from AE CC?

Similar Messages

Maybe you are looking for