How do I represent "LESS THAN"

I am creating a xml file using Oracle XMLDOM package.
I am creating a Text node with value "&lt;". Following is the code that creates text node
CRRuleoptext := xmldom.createTextNode(MDRDocVal,var_mdr_rule_oper_flag);
The var_mdr_rule_oper_flag is coming from a table and its value is "&lt;"
But once the XML file is created I see
<RULEOP>&;#38;lt;</RULEOP>
instead of
<RULEOP>&lt;</RULE>
How do I get < instead of < using Oracle XMLDOM Package?

See: http://technet.oracle.com:89/ubb/Forum11/HTML/004535.html
null

Similar Messages

How do I represent "LESS THAN" using Oracle XMLDOM Package

I am creating a xml file using Oracle XMLDOM package.
I am creating a Text node with value "&lt;". Following is the code that creates text node
CRRuleoptext := xmldom.createTextNode(MDRDocVal,var_mdr_rule_oper_flag);
The var_mdr_rule_oper_flag is coming from a table and its value is "&lt;"
But once the XML file is created I see
<RULEOP>&;#38;lt;</RULEOP>
instead of
<RULEOP>&lt;</RULE>
How do I get &lt; instead of &;#38;lt; using Oracle XMLDOM Package?

Just create a text node with a literal less-than sign "<", this will get serialized either as &;lt; or as &;XX; (where XX is the unicode value for less-than).

How to change too less than 4seconds...

I have more recordings,
they are less than 4 seconds,
When i want to make a cd of it, it doesn't work,
Because these recordings have to be more than 4 seconds in length.
How can i change this?

Many thanks for the useful info from both, Bob Howes & Ryclark
Date: Thu, 4 Nov 2010 09:22:05 -0600
From: [email protected]
To: [email protected]
Subject: How to change too less than 4seconds...
Ryclark is, alas, spot on.
In the bad old days I used to use CD to playback sound effects in the theatre and many of these were less than 4 seconds duration. I used to have to edit in a few seconds silence at the end of all the short effects to keep the CD format happy.
Bob
>

How can I represent more than one plot in an only one chart?

Hello everyone,
i got a code where I don't understand how to represent more than two plots, with different scales each, in the same waveform chart.
As brief review:
* 2 adquisition data wired to Bundle
* wire from Bundle to waveform chart.
* options of th chart: stack plots.
I've tried to expand the Bundle but the problem is that I'm wiring a 3 element cluster to a 2element cluster chart. I don't understand how to upgrade the chart...
(there's the two plots in each chart)
(there's the code, where I've already tried expanding any bundle and wiring other signals, then wiring the bundle's output to the chart)
I think if I could add more scales, it will be possible to plot three plots on the same chart.
Thank you for your time
Marcelo A J

Since you are dealing with waveforms already, I think you actually want to have an array of waveforms to go into your chart. You also need to map the plots to the scale that you want to use. You can do that in the plot tab of the properties window.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to get value less than 0 = 0

I am trying to get a formula to do two operation in one field something like:
form1.#subform[0].yes1.qn1::calculate - (JavaScript, client)
(p1-s1)
then if the value is less than "0" the the value = "0"
what I have so far is not working, any help is greatly appreciated.
if
(this.rawValue < 0) this.rawValue
= 0;
Thank you.

Srini,
Thanks for the reply, although I still cannot get this to work.
I changed the fields to numeric and it still is not working.

How to use not less than or equal to in condition

I written a querry based on the below condition in sql querry
b.key <= a.key
Based on this it will return records.
I need remaining records that not satisfy the above condition.
That means not less than or equal to records...

937506 wrote:
I written a querry based on the below condition in sql querry
b.key <= a.key
Based on this it will return records.
I need remaining records that not satisfy the above condition.
That means not less than or equal to records...you mean
b.key > a.key?

IPhone 6 battery is getting empty in less than a day ! is there anything wrong with it??

IPhone 6 battery is getting empty in less than a day ! is there anything wrong with it??

How much do you use the phone? What type of tasks are you doing on the phone? How much time is less than a day, 23 hours, 16 hours, less?

My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast

My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart the router and the broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
If you're running a MacBook with the lid closed, open the lid. Any difference?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Updated my 3gs to 5.0.1 and my battery life has gone from 1.5 days to less than half a day with no Apps open - how can I roll this back to 5.0 until a fix comes out?

Since updating my 3GS to 5.0.1 my iphone battery has gone, overnight, from 1.5 days + (with multiple open Apps) to less than half a day to completely discharge from 100%.
I desperately need to roll this install back to 5.0 but there are no resources on the internet (or this site) which indicate how I would do that.
Please help.
J

You cannot and should not go back to 5.0.
A fix is coming soon

How to make stills duration less than 00:00:00:01 ?

Hi,
This may seem an odd request, but I have a sequence of several stills of a propeller blade on a model, sort of time lapse, move and photo etc, which when played together rotates the prop. They are currently set to 00:00:00:01 and play loop sees a very slow rotation. I thus need to make them even less than that duration. Is that possible and how is it done ? They currently form the project. R/click duration and altering 01 to 001 doesnt work, the last two numbers being frame number and 25fps is the project value.
Perhaps I need to make the project more than 25fps, so that 00:00:00:01 which means 1 frame I presume, will be seen as far less of a second than 1/25th ? How do I set project to a higher fps if this is the solution ? Then would I save out or export the finished film as a 25fps clip to use elsewhere ?
I also found it silly that I had to right click on each stills clip in timelie and choose duration. I tried selecting all of them and r/click duration but duration was greyed out. If I had a lot there, surely there must be a way of making all their durations the same amount at once ?
I am unable to zoom the timeline to drag their size less.
Envirographics

Hi,
Thanks for the sugestions.
I have not yet transferred a Sequence, I have created a second sequence and dragged it out as a floating window, then dragged a selection box across my stills and dragged them over to it, but no doubt this isnt the way to make them all a combined duration of say 1 frame. They still have separate properties. How is it done such that I can give them as you say one duration for the entire lot.
AE no doubt is After Effects. another purchase. Working on it !
Envirographics.

HT1848 On itunes, when synced to my pc, I show less than half of the music that is on my iphone 4. How do I get all the music onto my pc?

I am about to scream if I don't figure this out or just decide to leave Apple and get a Galaxy phone. On itunes, when synced to my pc, I show less than half of the music that is on my iphone 4. How do I get all the music onto my pc? I have read many forums and tried many things, but apple/iTunes is not intuitive at least not on a PC. When I go to devices it won't let me select "transfer music". It's grayed out. Why is this and what can I do? I'd like to delete some of the music off of my iPhone but don't want it gone forever. Pleae help.

Thanks Turingtest2,
I appreciate your response. I have done all of the things mentioned, but still when I click on "devices", the "transfer music" option is still not selectable. I see it, but can't select it. I am running Windows 7 on my PC.
However, one thing I read makes me take pause. At one point I did erase my computer back to factory settings using the mirrored image. We backed up all information and put the important stuff back on, but I don't believe we did anything with iTunes, so it's a possibility that the music that is in my library now, may only be music I have purchased since then. But, (thinking out loud) that was a while ago and I am pretty sure I have purchased more music than what is in my iTunes library, since then. Maybe I will approach it from that angle and see what happens.
It just doesn't make any logical sense that syncing goes from computer to device. Ostensibly then, my iPhone would only have the music that is on my computer after syncing and that is not the case. I still have all my music on my phone. I can see the new music that's on my phone get added to my iTunes library when I connect, which would make one think that syncing occurs both ways. I don't know. It's maddening. Maybe I should just follow my husbands advice and go to an Android. LOL. Or maybe I will take my laptop and phone to the Apple store and make them figure it out. Ha.
If you have any thoughts about this, let me know. Thanks again.

I need to get 2 decimal places when using a formula for a quotient and Numbers will only give me whole integers which is useless since most items will be less than 1. How can I change this?

How do I get 2 decimal places when using a formula for a quotient? It only gives me whole integers. Most of the results will be less than 1 so I need 2 decimal places

the quotient function returns only whole number portion of the dividing two numbers. If you want the actual decimal value use the divide operator. you enter this as:
A/B
if the numerator is in A1 and the denominator is in B1 you can enter the formula like this:
=A1/B1

How can I get my stereo to play music videos from my Ipod Nano? It comes up with the message "This device not supported". Strangely my Iphone IS recognised. The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

How do I get my Ipod to play music videos through my theatre system? I keep getting the message "This device not supported". My theatre system WILL recognise my Iphone however. The theatre system, Ipod, and Iphone are all less than 4 months old. Any suggestions welcome!

Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

In Adobe Acrobat XI Pro, how do I validate a form field so that it's numerical value is less than or

I have one numerical field named "B," and I need to validate it so that it is less than or equal to the value of another field named "A." I can't figure out how to do that!

OK, so the custom calculate script for field B could be something like:
(function () {
    // Get field values as strings
    var sA = getField("A").valueAsString;
    var sC = getField("C").valueAsString;
    var sD = getField("D").valueAsString;
    // Only perform the calculation if all fields are filled
    if (sA && sC && sD) {
        var sum = +sC + sD;
        event.value = sum;
        // Alert the user if the sum is more than A
        if (sum > +sA) {
            app.alert("Error message goes here");
    } else {
        // Blank this field if all fields are not filled in
        event.value = "";
Instead of (or in addition to) an app.alert popup, you could place this message in a read-only form field, and clear it if there is no error condition.

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

If you want a short list of third party repair options, here you go.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/

How do I represent "LESS THAN"

Similar Messages

Maybe you are looking for