How do I reset a scroll bar in a table?

I have a table that fills up and the scroll bar becomes active in my application. When I start the test over I want to automatically go back to the top of the table as if I scrolled up using the scrollbar. Is there any way to do this? I have been messing with the property nodes and can't seem to find a solution. I am already emptying the table on startup but I cannot get the scroll bar to go back up to the top of the table to see the first few lines of data without doing it manually.

Use the "Index Value" property. It is the (Row, Col) index of the cell to be displayed in the top left corner of the table.
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Similar Messages

How to Enable to vertical scroll bar in a table control

Hi,
I have created a table control with a wizard and later did some modifications on it. Problem I have now is that the vertical scroll bar is disabled on this table control. The end user wants to enter as many rows as possible, however as the scroll bar is disabled, he is not able to add the rows at the end (of the visible table control area).
How do I enable the vertical scroll bar of the table control?
Please help.
Thanks,
Vishal.

Hello Vishal,
In PBO.
Create a Module and in the module increment the value of tbcl-lines.
ex:
Data : L type i.
IN PBO.
MODULE vertical_scroll_bar.
MODULE vertical_scroll_bar.
DESCRIBE TABLE itab lines L.
<table control name>-lines = L + 10.
ENDMODULE.
Hope this solves your issue.
Cheers,
Suvendu

How can we remove the scroll bars from the table?

Hi,
I have a dynamic table. Currently the table appears with the scroll bars. But there is a requirement that the scroll bar should not appear and the table should stretch in the entire page. How can this be achieved.
Thanks in advance
Nita

Thanks Mohammad for the reply.
Was able to remove the scroll bars by using only the styleClass as AFStretchWidth. But there is a default partition in middle of the page still? Can i remove that too by any way.

How to get the Horizontal Scroll Bar for a Table?

Hi All,
As per my requirement, I am displaying several records in a Screen in a Tabular Format. But here I have to show 21 Columns in that table which is too high. I am able to display it but due to it I am getting a Horizontal scroll bar for the whole screen since all the columns are not getting displayed in the normal window screen space. But its looking too odd since once I am scrolling it to right the columns are getting displayed but the above Header Bar and Global buttons are not displaying, they are bound to the normal screen space.
Is there a way to have a Horizontal scroll bar only for that table instead of the entire screen so that on scrolling that bar only the table rows will beshifted ant got displayed?
With Thanks
Kumar Gautam

try this approach.
include a raw text item before and table item.
include the appropriate HTML tags in raw text item to enable horizontal scroll
--Prasanna

How can I hide the scroll bar in TextArea?

How can I hide the scroll bar in TextArea?

Hi. To remove the horizontal scrollbar you can do this:
textArea.setWrapText(true);
To remove the vertical scrollbar you can do this:
ScrollBar scrollBarv = (ScrollBar)ta.lookup(".scroll-bar:vertical");
scrollBarv.setDisable(true); and set the opacity to 0 in the css file:
//css file
.text-area .scroll-bar:vertical:disabled {
    -fx-opacity: 0;
}Here is an example:
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ContextMenu;
import javafx.scene.control.MenuItem;
import javafx.scene.control.ScrollBar;
import javafx.scene.control.TextArea;
import javafx.scene.input.ContextMenuEvent;
import javafx.scene.layout.StackPane;
import javafx.stage.Stage;
public class TextAreaSample extends Application {
    @Override
    public void start(Stage primaryStage) {
    final TextArea textArea = new TextArea();
        textArea.setWrapText(true);
        StackPane root = new StackPane();
        root.getChildren().add(textArea);
        Scene scene = new Scene(root, 300, 250);
        primaryStage.setScene(scene);
        primaryStage.show();
        scene.getStylesheets().add(getClass().getResource("style.css").toExternalForm());
        ScrollBar scrollBarv = (ScrollBar)textArea.lookup(".scroll-bar:vertical");
        scrollBarv.setDisable(true);
    public static void main(String[] args) {
        launch(args);
}

How do i put a scroll bar on a JEditorPane ?

How do i put a scroll bar on a JEditorPane ?
Can somebody point me to some sample
code that works?
thanks in advance
Owen

You should use a JScrollPane and add the JEditorPane to it...

Pls help - how to create a navigator scroll bar in full flash site

hi to all,
good day! i'm norman of RP this s for all d flash master, i'm
beginner only in flash and i want to create a full flash website
but i didn't know on how to put a navigational scroll bar. is der
anybody can help me to give me a simple code of it or a link?
i appreciate any help from all of u. I nid it badly to my
project.
many tnx an advns
- normz - RP -

hi,
use this below div tag to the table:
<div style="overflow: auto; width: 480px; height: 100px; border-left: 1px gray solid; border-bottom: 1px gray solid; padding:0px; margin: 0px;">
<table>
</tabe>
</div

How to add scroll bar in webi table

Hi Experts,
Currently i am working on webi report it consist lot of tables and charts. As per my requirement the webi table should contain scroll bar instead of showing all data in single shot. And user will scroll down if he/she required. Is it possible in webi?
Regards,
PRK.

Hi Praveen,
Adding scroll ball in Webi table is not possible currently.
Requests has been raised by some people in SAP Idea place, see the link below for more details.
You can vote in SAP Idea place for getting this feature
Add scroll bars for Webi tables : View Idea

Want a scroll bar for a table view

Hi Experts,
I am developing in NWDS 2004S.
I have 2 groups in RootUIElement,
in one group i have few labels & input box with a button,
in other group I have a table.
On click of button according to values in inputbox an RFC is called & Table is populated.
Now my requirement is like, my table has around 33 columns
But i don't want the scroll buttons in footer of table view
I want normal scroll bar for that table.
Kindly help me.
Will award points !!!
Thanks

hi
          thanks for the reply ,
        using scroll container is working fine ,
           but this functionality should be achieved for the
           table , not table to be put int he scroll container
           as the problem is , i have 2000 entries in the
             table and for this again i need to drill down using
                 arrow or drill for certain entries using arrows
            instead need scroll bar for the table
                 if this can achieved it would be helpful ?

Vertical scroll bar for the table

Hi,
I have a table which will contain more than 100 rows. First Visible rows will be 10.
i want a vertical scroll bar for the table, so that i can see all the rows using vertical scroll bar. While scrolling down, the header row, which contain names of the column should be static (ie visible even scroll down) and the footer of the table should be visible even goes up.
If I use Scroll container, it will take whole table and the header row, row with name of column will move up invisible when i scroll down. So it is not useful if i use scroll contatiner.
I need a fnctionality were table has a vertical scroll bar to it.
Thanks
Maha

Hi,
Your requirement is one of the default properties of the Table UI element in NWDS CE version.
Regards,
Alka.

How do I get the scroll bars in iCloud Numbers Beta to appear?

I have been playing around with Numbers iCloud and have a long spreadsheet. The only way I have figured out to make scroll bars appear is to drag on one of the spreadsheet's borders. They appear, then disappear as soon as I get done scrolling. How can I make them stay visible or make them visible in a more elegant way?

I don't know if you're still working on this, but I finally stumbled onto a solution. I've been having the same problem using iCould Numbers on a PC in Google Chrome. I finally figured out if you 'mouse over' where they're supposed to be, they'll appear. So drag your mouse over near either the edge of that window or where the spreadsheet meets the format panel along the right edge (depends on what you have showing.) The scroll bars will faithfully appear.

How do i add a Scroll Bar to a JList Component using absolute positioning?

I've got a applet whose content pane is set to null. I've create a jlist component on this applet and using absolute positioning set the bounds at
ListBox1.setBounds(380,10, 500, 500);.
My problem is creating add a scroll bar to the list box.
JScrollPane scrollPane = new JScrollPane(ListBox1);
C.add(scrollPane);
The above code is what i use and when i run this applet i don't see the list box at all. How do i add a scrollbar to this list box or JList component. Please help.

You need to setBounds() on the JScrollPane, not the JList.
The JScrollPane is the component that is being added to the panel.

How can I retrieve the scroll bar in Home applications using OS 10.6.8? I don't have a general section after clicking on System Preferences. Thanks.

I have deleted the scroll bar twice in 4 years and I still don't know how to set it back. Please help.

hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop - I thought I would just move it all now, new - and then keep saving/dragging physically across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ? = under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie

How do I keep the scroll bar from disappearing in the Mountain Lion update 10.8.5?

When I got the prompt yesterday that there was an update for Mountain Lion I went ahead and downloaded it, and it is awful! The scroll bar on the right side of the screen disappears too quickly now to use it easily, and is difficlut to get back, which adds extra steps (clicking on the down arrow while the cursor is in the scroll area then quickly clicking the arrow cursor while it is in the temporary scroll down bar. Or else this is from a Firefox update I did NOT actually download, but indications when I started up my computer today are that it did download somehow by itself without my permission, as there was a notice that some of my Mozilla ad-ons might not be compatible with this version of Firefox. I couldn't understand that since it should have been the same version of Firefox I used yesterday! I know I didn't download the new Firefox because the pop-up box went away very quickly each time it came up so I never did click on it. Does anyone know if the change in scrolling is a Firefox update or the OSX 10.8.5 update? I HATE it and want it off, but don't know which one is the culprit nor how Firefox updated itself without my consent. Aaaarrrggghhh!

System Preferences > General > Show scroll bars:
Make sure that "Always" is selected.
Best.

How to fix double vertical scroll bar in responsive output

After implementing the solution provided for the question 'Responsive HTML5 Output: How to auto adjust the screen resolution for all devices?', the function bar in output does not appear and also another vertical scroll bar in the output. I edited the max-width value in the layoutfix.min.css file and fixed the function bar issue. How can I do away with the additional vertical scroll bar?

I've looked into the issue.
@Delennish: In your case, the size of the iframe is too large, or you have an extra empty element below the iframe. You can try 2 things:
1. Best solution but may have side effects: In the main.css, add the following code:
div.contentholder { overflow: hidden !important;}
For this option, please check for undesired side effects.
2. Works, but is ugly: In the main.css, add the following code:
div.floatholder iframe.wTopic { height: 95% !important;}
Try playing with the height setting until the 2nd scrollbar disappears.
@CarolW: The layout you're using is very old. I've made a new responsive layout with TOC only. Please use that one instead: http://www.wvanweelden.eu/sites/default/files/attachments/Theme1_Standard_TOC_Only.zip (I'll update my site with this new version later.)

How do I reset a scroll bar in a table?

Similar Messages

Maybe you are looking for