How do I reset the FP-2000 to the correct time and date through labview??

I have blundered through most of my other issues, this is one of the holdouts. Can someone please help me out?

I ran into this problem some time back. I asked the NI Engineers for a solution and they sent me the attached zip file. Although, after some discussions we realized that the FP module is set on GMT time. Therefore, I had to create a vi that would correct for local time (GMT to Local Time). I use this vi locally on my FP-2010 network module. It converts the time on 2010 (GMT) to Local time for time stamping my data. Good luck...
Attachments:
SETTIME.ZIP ‏156 KB
GMTLocalTime.vi ‏53 KB

Similar Messages

How do you add the absolute time and date to a spreadsheet file?

I am creating a spreadsheet file, and I want to write the absolute time and date to its first column. Does anybody know how to do this?
Thank You,

BrianL answer is still valid !
Attached is an example file with an express vi configured to use the absolute time generated from a get time/date node.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Save with absolute time.vi ‏135 KB

My mac app store cannot get a secure connection although my internet is fine and i have the correct time and date. I cannot get onto the app store to update. It just keeps saying cannot make a secure connection do i want to continue anyway

see above

This procedure is complicated, but you probably won't have to do all of it.
Take each of the following steps that you haven't already tried until the issue is resolved. Back up all data before making any changes.
Step 1
Check the status of the service. If it's down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Check that the date (including the year) and time shown by your system clock are correct.
Step 3
Restart your router and your broadband device, if they're separate.
Step 4
If you connect to the Internet through an HTTPS or SOCKS proxy server, follow the instructions in this support article, or deselect the proxy entirely.
Step 5
Boot in safe mode and test.
Step 6
Make sure Parental Controls aren't active for your account.
Step 7
Follow the instructions in this support article to change your DNS settings. If there's no change, revert the settings.
Step 8
If possible, test on a different network, such as a public Wi-Fi hotspot or the cellular network of your phone.
Step 9
Launch the Keychain Access application. In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings. Never again change any of those settings.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Next, select the login keychain. Delete any expired or otherwise invalid certificates.
Log out, log back in, and test.
Step 10
Launch the Activity Monitor application. Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
If not, back up all data, then triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Move all the files in the folder that opens to the Trash. You’ll be prompted for your administrator password. Reboot, empty the Trash, and test.
Step 11
If you've moved to a different country, select
Store ▹ View My Account
from the App Store menu bar, then click
Change Country or Region
and update your billing information.

How to get the start time and date

Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

UC320: how to set (correct) time and date, upload own AA messages, get caller ID, telnet?

Hello there,
Just trying out the UC320 I got borrowed from Cisco AT for testing with firmware 2.1.2 (1) localized for Austria.
The device is connected to the cable modem of my ISP (Kabelsignal) utilizing two FXO ports, getting an IP address from my DHCP being connected to a WS-C2960G-24TD (LAN 1@UC320 connected to Gi0/18@C2960G port macro Cisco Switch enabled).
Now I would like to try/see the following features:
- a correct time and date: huh? hwo/where???
No option to set this right??? No NTP option??? Am I just blind or too stupid to find that option/s?
- upload own messages for the AA: ok, there are german messages but someone might have a little bit personalized ones - maybe telling callers the company name before asking them to dial the extension if they know it. Making custom messages is not the problem - but how to upload and in which sound/data format?
- caller ID: my ISP told me that he transfers the caller ID correctly to analoge end devices if caller ID is available and not suppressed. All I can see when a call comes in is which FXO Port is being used by that call. So callback entries on the SPA phone is senseless. Any advise?
- CLI: You can telnet the device - but which credentials to use to successfully logon? The pre-assigned credentials form Cisco AT are not accepted for logon.
BTW @Cisco guys: I am also voting for support for the older SPAs (e.g. 942)

Hi Claus,
Thanks for giving the UC320W a spin and glad you found the support community! Let met see if I can help answer your questions....
Time/Date & NTP -- The UC320W is preconfigured with Cisco's Small Business NTP server. The preferred method for correct time you will need the UC320W WAN to be connected with Internet access. If there is no WAN connectivity there is a feature in the 2.1.x firmware where you can set the time on a SPA phone GUI and it will then update the system time. Alternatively, if you have a LAN side NTP server that is on the same subnet as your Data VLAN subnet, you can use the NTP.pmf file found here: https://supportforums.cisco.com/docs/DOC-16301
Upload custom Music on Hold and Auto Attendant prompt files. We are currently in beta of a new Cloud service. To participate in the Beta, please send an e-mail to [email protected] requesting MoH/AA Custom files Cloud Beta participation.
Caller ID on FXO: Make sure that you have run the impedance matching tool on each of your FXO ports. For additional information on running the Impedance Matching tool and Caller ID troubleshooting, please see the UC320W Troubleshooting Guide.
CLI access -- This is for Cisco Support personnel only for low level debugging. This is not a IOS based device and there is no command line access for provisioning.
Cheers,
Chris

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

Where can I find the current time and date of Time Capsule?

I have a home network consisint of 2 x Time Capsules and 1 x Airport Express. All is working fine. I would like to set up access control for one machine connecting to the network and I can see I can do this under Access Control on the Airport Utility. My question is where can I find the current time and date setting for these devices?
I can set them to use the time.apple.com server to set the time automatically, but I can't find where to see the current time and date of the device. The only place I can see reference to the time and date is on the logs and statistics under the Advanced tab of the AirPort Untility.

I don't think you can change the time and date on the TC itself, it just connects to a time server (and you set your own time zone).

HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

Has anyone had the Network time and date error with Apple TV when traveling?

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

How do I set the correct time?

My outgoing email messages have the correct DATE but the TIME is incorrect. How do I set Thunderbird to provide the correct time on my messages? Thanks.

Thunderbird uses your computer clock. Make sure the time and the time zone are set correctly there.

How do I reset the network name and password?

I just bought an Apple Airport Extreme base station. When I was going to set up the network, I found that it has a name, apple, for the network. I do not have the password to go in further. How do I have to do to rest the whole thing?
Thank you for your help.
Robert

Hold the reset button on the back of the unit for 5-10 seconds. It will reset the name to Apple<lastdigitsofyourextremeid> and will remove the password. You can then use AirPort Utility to configure the password to what you want it to be, if any.

How do I reset the "administrator" name and password - the one that I use when I first log on? Thanks

When I first turn on the computer (MacBook Pro) I am required to type in a password. How do I change that username and password? Thanks

ds store wrote:
Reboot with the installer disk that comes with the computer, you need to hold c while booting, under the second or third screen is a menu option to reset the password.
This is necessary if you don't remember the password. However if you know it and just wnat to change it, go to system preferences, accounts and then unlock it by typing in the admin name and password (the current one). Now click on the admin account on the side and you can change the name by typing one in the full name: box and the password by clicking the change password button.

HT4990 How can i reset the security question and answer?

I did not remember the security question and answer. Then, if they ask me for verification problem. How can I solve this problem?

Click here and search the article for '2 out of 3'. Follow the instructions.
(73898)

How do I reset the local time?

IOS 7 has set the time on my IPad to California time and I'm in Michigan, How do I change the time?

Settings>General>Date and Time>Time Zone

When viewing a photo in full screen, how do I get the file information and data along the footer. How do i get that to go off? Preferences.....???

Love full screen view, but my file information and data are showing along the footer. How do I change me settings so this doesn't show?
Thanks!!!!

Anne, didn't the answers Frank and I gave in the other tread work? See:
Re: How do I turn of the focus points in Aperture when viewing a photo in a non-thumbnail view? Thanks!
Or did you want to know something differently?

How can I set the Lock Model and data structure ?

Hi ,
I just have two questions about JE:
1) Is there some method for me to set the lock mode level , such as record lock, page lock and database lock in JE?
2) I learned that there are Btree and Hash,etc , data structures , How can I set the data structure when using JE ?
Thanks in advance !
Chris

I think you're confusing our DB (C-based product) with JE. JE does not have lock mode levels, page locks (it does not have pages), or database locks. JE only has the BTREE method, it does not have the HASH method. For JE, please be sure to reference the JE doc page:
http://www.oracle.com/technology/documentation/berkeley-db/je/index.html
--mark

How do I reset the FP-2000 to the correct time and date through labview??

Similar Messages

Maybe you are looking for