How do I resize a graph?

Hello,
how do I resize a graph? From what I can see, I can only set its size when I create it?
I guess I could Transform > Scale an existing graph - but I'd rather set a fixed width and height so I can keep the proportions right for when I import the graph into InDesign.
Thanks!

The final size of your graph depends amongst other things on the size of the type and the number of digits in the XY values. So rescaling with either the Scale ot Transform tools is almost always necessary. I suggest snapping ruler guides to a rectangle which is in the correct size may be a good idea. Then you can always snap your graph to fit to the guides. Be aware that simple scaling will result in the type becoming distorted. You can select the type by double (or treble)-clicking on one of the digits with the Direct Selection (white arrow) tool. That way you select the whole group to adjust the size of the type.

Similar Messages

  • [graph] deleted plots are drawn till resize of graph

    I work on CVI2012SP1 and I´m having some trouble with the graph control.
    As the stripchart control does make to much trouble for me I went with the graph control to display a moving chart. This works much more painless than with the stripchart, but now I got another problem with drawing the plots.
    I´m deleting all plots and then adding new ones. Then I call RefreshGraph() and the new plot is drawn, but also is the old plot (see the screenshot)!? If I resize the graph only the current plot is drawn.
    Why is this so? Is this a bug? How can I work around it?
    Solved!
    Go to Solution.
    Attachments:
    Fehler Graph Zeichnen.jpg ‏467 KB

    I don´t know if I understood you right.
    This is a stripped down example of the code I use:
    // Graph nicht zeichnen
    SetCtrlAttribute(panel->panelHandle,g_scGraphContr​olIds[CTRL_GRAPH_CHART],ATTR_REFRESH_GRAPH,0);
    // alte Plots entfernen
    DeleteGraphPlot(panel->panelHandle,g_scGraphContro​lIds[CTRL_GRAPH_CHART],-1,VAL_IMMEDIATE_DRAW);
    // aktive Y- Achse setzen
    SetCtrlAttribute(panel->panelHandle,g_scGraphContr​olIds[CTRL_GRAPH_CHART],ATTR_ACTIVE_YAXIS,VAL_RIGH​T_YAXIS);
    // Plots eintragen
    for(int sensor = 0; sensor < 8; sensor++)
    int colorTrace;
    int colorMinMax;
    // Farben festlegen
    if(panel->showTrace[sensor])
    colorTrace = g_GraphTraceColors[sensor];
    if(panel->showMinMax[sensor])
    colorMinMax = g_GraphTraceColors[sensor];
    else
    colorMinMax = VAL_TRANSPARENT;
    else
    colorTrace = VAL_TRANSPARENT;
    colorMinMax = VAL_TRANSPARENT;
    // Value Plot zeichnen
    panel->plotHandle[sensor * 3] = PlotXY(panel->panelHandle,g_scGraphControlIds[CTRL​_GRAPH_CHART],g_sGraphXBuffer,valueBuffer[sensor],​numPointsChart,VAL_INTEGER,VAL_DOUBLE,g_GraphLineT​hickness,VAL_NO_POINT,VAL_SOLID,1,colorTrace);
    // Min Plot zeichnen
    panel->plotHandle[sensor * 3 + 1] = PlotXY(panel->panelHandle,g_scGraphControlIds[CTRL​_GRAPH_CHART],g_sGraphXBuffer,minBuffer[sensor],nu​mPointsChart,VAL_INTEGER,VAL_DOUBLE,g_GraphLineThi​ckness,VAL_NO_POINT,VAL_SOLID,1,colorMinMax);
    // Max Plot zeichnen
    panel->plotHandle[sensor * 3 + 2] = PlotXY(panel->panelHandle,g_scGraphControlIds[CTRL​_GRAPH_CHART],g_sGraphXBuffer,maxBuffer[sensor],nu​mPointsChart,VAL_INTEGER,VAL_DOUBLE,g_GraphLineThi​ckness,VAL_NO_POINT,VAL_SOLID,1,colorMinMax);
    // Graph zeichnen
    SetCtrlAttribute(panel->panelHandle,g_scGraphContr​olIds[CTRL_GRAPH_CHART],ATTR_REFRESH_GRAPH,1);
    RefreshGraph(panel->panelHandle,g_scGraphControlId​s[CTRL_GRAPH_CHART]);
     As said, if I replace the "VAL_IMMEDIATE_DRAW" with "VAL_DELAYED_DRAW" the old plots are drawn until I resize teh graph.
    As I see it, I´m not reusing the plot handles, but getting new ones for every change (of the data) I make.

  • How do you resize multiple artboards in Illustrator at the same time?

    Hi,
    This is a question that has been bugging me for a while.  I'm currently on CS6 but I'm looking for a solution that can also work on CS5 for a co-worker.
    Having multiple artboards has been established since CS4 and I have yet to see an official way of resizing multiple artboards, if anything there should at least be a plug-in.
    As great of a feature it is, it seems a little short sited.  If one has multiple artboards one should be able to manage multiple artboards, right?
    I totally love having multiple artboards but I should be able to resize and manage multiple artboards as well.
    This is great for building icon sets but how can I resize the set all at once?
    I was considering trying to do an action but odds are I still would have to select an artboard one by one to do which doesn't save much time if you have like 30 artboards to apply this to. 
    I don't even see a batch render for artboards and Photoshop has that for its files.
    I'm well aware of the solution that is displayed here:
    http://forums.adobe.com/thread/1093465
    Which is a script.  I'm not sure where I'm supposed to put it.

    mec_os wrote:
    you can resize the artwork on export. no need to draw it to size.
    Unfotunately when I looked into that does not seem to be the case.  However I can resize when I "Save for Web" but that appears to only work for one artboard at a time.  I can Save As or Export multipe artboards but not adjust the size.  Believe me I would be happy if I could resize multiple artboards upon export but apparently that is not an option.
    mec_os wrote:
    you can put the scripts in illustrator's folder/presets/en_us(or whatever localization you have)/scripts. you can then access them in illustrator from the menubar/File/Scripts/
    there are also applications that will let you execute scripts with assigned shortcuts. i believe sparks is free.
    Thanks for pointing out the location. 
    Do I save it as a txt file or something else?
    (I was guessing that I would copy the script into notepad or something)

  • I am using a doc formatted on excel --- how do i resize the doc to fit on one page?

    I am using a document that was formatted in excel (on a PC) --- how do i resize the document to print on one page?

    Hi phylw,
    Here is one way. View > Show Print View. At the bottom of the window is a slider control called Content Scale. Slide to the left to shrink the document.
    Under File > Print... you will see a print preview that tells you how many pages the document now occupies.
    Regards,
    Ian.

  • How can I resize a photo in iPhoto without cropping it?

    I am taking pictures on my iphone 4s and using iphoto to edit them on macbook pro.  I need to upload these photos at a size much smaller than what i am able to take with my phone.  The only way I see to adjust the size of a photo in iphoto is to crop it.  How can I resize without cropping?
    Thank you

    It's an option in the Export menu.
    File -> Export and under the Size option you can choose the maximum you prefer. Export that and upload from the desktop.

  • How to dynamically resize JPanel at runtime??

    Hello Sir:
    I met a problem, I need to resize a small JPanel called panel within a main Control JPanel (with null Layout) if I click the mouse then I can Drag and Resize this small JPanel Border to the size I need at runtime, I know I can use panel.setSize() or panel.setPreferredSize() methods at design time,
    But I have no idea how to do it even I search this famous fourm,
    How to dynamically resize JPanel at runtime??
    Can any guru throw some light or good example??
    Thanks

    Why are you using a null layout? Wouldn't having a layout manager help you in this situation?

  • HT202879 How do I insert a graph on a pages doc?

    How do I insert a graph on a Pages Document?

    Insert menu -> Chart
    If this is a graphic created by some other software:  Insert menu -> Choose
    Regards.

  • How can I resize partition? - New larger hard drive installed

    Hello,
    The hard drive on my MacBook Pro recently died on me (just past my Apple Care warranty - lucky me).  I sent it to an authorised reseller/repair place and they installed a new hard drive for me - replacing my old 250GB with a nice new 500GB.  The problem is when they copied over the disk image from my previous hard drive they did not scale up the image (yeah, not so happy bout that).  Now I find myself with a 500GB hard drive with a 250GB partition called Macintosh HD and 250GB of unused/unusable space.  On top of that I'm just starting to get messages saying boot disk nearly full.  How can I resize the "Macintosh HD" partition to use the entire disk?  I've tried using disk utility, clicking on the main drive, going to the partition tab and dragging the Macintosh HD partition to use the entire disk but after a few seconds of a message saying "waiting for disk to reappear" it returns to the same 250GB size.  Running OSX 10.9.3.  Any suggestions?
    Thanks all!

    See the tips in pounding's section on using Disk Utility:http://pondini.org/OSX/Home.html and you could also take the route of buying an external hard drive (a great idea of maintaining a backup), format that drive for Mac OS X Extended (Journaled), clone the startup disk to that drive, then boot from the external, erase and format the internal, then clone the external back to the internal partitioned as you want.

  • How can I resize a pdf page content with annotations and highlights in Acrobat Pro?

    How can I resize a pdf page content with annotations and highlights in Acrobat Pro while maintaining page size and annotation/highlight interactivity? I've tried to use the crop tool in Acrobat Pro (9) and the page does resize, but the highlights and annotations go all over the place. I specifically need to scale the page content smaller (83%) but maintain page size and annotation/highlight to content connection and interactivity.

    An old trick (not recommended) would be to print to a new PDF with the page size selected but a scaling of the content. Only print the document, not the markup, to a new PDF. Close that PDF when done and reopen the old one (or maybe a copy of the old one for safety) and use Document Replace pages and select the new document to replace your current pages. You will then have to go back through the markup to locate it all correctly. There may be a more elegant way, but this may be the fastest.

  • ALV Graphs: How to set line type graph as default graph

    Hi All,
    I need to develop a line graph. The fields on the X-axis will change dynamically. Some times they may be 10 field and some times they may be more than 100 fields. I tried with Function Module GFW_PRES_SHOW_MULT. But I can only display maximum 32 fields. Can anyone tell me exact program which helps me to full fill my requirement. It will be a great help if you could told how do display line type graph as default graph in ALV.  In REUSE_ALV_GRID_DISPLAY there is a Exporting parameter MT_CHART_TYPES but this help you only to enter description for X-axis and Y-axis.
    Many thanks in advance.

    I would call GRAPH_MATRIX_2D with options depending on representation you wish
    look at the program GRBUSG_1 to see how to use it
    there you have some options to display bar chart, but you could use other values (complete list of options is available in documentation of function module GRAPH_MATRIX_2D - click on parameter OPTS in help display to see full explanation)
    exemple:
    P2TYPE = LN to display lines

  • When I open a file in Photoshop CS4, how can I resize My Open Window File?it is stuck on full screen

    When I Open a File in Photoshop CS4, How can I Resize My Open Window File? It is stuck on Full Screen?

    Which operating system are you using?
    On a windows os, usually one can just double click on the title bar in the open dialog.

  • I have Adobe Photoshop 9.  I am a novice.  How can I resize photos in my files using batch resize?

    I have Adobe Photoshop 9.  I am a novice.  How can I resize photos in my files using batch resize?

    In the Editor, use File...Process Multiple Files.  See the Help for more info.
    Ken

  • How does I resize a pdf file page using Acrobat Pro?

    In Acrobat Pro, how can one resize a pdf file page (21.38'' x 26.75'') into one measuring 6'' x 9'', to be submitted as the trim size? Is there a feature that allows this to be done? How does one set all print options from the Application print dialog box to enable one to adjust the dimensions of any customized file page?

    I want to scale the 21.4'' by 26.8'' content down to one that can be fitted inside a 6'' by 9'' book.
    I have this pdf that was created from the InkFlow app, and I'm using Acrobat Pro to merge three files into one (about 300MB), which I needed to submit to Amazon's CreateSpace, but they needed the trim size of 6'' by 9'', while the pdf is 21.4''' by 26.8'', and I can't amend the source file size of the InkFlow files.
    I tried fiddling with the Crop and Print options, but I'm unable to resize the pdf to match the trim size. The problem on my side isn't so much on printing but to resize the pdf file page to 6'' by 9'' to satisfy Amazon's requirement for their trim size. Could this be done with Acrobat Pro? The message that appears is: Full print options of Acrobat Pro, set all print options from the Application print dialog box. Thank for the help.

  • How can I resize and reposition the Date Created window for All windows?

    When setting view options for a finder window set to list view, I cannot get column resizing or positioning to hold. When making those changes, the option for "All Windows" automatically shifts to "This window only" and it then does not hold.
    How can I resize and reposition the Date Created column for All WIndows?

    Hi Harmz,
    Try dragging this file to the Îesktop & reboot...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist

  • How to create a pie graph in 10g or 9i forms using beans??

    Hi..
    Please can anyone show me how to use pie graphs in oracle 10g or 9i forms using bean?
    i also want to know how to put data in pie graph.. as u know in column graph for example we have an x-axis and y-axis,and in pie there is no x-axis and y-axis.. so how i can put the same data in pie graph.. and also i may need more than one value for the x-axis or the y-axis to use in pie graph so how can i do it??
    i use set_custom_property to call properties in beans.
    I would so thankful for how can answer me.. please its urgent
    Thanks.

    there are some other posts to this topic - How to create a pie graph in 10g or 9i forms using beans?? and so on.
    use the search function of this forum. this may the fastest way for your urgent question

Maybe you are looking for

  • Reference partition with Trigger

    This post is an extended version if my previous post -Dynamic Reference partition by Trigger on Feb 24 I need to create a Dynamic Reference partition with Trigger. Requirement:- 1. It should be a list partition 2. It should be a referencing Partition

  • Trying to load dvd from hp to ipod

    i am trying to load a dvd that is in my hp pavillion onto ipod and cant figure out how to do it?

  • Upgrade ipad 2 to iOS 7.1.2

    Hi, I have iPad 2 with iOS 6.1.3 on board. How I can upgrade on iOS 7.1.2 only? Thks

  • Org Specific Purchasing Category Structure and Values

    Hi I have an instance with 2 separate organisations defined under 1 business group. Each organisation requires its own purchasing category structure and values. I cant seem to be able to achieve setting each org with its own values using a different

  • HHActiveX.dll is being overwritten by a different, earlier version...

    Here's an interesting problem: On some systems on which my .chm file for a local help system is installed, HHActiveX.dll (the 32-bit one supplied with RH9 for redistribution) is being overwritten using a different, earlier version. It is not yet clea