How do I resize every image in a frame to a certain size?

I have about 20 frames in a single layer (and a single, long frame in another layer -- this functions as the background layer). Each frame contains a different image. But each image is set to the document size of 700 px by 400 px. I would like to change all of the image sizes to 1920 px by 1080 px.
Is there a quicker way to do that besides having to click on the images in each frame, going to the properties panel, and manually changing the width and the height from there? Thanks to anyone who would be of help.

There is a scripting language (JSFL) that can control Flash IDE interface to automate common tasks, but this isn't one. If it's just 20 images it's not nearly worth the time or complexity to use JSFL for it. You're better off just doing it by hand.
Please note that if you're not increasing the size of vectors, a huge upscale (700x400 -> 1920x1080) is going to result in quite a bit of blur. If you have the original source to these images and it's any larger than 700x400 I would urge you to go back and re-export these images with an application like Photoshop rather than stretching them in Flash. You'll gain the performance from importing and presenting the bitmaps at 100% size rather than performing a stretch (unless you enable cacheAsBitmap) and you'll have the chance in Photoshop to increase their size in a more sophisticated way (16bit color, sharp edge resize, sharpen filtration, etc).

Similar Messages

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

Hi Peru Bob,
I've tried two images, the results were:
Image 1
Jpg, original file size 923KB, dimensions 848px x 279px.
After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
Image 2
Jpg, original file size 809KB, dimensions 1200px x 1800px.
After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
So, there seems to be a fair file size loss - is this to be expected?

How can I resize my image?

How can I resize my image to be smaller?

You asked about changing the file size
To change the size in Pixels, you use the options at Size in the export dialogue
Regards
TD

Photoshop CC: Have a template that I moved image into. Image is too small. How do I resize the image while in the template? Or must I go to original image file and resize there again and again until I get the right fit?

I have a template that I am able to plug different pictures into at different times. The problem is that when I plug an image into that template, I find that the image is either too big or too small. Is there a way to plug the image into the template and resize the image (and not the template itself) OR will I have to go to the file with the original image and resize it there and then try to plug it in to the template to see if it fits------and if it does not fit, go back to the original file with the image and resize it again and see if that fits---and so on and so on...........? I have tried the" image size" option but it's hit or miss------mostly miss!
Thanks!

Read up on Smart Objects. It looks like you have no idea as to how to create and use them.
Jut create a Smart Object from the layer containing whatever it image it is that you are "plugging into your template". But you do need to learn the application at its most basic levels.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve. You cannot learn Photoshop in a forum, one question at a time.
Or is it possible that you don't even have Photoshop proper but the stripped-down Photoshop Elements?"
If the latter is the case, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you would want if you're working in Elements.:
https://forums.adobe.com/community/photoshop_elements/content
If you do have Photoshop proper, please provide the exact version number of that application and of your OS.
(edited for clarification)

How do you resize a image/picture and save it?

Hello, I know how to resize a image. But how do I save a new image/pictures has Jpeg with new size properties?

Use File>Save As or File>Save for web. Either of these will create a new document as long as the name is different or is in another folder.

How can to resize an image uploaded in to the smart image

Hi
    I have an image uploaded into the smartimage from the local file system. How can i resize this file or create a rendition for this image?
Thanks
Veena

Hi
   I got a reference for the same question from Stack Overflow http://stackoverflow.com/questions/14726485/resize-an-image-resource-in-cq5/16728970#16728 970
I tried the same method
Resource resourceNew = resource.getResourceResolver().getResource(img.getFileReference());
    Asset asset = resourceNew.adaptTo(Asset.class);
    log.error("asset ****" + asset);
    Layer layer = new Layer(asset.getOriginal().getStream());
    layer.resize(200, 200);
    log.error("layer ****" + layer);
                        Image image = new Image(resource);
    String mimeType = image.getMimeType();
    ByteArrayOutputStream bout = null;
    ByteArrayInputStream bin = null;
    try {
        bout = new ByteArrayOutputStream(2048);
        layer.write(mimeType, 1, bout);
        bin = new ByteArrayInputStream(bout.toByteArray());
        asset.addRendition("resizedImage", bin, mimeType);
log.error("asset Bin" + asset);
    } finally {
        // close streams ...
Where img is my Image object and I was able to create a rendition in the dam.
But the rendition I am getting is in File format. Is there a way by which i can change it to png format??? any Help will be appreciable..
Thanks
Veena

How can i resize a image with changing good quality?

i do not know how to resize a image and display to let the user view immediately.
I hope somebody can teach me and show the completed coding

Look at BufferedImage getScaledInstance

How do i resize the image getting captured by ImageSnapshot???

hey guys... so im taking an image of a movie clip using ImageSnapshot.captureBitmapData(myClip);
i need to resize the bitmap data that i get back, the size needs to be 720X486
the code i have is...
var myClip:MovieClip = event.target as MovieClip;
var imageBitmapData:BitmapData = ImageSnapshot.captureBitmapData(myClip);
var pngEncode:PNGEncoder = new PNGEncoder();
var ba:ByteArray = pngEncode.encode(imageBitmapData);
any ideas??? i tried to use the matrix.scale, but i guess i didnt understand on how to use it properly...
any help is greatly appretiated!!
thanks

Hi,
You can also use the below approach to capture the BitmapData of your moviclip(myClip).
So that you can make use of matrix class to resize the bitmap image.
     var myClip:MovieClip = event.target as MovieClip;
     var imageBitmapData:BitmapData = new BitmapData(myClip.width,myClip.height);
    var pngEncode:PNGEncoder = new PNGEncoder();
    var ba:ByteArray = pngEncode.encode(imageBitmapData);
    var m:Matrix = new Matrix();
    imageBitmapData.draw(myClip,m);
    m.scale(1.2,1);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

I am trying to send a file for a contest and my image is 2.7MB and they only want it 2MB how can I resize my image to fit ?????

i am trying to send a picture on a pastel site for a contest and my image is 2.7MB........ they want it 2MB...how can I resize my photo to 2MB???? Pat....

select the photo and export it (file menu ==> export) - there are several options for reducing the size including quality and maximum pixel dimension
LN

How can I resize an image in the header?

I have uploaded my organization's logo into our document, but it is out of proportion to the rest of the document. I've delted it and uploaded smaller versions of the logo and it is still too big. How can I format the image in the header so that it is more reasonably sized?

Thanks. The triangle was buried in the image. If you hadn’t told me where to look, I would never have found it!
Michelle
Michelle Lancto
Jewish Endowment Foundation
a division of the Jewish Federation of Western Massachusetts
Phone: 413-732-9994 Fax: 413-737-4348
<mailto:[email protected]> [email protected]
<http://www.jefwesternmass.org/> www.jefwesternmass.org
<http://www.jewishwesternmass.org/> www.jewishwesternmass.org
JEF_Logos_1101_JFWM for email LOW RES
Confidentiality Notice
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

How do I resize an image in Photoshop CS2?

Hi! I'm trying to resize an image in Photoshop Cs2 with OUT making it grainy or blurred. Please help!? I know there's some key you can hold down while dragging with the mouse but eh I forgot it! o_0 please help!

Jody...
If you have a vector version of the logo, the smartest thing is to resize it as vectors to the size you want, and
then
rasterize it.
Case in point:
I was trying to make a 16px × 16px favicon for my blogspot site, and the only way I could get the details to appear nice and clean was to create the entire thing from shape layers, transform them all in one go to fit inside a 16px × 16px box I defined using guidelines, and THEN rasterize it using the Save For Web dialogue.

How do I resize an image in Lightroom?

Hi everyone, was wondering if someone can help me as am trying to resize and image in lightroom and cannot find where to do it.. please help. thanks alexandra

The Alamy upsizing is nonsense but you can actually use Lightroom export. You only have to use differnet numbers (presets) for different aspect ratios. These are the rough numbers for the aspect ratios I use:
Assuming they want 16x2^20 (16.777.216) pixels rather than 16x10^6 (16.000.000) pixels, the image dimension to upsize with LR are the following:
Aspect ratio 2:3 (portrait or landscape)
~ 5017 x 5017 pixels
Aspect ratio 1:1 (square)
~ 4096 x 4096 pixels
Aspect ratio 16:9 (portrait or landscape)
~ 5462 x 5462 pixels
Aspect ratio 4:3 (portrait or landscape)
~ 4730 x 4730 pixels
You can store those in presets, use sort to sort the images by aspect ratio and export one set after the other with different presets.

How can I resize an image in Preview?

There has been lots of discussion about Preview but non really answers my question. If I resize an image and duplicate it the duplicate over rides the settings of the original - so now I have 2 images the same size which is not what I want. I want the new image smaller but to keep the original the same size as before resizing. Versions seem to do the same thing, and as far as I can make out so does export. I know you can revert one of the duplicate images to get it back to the original size but it is a rather convoluted process.
I know there are very clever people here so perhaps one of you can give me a work flow to do what I require. Thanks in advance.

Of course, you can save some steps by duplicating the original file first, and then resize the copy.
rolando

How do I resize an image w/out skewing?

Im creating an app and have to resize a single image to fit for android, iphone,ipad,ipad 2...all different dimensions. I resize my images but they are distorted or look fuzzy? PLEASE HELP

wsj02261 wrote:
Im creating an app and have to resize a single image to fit for android, iphone,ipad,ipad 2...all different dimensions. I resize my images but they are distorted or look fuzzy? PLEASE HELP
The first thing you need to understand is devices like android device, iPhone and iPads have displays with different Aspect Ratios and different amount of pixels. If you want your images to display full screen on these devices without any boarders or distortion the image being displayed must have the same aspect ratio as the device's screen. The iPhone and iPod have a 3:2 aspect ratio display, iPad1 and iPad2 have a 4:3 aspect ratio display and many android devices have a 16:10 (8:5) aspect ratio display. If you want no borders not only do you need to resize your images you need to crop your images to match your devices aspect ratios. In fact different crops are more inportant then resizing for all your devices can scale images to fit their displays. If an image has a different aspect ration then the display the image will be displayed with borders or will be distorted or be displayed virtually cropped depending on the applet or OS displaying the image.

How do I resize every image in a frame to a certain size?

Similar Messages

Maybe you are looking for