How do I restart samba on OSX 10.6.7?
How do you restart Samba on OSX 10.6.7? I've looked everywhere can't find any docs.
Reason for asking is that on occasion Samba just hangs and I have to forcibly restart the mac to fix it. (restart command just hangs the mac). It seems to have something to do with open connections to Win7 clients and sleep mode.
There are two ways:
1. Go to your Sharing system preferences and uncheck the file sharing service (optionally go to the "Options" in sharing and disable SMB specifically). Then reverse these settings to turn it back on.
2. Use the launchctl utility in the Terminal to stop and restart the samba daemon. Open the Terminal and enter the following command to stop the daemon:
sudo launchctl stop org.samba.smbd
After this is done, redo the command with "start" to restart the daemon:
sudo launchctl start org.samba.smbd
Similar Messages
-
Hello, how can I restart Samba via the Terminal under OS X 10.5.4?
I've tried...
/etc/rc.d/init.d/smb restart
Not valid under OS X
sudo killall -HUP smbd
Not sure if this is working as I get no indication from the terminal that anything has actually happened.
Thank Yousudo killall -HUP smbd
This will only send the HUP signal to all running smbd processes. The processes will trap that signal and do whatever their signal handlers tell them to do (I think a HUP will make them reread their configuration files). You will not get any output when that command completes successfully, so what you're seeing is expected.
Hello, how can I restart Samba via the Terminal under OS X 10.5.4?
smbd is managed by launchd, which is the daemon responsible for managing user and system processes. This piece of infrastructure is what runs programs on demand, for example, and is ultimately the parent process of everything in the system.
The launchctl command is how you interface with launchd. There's a man page that describes how to use launchctl, but in general you could do something like this to stop/start smbd:
sudo launchctl stop org.samba.smbd
sudo launchctl start org.samba.smbd -
Samba share shows up only after I restart samba
I've been setting up a laptop with Arch to use at work and home. The problem is I can not see my samba share until I restart the samba service. The server is available though. I can connect with \\IPADDRESS\SHARE. It's just not listed under Network Places or smbtree.
I have samba under DAEMONS in rc.conf and I've tried starting it in rc.local too. But even if I leave it out of those and start samba manually, I have to restart samba before the share will show up on any client.
The clients are Arch, Windows, and Ubuntu and the share is not available any of them. And the problem happens when I'm at work or at home. I've been googling, but I can't find much about a share being available but not being listed.
My /etc/samba/smb.conf:
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYWORKGOUP
# server string is the equivalent of the NT Description field
server string = Work Files
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.0. 192.168.1. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
# Allow Symlinks (Needed this option after 3.4.6 due to security issues)
unix extensions = no
#============================ Share Definitions ==============================
;[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
wins support = no
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[mike]
comment = Work Files
path = /home/MYUSER/.samba_share
valid users = MYUSER
available = yes
browsable = yes
public = yes
writable = yes
# Needed this option after 3.4.6 due to security issues
wide links = yesI removed the . (and moved the directory to match) but I still have the same issue.
Here's the smbd.log after a rebooting and then restarting samba:
[2010/05/04 07:25:41.262266, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:25:41.266578, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:26:01.041577, 1] smbd/server.c:267(remove_child_pid)
Scheduled cleanup of brl and lock database after unclean shutdown
[2010/05/04 07:26:21.051370, 1] smbd/server.c:240(cleanup_timeout_fn)
Cleaning up brl and lock database after unclean shutdown
[2010/05/04 07:26:45.716653, 1] smbd/server.c:267(remove_child_pid)
Scheduled cleanup of brl and lock database after unclean shutdown
[2010/05/04 07:36:46.016675, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:36:46.017386, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
And log.nmbd:
[2010/05/04 07:25:41, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2010/05/04 07:26:48.718046, 0] nmbd/nmbd.c:71(terminate)
Got SIGTERM: going down...
[2010/05/04 07:27:26, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2010/05/04 07:27:26.544934, 0] nmbd/nmbd.c:696(open_sockets)
[2010/05/04 07:36:46, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010 -
Need to restart samba to access a shared folder
So, that is what happens to me just now, i have to restart samba once the system boots up so i can access any share.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
map to guest = Bad User
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;hosts allow = 192.168.5. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = nobody
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
;[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
;# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
[Shared]
path = /home/Shared
available = yes
browsable = yes
public = yes
writable = yes
[Multimedia]
path = /home/Multimedia
available = yes
browsable = yes
public = yes
writable = yes
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
I use networkmanager, and samba is the last daemon to start....Hi I have exactly the same problem. I'm pretty sure that somehow is related with the hardware of the computer, as only one of my computers seems to be affected by this problem. I'm I a networkmanager user. I have solved the issue by taking away samba from the daemons array in /etc/rc.conf (in fact I putted a ! in front what is the same). An the following the suggestion up. I have made a script "/etc/NetworkManager/dispatcher.d/30_samba":
#!/bin/sh
INTERFACE=$1 # The interface which is brought up or down
STATUS=$2 # The new state of the interface
case "$STATUS" in
'up') # $INTERFACE is up
exec /etc/rc.d/samba start
'down') # $INTERFACE is down
# Check for active interface and down if no one active
if [ ! `nm-tool|grep State|cut -f2 -d' '` = "connected" ]; then
exec /etc/rc.d/samba stop
fi
esac
as indicated in wiki networkmanager and pointed above. Finally, I set the permission for "30_samba" scrip to 755 and the ownership to root:root. Now it works.
Note: If I leave the samba daemon in the array or background it I get a weird problem as only the nmbd but not smbd in up after reboot.
I hope it helps to others. Still I found very weird this behaviour. It has been going on for a long while with this computer although I was lazy to dig in the reasons until now. I will really appreciate if someone more skilful could have a look to the problem.
Last edited by hseara (2011-10-30 10:55:13) -
i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me
If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
How do I re-load the osx Disc when PC is just white blank screen
How do I re-load the osx Disc when PC is just white blank screen
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading. -
I lost connection with the server while downloading an audio book how do I restart the download without paying again?
Go into the App Store, tap Updates, and at the top should appear Purchases. Hit the tab that says "Not on this iPhone" to download again
-
HT1296 what if you dont have a computer to download iTunes then how can i restart my iPod?
what if you dont have a computer to download iTunes then how can i restart my iPod? because my iPod is telling me to hook it up to iTunes but there is no way for me to do that if i cant download it on a computer i dont have..
You need to connect the iPod to a computer with iTunes and an internet connection and restore via iTunes
iTunes: Backing up, updating, and restoring iOS software -
My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??
You can use any computer but your data will be lost if you have no backup.
-
HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode
How can I restart my mac book pro 11 inches when it's on target disc mode
Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.
-
TS1363 how can i restart my 2004 ipod click wheel?
How can i restart my 2004 model ipod (click wheel) on my computer and on my itunes?
Connect the iPod nano to the computer the exact same way you set up the old one. You don't need to create another Apple ID, iTunes Store account, or iTunes library.
(98196) -
How do I restart Time Machine back-up from scratch?
How do I restart Time Machine back-up from scratch? I have a MacBook Air that was my wife's - now given to my daughter for school. My wife never used Time Machine to back up (she simply copied files to an external drive), so before clearing her files off the Mac HD, I tried using Time Machine for the first time with an external HD. However, the Time Machine back up repeatedly failed after about 2GB of 28GB of files. I manually copied my wife's 28GB of files to another external HD and deleted all the files off the Mac HD. I then reformatted the external Time Machine drive. But when I try to use Time Machine to back up the MacBook Air as it is now with my daughter's files on the Mac HD to the external TM drive, Time Machine acts as if the 28GB of my wife's deleted files are still on the Mac HD and fails back-up after counting to about 2GB, even though there aren't even 2GB of files on the Mac HD now and nothing on the external TM drive. I don't need to save any back-ups of how the MacBook used to be - I just need to start from scratch with how the computer is now. Can anyone please tell me how to get Time Machine to think the MacBook is a brand new computer and act as if it's a first time ever back up? I tried updating to Yosemite, and tried renaming the computer in System Preferences>Sharing, plus (as noted above) deleting all the old files off the Mac HD and reformatting the external Time Machine drive - none of that worked. All I can do at the moment is manually copy my daughter's files to an external HD - very frustrating.
Hmmm.. Office is not hard to restore.
You have something major wrong (Yosemite being the primary one).
Do a verify of the source drive.. to do that you will need to boot to the recovery.. and run the disk utility from there.. it sounds like your main disk is corrupted.
Once that is complete, delete the current setup of TM and try again.. use the widget to find out why it is failing..
See Troubleshooting.
A1, A4 and A5 for further info.
http://pondini.org/TM/Troubleshooting.html
Good luck with it..
I would also download carbon copy cloner.. it is $40, but you can use it free for a time.. forget if a week or a month??.. to try out.. and make a proper backup before you start.. CCC is far more reliable than TM.. and in fact you might decide to simply forget about TM if it works and pays the $40.. because you can produce a bootable clone on the external drive which is a heck of a lot easier to use than TM. -
How can I return to use OSX (Yosemite) after installing Windows 8.1?
How can I return to use OSX (Yosemite) after installing Windows 8.1?
I cannot find Boot Camp on my iMac (late 2013) with windows installed. So I downloaded it, but I cannot run it because of an error (x64...). I tried to use my USB stick with bootcamp installed but nothing. When I turn my iMac on it starts automatically with windows. I tried to search it, but I found only the setup and it doesn't work. How can I get back to my APPLE iMac? How can I use OSX?
Excuse me for the (maybe) uncorrect language, I speak Italian.Hello!
You can start your Mac up with the [alt] (sometimes [option]) key pressed and you will get the Startup Manager. -
HT1430 How can you restart your iphone if your lock button does not work?
How can you restart or turn off your iPhone if the lock button does not work?
The best way is to let the battery die. Or you can reset the phone settings which restarts everything.
-
I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD with OSX Lion as far as I know.
Ideally, you should clone your HD as Bimmer 7 Series explains.
However, if your computer originally shipped with Lion or Mountain Lion, a clone is not necessary to merely reinstall OS X. OS X Internet Recovery will create a recovery partition, download the installer package, and install it on a completely empty SSD or HD.
Even if your computer shipped with Snow Leopard, it may be eligible to download a firmware update that creates the same ability: http://support.apple.com/kb/HT4904
Maybe you are looking for
-
I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though pr
-
Is it possible to make an MPEG-2 from Final Cut Express ?
I need to make an MPEG-2 file, exported from Final Cut Express 4. But I don't see an option for it.
-
"Bad page state in process swapper" with Oracle Linux 5.9
Dear All, We got "localhost kernel: BUG: Bad page state in process swapper pfn:5e13c2e" when booting Oracle Linux 5.9. The system is installed with - 1. CPU: 2 x Xeon E5-2690 2. Mem: 384 GB 3. QLE 2562 FC 4. Oracle Linux 5.9 (64-bit) (2.6.39-300.26.
-
My friend had one and we decided to trade my PSP for it. Well I go home and I went to hook it up to my computer and it told me to restore it. I clicked restore but it did not finish and it stopped recognizing my iPod! HELP!
-
HT5312 how to restore my apple id security
i forgot my security qustion answer ??