How do I route multiple SB302 switches at different sites and their VLANs?

Hello Cisco Support Community,
First thank you for any replies.
The video posted today on 302's and multiple VLAN's on one switch was nice.
Thank you, I have that working but it's not really what I need.
Though pictures are worth a 1000 words so I hope someone will post something similar to my question.
I have 7 - SB 302-08 switches with the most recent firmware. (updated firmware today, thanks to the video, and TG for the CLI)
All 302's are configured for layer 3.
This is my first experience with the SMB line of switches.
I have a main office and several satellite branch offices.
All locations are connected back with a "Q to Q" circuit on individual ports to a vendor supplied switch at the main office.
I need to link all branch office 302 switches back to the main office 302 switch and allow traffic amongst them.
Mainly traffic between each branch office and the main office.
There maybe a future need to incorporate VoIP on them as well, but that is a back burner issue.
These locations will have an individual VLAN and 302 switch but need to receive data from the main VLAN and possibly others.
I have a "core" SB 302 setup at the main office with its own VLAN.
Each branch switch has its own VLAN.
I would also like to have a centralized management VLAN for the switches.
In trying to configure the core 302 I keep losing connectivity and having to reset it.
On the branch switches I end up getting them to only link to themselves with different IP's and not the core.
I'm assuming this is caused by my not configuring interconnectivity using ACL.
Please let me know if you need additional information.
Thanks

Alllan,
Well first you want to make sure you are running latest firmware 1.1.1.8 I do believe
Next either console into the switch or you can turn on SSH/Telnet under Web gui (Security••àTCP/UDP services and make sure SSH/Telent is enabled)
Now we configure the switch via Cli
We need to enter global configuration mode.
Configure Terminal
(next add our vlans)
Vlan database
Vlan 10
Vlan 20
Vlan 30
Exit
(you can run show command to see your vlans)
do show vlan
(Now configure the port how you would like)
Interface GE1
Switchport mode access   (this is making Gigabit port 1 an access port)
Switchport access vlan 20 (this command is changing access port vlan from 1 to 20)
(less configure a trunk port)
Interface GE2
Switchport mode trunk (this makes port 2 for trunking)
(Now less add our Vlans)
Switchport trunk native vlan 1
Switchport trunk allowed vlan add 10,20,30
Exit global configuration
(Use this command to copy your settings to startup)
Copy running-config startup-config
(Some screen shots attached)
I see you have a WRT54G router which i don't think support vlans unless you have 3rd party OS installed.
So currently is the SG300 swtich operating in layer 2 or layer 3 , guessing this is why you choose to move up to 300 series switch?
If the switch is not in layer 3 mode but in layer2 when setting it to layer3 the switch will default all pervious settings.
If the switch is set in layer 3 mode you might have forgot your default route
(Command setting default route)
configure terminal
ip route 0.0.0.0 0.0.0.0 192.168.1.1  (192.168.1.1 being address of your WRT54G)
Now you would need to set up ACL's to deny and allow what traffic you wanted to filter on the SG300
Also reading your post we would need you to call into support center SBSC @ 1-866-606-1866
This way we could get a better idea of your current configuration and assist with fixing or finding a solution for you.
you have 1 year phone support with this product
Thanks,
Jasbryan

Similar Messages

  • How do I select multiple files under "Get File Info"and lock or unlock all?

    How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

    Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • How does muse tell the difference between a temporary site and my free 5 sites with my creative cloud membership?

    how does muse tell the difference between a temporary site and my free 5 sites i get with my creative cloud membership?
    because they both use .businesscatalyst.com and there's no option to say that it is a temporary site not a finished site i wish to publish to my creative cloud account.

    Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Is there a way to set up multiple displays to show different DeskTops and/or multiple Full-Screen apps independently?

    Hello Apple users/ develpers.....
    I have been thinking about this long and hard and it seems like there should be some way to display separate Full-Screen Apps and/or mulitple Desktops.
    This would be a key feature that would make Lion surprisingly more efficient than any of its predicessors.  However, I have gone into System Preferences>Displays and could find no way to page through and get different desktops to display.  I always could extend the desktop, but why do that when I can simply use multiple Desktops and assign them to specific displays.
    (For example While on the MacBook Pro I could be doing a project in FinalCut while External Display 1 could be displaying iTunes and Display number 2 could be displaying MS Word.  And between each I can switch between each app without changing the monitor display.)
    I could also seeing this being extremely helpful in DJ and/or PowerPoint presentations.  In a PowerPoint presentation I could use the projector/display to show the individual Slides, while on the computer/laptop I could control other materials.
    Or in a DJ situation, I could be controlling iTunes from the computer, displaying a set of animations that I created in Flash/ToonBoom or another animation program, while still being able to work off of an independent display to do my homework or major project.
    The whole purpose of multiple displays would be to have multiple access to each of those.  And so if there's another APP I need to control them, or if there is a setup command I don't know about, I'd like to know right away.
    Also, if Apple hasn't really implimented this (and their OS is designed to have these features) then I guess this'd be my first recomendation to them as something that they need to fix.  This alone could be the key to crippling PC.  Don't let Windows 8 have a back door!

    Not available, why not suggest it here.

  • Want to give my old IPOD to husband but how do we share music etc - he wants different music and apps to me how can this be done without me deleting my stuff?

    Oooppss! Put the whole question in the title bar!
    What I would like to know is how do I get to keep my stuff different from my husbands, there are things that we both like and things that we don't. I dont want him to delete off my old IPOD if it means i have to keep installing again. I dont want to set up a new account because we want to share music and videos

    You'll notice that each iPad is identified by name.  See image below.  Highlight the appropriate iPad and configure iTunes the way that you wish.  The second image below is an example for apps.  You'll see something similar for movies, TV shows, etc.
    The only minor problem is app updating.  IF you choose to do it from inside iTunes, it's a minor nuisance.  Each app is permanently associated with whatever Apple ID was originally used to obtain it.  If you're logged in to the wrong ID, you'll need to log out and back in again.  On the bright side, if you update from the iPad, all you need is the password for the correct ID.  The iPad takes care of the rest.
    Mail is a special case.  I use Mac Mail and the setup is pretty much automatic.  What are you using?

  • How to back up multiple iphones/ipads with different icloud accounts but same apple id

    I would like to back up 3 idevices each with different icloud accounts to itunes. But they use the same apple id so that itune purchases can be installed on each device (2 iphones and 1 ipad).
    All I want to do is create a backup in case the phones need to be restored. I also want to back up before downloading iOS 8.
    The Macbook Pro that I will back up to has one user and one itunes library.
    Is this possible without mixing up address books and contacts etc? Appreciate if some one could direct me to detail step-by-step instructions if they exist or please tell me how I can do this.
    Thanks.

    With Family Sharing they don't need to have the same Apple ID anymore.
    But backups to iTunes are kept separate among multiple devices; Apple ID and iCloud isn't involved at all. Just make sure the devices do not have the same name.

  • How do you use multiple displays with a MacBook Pro and iMac

    I have an iMac and a MacbookPro laptop both upgraded to OS X 10.9 (Mavericks).  I'd like to use multiple displays with them.  Can I do this without an Apple TV?  They are both on the same network.  If I can, can someone please give some instructions on how this can be done?
    Thanks!

    Both computers have ports for external monitors. Check your user manuals. Only one display can be added to the MBP, but newer iMacs have dual Thunderbolt ports.
    Do your own Google research to learn what to do, but reading your manuals should be all you really need. It' not rocket science yet.

  • How do I manging multiple copies of movies for AppleTV and iPod in iTunes?

    I do not have an AppleTV yet, but I am considering getting one. I was wondering how those who have both an iPod and ATV manage the syncing of Movies that may have different resolutions?
    If I want to have the same movie on ATV and my iPod I would need two copies in iTunes at different resolutions, correct? At least when I look at the iTunes export in iMovie it shows I can have a higher resolution for the ATV than the iPod.
    So, how do you manage the auto syncing of these multiple copies so that they aren't all copied to both devices? iTunes doesn't have good Movie management as far as sub-folders, etc. I would like iTunes to treat these copies as one movie and only sync the appropriate resolution for the device.
    I also notice that multiple copies then show up in FrontRow as well. It would be nice if only the highest resolution would show up.
    Thanks,
    Scott

    Just create 2 different playlists like
    Movie-ATV
    Movie-iPod
    Put those video files with higher resolution on playlist Movie-ATV
    Put those video files with lower resolution on playlist Movie-iPod
    in iTunes Preferences choose your ATV only to sync the 1st movie playlist - and your iPod only to sync the 2nd one.

  • How do I include multiple hyperlinked indices in a document and include keyword different from the word they link to?

    I would like to include multiple indices in my ID document. How do I do that? I only managed to create a single index. And how do I let an index refer to a different word than the one in the text (e.g. "car" and "plane" are in the text but their index entry is "vehicle")? And how do I turn all index entries into hyperlinks?

    I would like to include multiple indices in my ID document. How do I do that? I only managed to create a single index. And how do I let an index refer to a different word than the one in the text (e.g. "car" and "plane" are in the text but their index entry is "vehicle")? And how do I turn all index entries into hyperlinks?

  • How do I open multiple Safari pages in different Spaces?

    My wife's MacBook Pro will open Safari in different Spaces by opening Safari, switching to a new space, then holding down a single click on the Safari sign located in the Dock. It pulls up several options including Open New Window. When I click on that, it will open another session of Safari, while retaining the session running on the other Space.
    My new MacBook Pro will not do this. I have looked and cannot find any topic addressing this issue. Please help me with this, it is a more practical option for my work than just opening multiple tabs in the same space.

    It slightly darkens the entire screen, shrinking my page some, and gives me three side by side options including, Quit, Hide, Options. The Options tab expands into three more options of Keep in Dock, Open at Login, Show in Finder. The first two of these tabs are checked.

  • How can I open multiple instances of the same folder and web browser in different desktops in Lion?

    I've selected "none" for association but it doesn't work. In other words, I have a Dropbox folder on my desktop. I'd like to be able to open that same folder using the same shortcut on different Lion desktops. However, whenever I try to use the same shortcut on a different desktop, it switches to the one where it's already open. Same problem with web browsers; if I try to just click on a web browser to create a new window, it will take me back to the other desktop.
    I didn't have this problem before I had to replace my hard drive and update everything again. I am aware of the "restart Finder" option as well as associating programs with individual desktops. All of the things in question are currently selected as "none."
    Any help would be greatly appreciated!

    I just set Safari's option to None. That is I right clicked on the dock, selected options, and chose none. Also, in Mission Control's tab of System Preferences I clicked Off When switching to an application, switch to a space with open windows for that application. That let me open a new Safari window no matter what desktop I was in. But I had to do both. Just setting the desktop option to none didn't seem to do it. Finder seems to work okay with just the none option set.

  • How can I distinguish multiple tabs of the same site in the tab bar?

    Hello,
    I've been following some massive open online courses (MOOCs) and its been necessary to have several tabs open at the same time for the same site. I would like to be able to distinguish these tabs by being able to put a tag instead of the site url ('instructions', 'template', 'code', 'scratch', 'docs' etc. etc) and/or a colour code.
    Does anyone know if and how this can be done?
    Many thanks

    This one colors tabs, but the author warns that it doesn't work with other tab-related extensions, so you probably need to keep searching for one that does everything you want:
    https://addons.mozilla.org/en-US/firefox/addon/colorfultabs/
    If you don't find a do-it-all extension, you can modify the tab titles with a userscript that is specific to that website. This is because the tab displays the text designated in the page as its title.
    You either could "hard code" the list of words for each of the pages, or you could have a script extract information from the page, for example, the first main heading, or some other predictable bit of data. The script then would insert your preferred wording as the title of the page and Firefox will show that on the tab.
    To see how that appears, so you know whether it would be useful, you could do this experiment:
    On a web page that has useless tab text, open the Web Console using command+alt+k (Windows: Ctrl+Shift+k). In the line at the bottom next to the caret, paste the following code and press Enter:
    document.title="Magic!";
    If you decide you want a script written for this, you could try the request forum on userscripts''.''org:
    [http://userscripts.org/forums/2 Ideas and script requests - Userscripts.org]
    Although some people offer small payments, that usually isn't necessary to motivate people to help.
    Let me give you a brief warning about that site, though: over the past year, a lot of popular scripts were duplicated and reposted with additional code that hijacks your Facebook account. Be cautious when installing scripts, check the reviews, make sure there are no references to Facebook.

  • How do you have multiple iPhones, on the same computer, and on the same iTunes log in?

    My wife has the iPhone 4 and rarely syncs (1 time in the last 6 months) to our PC, so I updated her phone when she synced.  I have the iPhone 4S and sync everyday to the same PC and same iTunes account.  She synced her phone to our PC yesterday and all of my info is now showing on her phone (apps, pictures, etc) ... I have researched and do not see a solution on how to fix this?

    First thing to do is make sure each device has a unique name. You can change the name displayed in iTunes by connecting the iPhone to iTunes and double clicking on the name of the device.. Then type a new name. Wife's iPhone and dads iPhone for example.
    Then when you sync a device be sure to carefully select those items you want on that device and deselect those items you don't want. After you have made the selections you want click on Sync or Apply.

  • How to Set Up Multiple Muse Files for One Site

    I'm creating a massive web site, currently over 900 pages, heavy on images and file downloads. Currently the file size is 700 MB and growing. Muse starting moving PAINFULLY slow (just pasting a text box is taking over 15 minutes, all while the rainbow ball spins), but with smaller muse files everything works great. Due to the slow down, I want to be able to break up the file into sections but not sure how to export and upload the site to work properly.
    Is it as simple as deleting the extra sitemaps/index pages?
    If needed, working on iMac, OSX 10.9.2; 2.7 GHz Intel Core i5; 8 GB ram.
    Thank you in advance for any help.

    Hi Andria,
    Please refer to the reply by Zak in this post, Re: How large of a site can muse handle?
    You can use the above thread for any follow up questions that you might have.
    - Abhishek Maurya

  • How can I delete multiple received email msgs. at once (and empty all Trash msgs. at once)?

    With iOS7 I can't select,mark and delete all received msgs. at once as I could in some earlier versions. I can select all but only can delete them one at a time by tapping the trash barrel.  How can it delete at once all the selected (red dot) inbox msgs, and them delete them from the Trash since that's where they end up?  Thanks!

    As long as they are in a continuous range, select the first, then hold SHIFT and click on the last. All in between will be selected. You can also use CTRL-click to add or remove individual songs from the selection. When you are ready you can delete the selection.
    You might find iTunes Folder Watch useful if your missing files are scattered randomly through the library.
    tt2

Maybe you are looking for