How do I run 2 or more VIs simultaneously?

Hi. I'm trying to create an application, where I need two or more VIs running at the same time. My problem is that when I call a subVi, my main VI is frozen until the subVI finishes. Does anyone know how to programmatically call/open/run a VI or subVi without freezing the main VI?
- Thanks alot in advance.

Hi
I attach you a simple example. One subvi used 4 times, all of which using different interrupt times. One main vi, which contains the four sub vis.
If you push the button "show dialog" a window appears. If you then watch the numeric indicators, you can see that indicator "numeric" (the one from the main vi) does not count up, because the main vi is blocked by the dialog, but the other ones still count up.
Hope this is what you are looking for. To exchange data, I used references, but also there are different ways (global variables, functional globals, references, queues).
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
ParallelVIs.llb ‏58 KB

Similar Messages

  • How do I run Lightroom 3 and 4 simultaneously?

    When I try to run LR3, while having LR4 open, LR3 magically knows that there is already another version of lightroom running and will, extremely inconveniently, refuse to run, instead moving focus to the already open LR4.
    Is there a way to make LR3 actually run at the same time as LR4, instead of making the decision that I should want to use LR4 exlclusively for me?
    Some catalogues we work with cannot be upgraded to LR4 format yet because they are shared with clients, and not all clients are on LR4 (hopefully, "yet"). Being able to perform edits in LR4 and then moving the edited-exported copy into an LR3 catalogue is required, and this is an incredibly painstaking chore if it involves closing LR4 just to start up LR3.

    Indeed, installed in separate folders, and the executables have different names. This does not seem to matter - somehow, LR3 is able to query whatever silent Adobe service is runnign that some version's already running, and refuses to load. The same happens the other way around - first running LR3 and trying to run LR4 will simply not run LR4 and instead move focus to LR3.
    Rikk's suggestion will have to do for now, but it's still a bit of a chore to have to artificially chop up the workflow. Does anyone know what's responsible for telling LR that another version's already running? (can that be temporarily disabled and then turned back on after LR3 and LR4 are running? =)

  • I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?

    I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?  Will the new one become less effective if it sits around too long?

    How much capacity is remaining on your current battery?
    Check your power status
    From the  menu: Hold OPTION and click System Information... èHardware è Power
    Copy and Paste in your reply.
    The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
    Long term storage (6 months):
    Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
    http://www.apple.com/batteries/

  • How to shedule an abap report to run paralely in more background session

    I wander how to shedule an abap report to run paralely in more background session.
    I am afraid of parallel locking.

    Hi,
    You can schedule different jobs with same program name.
    Use ENQUEUE_ & DEQUEUE_ to lock/unlock the records being process. The lock objects can be created in SE11.
    Best regards,
    Prashant

  • Mayday, maday !!! could someone teach me how to run my passport more than one day

    I just got my passport yesterday ,could someone teach me how to run my passport more than one day.
    please see the picture, I just received some calls and surf the internet less than 1h today.
              thank you a lot.

    press both volume keys down for 30 seconds and see if it persists after
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • How can I run a vi developed with 7 Express?

    How can I run a vi developed with LabView 7 Express on another machine ? Do runtime versions exist ?

    Apparently, you want to run it on a machine that does not have LabVIEW installed.
    To make a standalone executable of your LabVIEW program, you need to have the Application builder (included in LabVIEW professional and higher, avaliable as an add-on for base and full).
    To run the application, the target system need to have the LabVIEW 7.0 runtime installed (available as a free download).
    There is also the LabVIEW Player. In this case you need to digitally sign your VIs and there are a few limitations. It is meant for for sharing code ideas and is not a viable substitute for the appl
    ication builder.
    Of course you could also get a second copy of LabVIEW.
    Some other options that would work in a very narrow set of situations: Read your LabVIEW license agreement. Under certain conditions you are allowed to install a second copy of LabVIEW on your home computer. If this is for personal educational use only and you qualify, you could also buy the LabVIEW student edition.
    LabVIEW Champion . Do more with less code and in less time .

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • TS1702 Hello I would like to report game loft order and chaos that's I but rune stones buy my visa around 300 usd and runes was on sale but thy don't add the rune stones it's 5700 Rune stones  I report to game loft 6 time and thy ignore me I'm here to Com

    Hello I would like to report game loft order and chaos that's I but rune stones buy my visa around 300 usd and runes was on sale but thy don't add the rune stones it's 5700 Rune stones  I report to game loft 6 time and thy ignore me I'm here to Complaint that to iTunes I wish you help me for this complaint cause this game loft always ignore people only take moony and no replay . Ty

    You are not addresing Apple here. Were are all just users like yourself. Contact Apple/iTunes by:
    How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

  • How SAP standard run the interest calculation in AR module

    Dear expert,
    would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
    Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
    What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
    On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
    Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
    Please help.
    Regards,
    Karen

    Hi,
    Thank you for the promtp reply.
    I still have query would like to seek for your advise.
    1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
    2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
    On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
    3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
    4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting  F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
    5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
    a)How the program calculate those overdue invoice for example: does sap calculate the interest  base on interest + due amount until the customer made the payment?
    b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
    Please help.
    Regards,
    KH

  • How can i run 2 i tunes accounts on the same computer without songs duplicating?

    my wife and I both have ipods, how do you run an account each on the same computer without files syncing on both ipods/ libraries?

    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

    Hi,
    I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
    I am almost lost to find the operating tools.
    1. How can I copy files from hard drive to computer and vis-a-versa?
    2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
    3. No right click works on track pad?
    4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
    5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
    I will very much appreciate if you could email me the with the solution/answers please.
    Regards,
    Khagendra Limbu

    1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
    Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
    Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
    Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
    Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
    2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
    3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

  • How can I run a packet sniffer on a Router or Switch

    I have on my network several router 1700 series and switches Catalyst 2950 and I want to know how can I run ethereal on those babies to monitore what comes and goes

    The two most common methods would be (the old way) insert a hub (not a switch) in-line between the devices withthe traffic you wish to monitor or (the new way, for Cisco anyway) using port mirrroring.
    A hub (not a switch) will repeat every pulse that passes on the line to the analyzer.
    Since finding a new hub these days is virtually impossible (even some of the things sold as hubs are really switches), the more common way, at least in Cisco environments, is to "SPAN" (aka Port Mirroring) the port of the device whose traffic you'd like to monitor.
    Here's the setup guide for a 2950:
    http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swspan.html
    Good Luck
    Scott

  • How can I run a Buffered Contour repeatitively using on-board programming?

    I have a 400 point countour move that I would like to run for 100,000 cycles. How can I use the buffer over and over again using on-board programming?

    Jed,
    Thank you for your comments. They did not however answer the question. I am asking about buffered contour moves. Most of the Onboard programming examples and tutorials deal with repeating of linear or circular moves. I have been using the onboard programming for some time, and have set up and run may Onboard DO WHILE Loop programs with good result. I have however been having some problems with the onboard progams running reliably for more than 1000+ cycles. I have spoken with Mr. Austin about this, but we have not been able to resolve this problem.
    The buffered contouring options are of great value to me, as I would eventually like to follow some pretty complex pathways that require changes in velocity as well. I can sucessfully complete one cycle o
    f buffered contouring, but that is all. I can repeat this cycle, but only by buffering two or more iterations of these points. Each time you write to the buffer, it is memory intensive, and the HELP files urge you to not write to buffers too much while motion is in progress. I have worked with the vi that lets you progressively write a large number of points to a small buffer and a while loop. This works great for a few cycles, but I would like to preform 100,000 cycles. I am having trouble getting the same type of vs to work for this many points.
    I would like to know if it is possible to have a buffer that you can read from recursively, without it being erased after it is read.
    If not, how would it be best to approach this problem?
    Thanks,
    John

  • How to use same page fragment more than once in a page,

    Hi Gurus,
    How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
    I want to use the same page fragment multiple times on the same page with different tabs.
    I want different ApplicationModule Instance for the page fragment in different tabs.
    So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
    I've dragged the taskflow to page and created regions.
    I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
    Can anyone help me how to resolve this issue.
    Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
    Thanks,
    Satya

    java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
    +id: j_id_id1
    type: javax.faces.component.UIViewRoot@1d23189
      +id: d1
       type: RichDocument[UIXFacesBeanImpl, id=d1]
        +id: j_id_id5
         type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
          +id: j_id0
           type: javax.faces.component.html.HtmlOutputText@bc252
        +id: m1
         type: RichMessages[UINodeFacesBean, id=m1]
        +id: f1
         type: RichForm[UIXFacesBeanImpl, id=f1]
          +id: pt1
           type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
            +id: ps1
             type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
              +id: pt3
         at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
         at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
         at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
         at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
         at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID =  CONTEXTID =  TIMESTAMP = 1262712477691 
    WatchAlarmType: AutomaticReset
    WatchAlarmResetPeriod: 30000
    >
    <JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
    oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
    Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
    DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
    DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
    DIA-48494: ADR home is not set, the corresponding operation cannot be done
    Action: Ensure that command line tool "adrci" can be executed from the command line.
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
         at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
         at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
         at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
         at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
         at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
         at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
         at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
         at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
         at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
         at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
         at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
         at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
         at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
         at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
    set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
    set homepath diag\ofm\defaultdomain\defaultserver
    create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
    Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
    DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
    DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
    DIA-48494: ADR home is not set, the corresponding operation cannot be done
    Action: Ensure that command line tool "adrci" can be executed from the command line.
         at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
         at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
         ... 19 moreI get the above Error.
    I have checked the bindings and it has 2 instances of the taskflow.
    I have changed the backingbean scope to backingBean

  • How to I find a compatible, more powerful hard drive for my macbook 13 inch late 2008?

    How to I find a compatible, more powerful hard drive for my macbook 13 inch late 2008?

    There are many sources for compatible 2.5" laptop SATA interface hard drives and SSD's.
    I've used Other World Computing (www.macsales.com) for a number of upgrades, and highly recommend them if you're in the US. OWC also posts helpful videos on YouTube showing step by step removal and installation instructions and the tools required for most Mac models. If your old drive is still functioning, but you're simply running out of space, you might also consider purchasing an upgrade kit that includes an external 2.5" drive enclosure with USB interface. Then you first install the new drive in the external enclosure and 'clone' the contents of old drive to it, then swap the old drive for the new one, and use the old drive in the external enclosure as a backup drive, to test new software and OS upgrades, or to store video, photos, and audio.

Maybe you are looking for