How do I run Remote Panel Connection Mgr on server with just runtime & exe

We are running a LabVIEW 6.1 executable on a PC with Windows2000. We have remote panels enabled and the system seems to be working fine. However, we would like to be able to run the Remote Panel Connection Manager in order to monitor the load we placing on our communications system. I can run it while in development mode, but the option is no longer available under Tools once I create the exe. On the actual server machines we do not have the full development system (only the runtime engine) installed. Is there a way to run the Remote Panel Connection Manager while running just the exe with the runtime engine?

The manager is a separate VI. It's located in \project\remotepanel.llb. You could try building an separate exe from it or including it as a support file in the exe you want to run as a remote panel. If it does run, you might have to create a custom menu in order to call it from your exe.

Similar Messages

Remote PowerShell Connection to Lync Server With Kerberos authentication Fails

Hi everyone ,
Remote PowerShell to Lync Server With Kerberos authentication Fails .. Is there any reason for not being able to connect when authentication specified as Kerberos . But exactly same code works when Authentication is specified as "Negotiate"
E.g :
Error -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Kerberos
[serverName.lync.com] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. The authentication mechanism requested by the client is not supported by the server or unencrypted traffic is disabled in
the service configuration. Verify the unencrypted traffic setting in the service configuration or specify one of the authentication mechanisms supported by the server. To use Kerberos, specify the computer name as the remote destination. Also verify
that the client computer and the destination computer are joined to a domain.To use Basic, specify the computer name as the remote destination, specify Basic authentication and provide user name and password. Possible authentication mechanisms reported by
server:   Digest Negotiate For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Works -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Negotiate

Hi,
Please double check if Windows Update is the latest version, if not, please update and then test again.
Please also ensure that the workstation you are using has network access to the Certificate Authority that signed the certificate.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

Hi Dave,
You need to type the server name that was assigned by your mail administrator for the server running Exchange. So please ask your administrator for the Server name. Thanks for your understanding.
For more information, here is an article for your reference.
Add or remove an e-mail account
https://support.office.com/en-ca/article/Add-or-remove-an-e-mail-account-ff7c7735-6117-4b0d-aef6-8aa8a072f60f
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

How to make a remote panel file dialog open remote directory from any computer

Hello to everybody. I am using Labview 6.1 and I would like to know how to make a remote panel file dialog open remote directory from any computer (Not only from a specific computer. If I open the file with a specific computer, I have to conect the path of the remote machine, but if I don´t know which remote computer is going to run the aplication, how can I do it?)?

Hi!
first you have to know progammatically the name of the remote pc connected to your server: this is a problem!
I did not find a straigth way, LV 6.1 doesn't allow much progammatic control on the remote panel connection feature, but I'm confident that in the next LV version this will be improved!
The point is that the Remote Panel Connection Manager (from the Tools menu) has all the informations about the connection: client name, server vi and whatever.
This application is embedded in the \PROJECT\REMOTEPANEL.LLB and consists of a set of password protected vis.
So here's the trick: use VIServer to grab data from the rpcm Get Server Data.vi when the Remote Panel Connection Manager is in run mode. By this you get all the informations (not only client name)o
f the remote panel connection. See my example.
By the way use client machine name to build the file dialog function input path.
If anybody has an alternative method it would be more than appreciated to share it.
Good luck,
Alberto Locatelli
Attachments:
get_remote_machine_data.vi ‏151 KB

Real-time 8.6 Remote panel connection exceeds max number of licenses- with no connections

I've been using the remote panel right along with no problems to connect to my Compact Fieldpoint. This morning I accidently opened the connection twice on the same computer and tripped the "Remote panel connection exceeds max number of licenses" error. Now it will not let me connect anymore from my computer. I've tried clearing cookies, cache and history in Internet Explorer and rebooting my computer. I've fired up the Remote Panel Connection Manager which shows no connections, and the NI License Information window does not show any connections which have been denied due to max # of clients being exceeded. Is there a way to reset this without having to reboot my RT controller? I'm running RT8.6 and LV 8.6 Full Dev System and understanding that it should come with 1 remote panel license.
Thanks
maat
LV2014

The boss wanted to see an updated feature, so I was forced to deploy a new version and reboot. Problem went away as I suspected it would.
I did manage to make the same mistake again this morning (launch the remote panel in 2 different MSIE windows) and after closing them both I could reconnect. Must be a glitch or a bug? It'd be interesting to see if anyone else has this problem. For now...solved, but it would be nice to see a way to fix this without rebooting.
Message Edited by maat on 10-22-2008 10:10 AM
maat
LV2014

Is it possible to limit the number of remote panel connections to a vi?

Hello,
I have an application running on a RT PXI and I'm using remote panel to access it. My licence allows me to have multiple remote connections and it's ok as I sometimes need to open multiple remote panels at the same time. However, I would like to limit the number of connections to 1 for a particular VI. Is it something that can be done?
Regards,
Patrick Lessnick
Solved!
Go to Solution.

Patrick: If you right click on your target PXI system in the project exporer, select Properties>Web Server>Browser Access you can select who you let have access to your VIs. Likewise, in the Visible VIs section of Web Services you can limit which of your VIs you want people to be able to see.
If this isn't enough control, from your run time application on the PXI system you can write a startup VI (in parallel with your main application) to monitor the Remote Panel: Connections to Clients Property of the real time server. Once this monitor application sees a connection you can take any number of actions to prevent more than one connection, deny access to specific IP ranges or what have you.
I am assuming you are using LabVIEW 2009 and MAX 4.6.1 but it may apply to earlier editions.
Hope this helps.
Bill

How do I run Windows software on my MacBook Pro with OS X Mavericks

How do I run Windows software on my MacBook Pro with OS X Mavericks? I want to run a TurboTax program to amend an old tax return. Program is not available for OSX.

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

HT204053 How do I fix "unable to connect to icould server"?

How do I fix "unable to connect to icloud server" message on my laptop?

Hi there Danbase,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
-Griff W.

How many Apple TVs can you connect to a server without it dying?

Hi
I'm interested in setting up a media server on a boat for up to 40 cabins and was wondering if it's possible to do this with apple TVs? Any comments? I can split the number of Apple TVs going to a server into floors of approx 15 each, but was wondering what i'd need to make it work? Just a big meaty PC with loads of Memory or is it just destined to fail?
I'm wondering how many apple TVs you can connect to a server. Obviously wired as wireless is just not an option.
Thanks
Paul

Assuming your 40 cabins are not all for your own personal use, have you considered licensing issues relating to streaming to up to 40 TVs on a boat?
Unless you have an appropriate license with a supplier that provides legal music/movies in a suitable format for AppleTV, I would imagine installing such a system in a non-personal environment would be a bit dubious.
There are undoubtedly commercial solutions of one kind of another, but AppleTV is not marketed in this way as far as I'm aware.
AC

Unable to connect to essbase server with Smart View

Hi,
I'm having trobules connecting Smart View in order to make some adhoc analysis, however I could perfectly establish connection with Planning and navigate through web forms in excel.
The address I'm using to connect to Essbase is: http://<server>:19000/aps/SmartView and the planning url is http://<server>:19000/HyperionPlanning/SmartView
I've been already using those urls in other server with version 11.1.2 but now that I'm trying to connect to a server with v11.1.1.3 I just can't. Whenever I connect to Planning in order to see the forms a prompt appears with the message saying that "I'm connecting to a server with an older version" but I could perfectly work with the forms. When I connect to essbase, I can see the Applications but I just can't make any adhoc analysis.
Could anyone have any idea of what could be happening?
Thanks in advance
Edited by: user9143843 on Jan 13, 2011 4:58 AM

Thanks for your response, I've already checked that port and keep getting the same message "Common Provider null datasource error". I can see the applications but can't get any further than that, no analysis adhoc, no smart slice, only disconnect :(

How can I disable remote access connection window ?

When I try to connect (via TCP/IP) with a VI in another PC (in my local network) it appears the remote access connection window.
How can I disable this (programmatically if possible) ?
A big thanks for your answers.
Linus

Randy,
attached the image of the Remote Access Connection Window that appears when I connect to the VI.
It is the Operating System (Windows) classical panel for Remote Access connections using a modem.
Many thanks.
Linus
Attachments:
Remote_Access.jpg ‏22 KB

Detect remote panel connections?

Is there a way for my VI to 'detect' when someone has connected to it with a Remote Panel and requested control?
I have an issue (due to the size/complexity of my VI I'm sure) that when a RP gains control, after a period of time, the main VI begins to slow down and starts to lose data (it's coming from a TCP connection)!
I'd like to be able to see when a RP gains control, and automatically log them off after a period of time (5 min?). I know that there is a connection time-out on the web publishing page, but it appears to only come into play if 1 RP has control and another requests it. I need to be able to limit the control time of a single RP.
Solved!
Go to Solution.

Cory,
Well, it almost worked...
I'm attaching my little test program 'RP Control.vi'. I've compiled this into an executable that's in my server path, so I can get to it from my laptop (on my network). When I run it from my server, I can press my 'Start' button and nothing happens--no client RP's are connected, so this is as expected.
When I connect via my laptop to the server, my laptop is now the remote client, but it's hasn't requested control -- again, nothing happens when I press my 'Start' button.
When the laptop requests control of the VI, and I press the 'Start' button from the laptop, I see all my data fields filled in, and I show my calculated 'End Time?' which is 1 minute after the laptop got control.
I can then keep pressing my 'Start' button, and see the 'Time Now' update, and when 1 minute elapses, I see my 'Close' LED turn on, indicating I should have activated the 'Close Connection To Client'.
However, the laptop still has control of the VI...it hasn't returned to the server.
Any suggestions as to what I may be doing wrong, or does the 'Close Connection To Client' work differently?
<edited>
Looking at the Method - 'RP.Close Connection To Client' does this return control of the VI to the server copy (which is what I want to do), or does it try to completely disconnect the Remote Panel (which is not what I'm looking for)?
Message Edited by Steve257 on 09-17-2009 02:47 PM
Attachments:
RP Control.vi ‏22 KB

"chaining" remote panel connections

Folks,
I am considering an application design for data acquisition that would be roughly as follows:
Client (web plugin) connects to "main" server. This server will be for viewing files, previous data, printing data, etc. When it is time to acquire new data, the "main" server connects to "DAQ" server, which has the acquisition hardware connected to it. For this to work, the "DAQ" server needs to send it's front panel to the "main" server which then sends it on to the client. Before I go off requesting funds and time to do this, I want to make sure it is possible. I don't see any reason this wouldn't work, but I want to verify.
Additional information: The client can't connect directly to the "DAQ" server. They are on different networks with the bridge being the "main" server.
Thanks,
-M

nathand wrote:
Gary117 wrote:
If your main server and DAQ server are both implemented in Labview, then it is possible (if I understand your setup correctly). You'll need a subpanel on the front panel of your main server. If you pass the subpanel reference to the DAQ server, it can insert itself into the subpanel using a property node.
I haven't tried this, and don't have a setup available to test this right now, but the documentation says that you CANNOT put a remote VI into a subpanel: "You also cannot load the front panel of a VI in a remote application instance". So I can't see how this would work.
I hadn't tried it before with remote machines, but I didn't realize that would be an issue. That's dissapointing.
You may have to send data directly then. Depending on the data you're acquiring and how it's used, you may be able to do some preprocessing on the DAQ server to minimize the amount of data you have to send across the network.
Sorry I wasn't more help

How to connect a CVS server with remote Hosts(NWDS7.0)

Hi Frndz..
I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo'
Can anyone guide me how can i connect that server from remote machines thru NWDS.
Thnaks in Advance
Regards
Rajesh

rajesh,
did u check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d079e754-8c85-2b10-8b9a-b36db5262122
Thanks
Bala Duvvuri

How do I run Remote Panel Connection Mgr on server with just runtime & exe

Similar Messages

Maybe you are looking for