How do I se a checkbox to change the value of another cell?

I am trying to create a spreadsheet for a job quote sheet. In column A I am inserting checkboxes, in column W i have the price of that particular option that coincides with that product. What I am trying to accomplish is if I select the checkbox for an option, the cost (from column W) will jump in Column Z. Then Column Z will be totaled up at bottom, giving my client a total of everything selected. Can this be done and if it can HOW?!
Thanks in Advance!!

James,
Another approach that may work for you would be to have a column for quantity, rather than a checkbox.  If the quantity is greater than zero, then enter the extended price and total it at the bottom of the order list.
In that case, you would write in Z:
=A*W
With no quantity, the result would be zero in Z.
Jerry

Similar Messages

  • How to Visible/Hide an Item based on the value of another Item

    Hi
    I need to visible and hide a textitem based on the value of another item.This form has 3 blocks, and the both item is in the first Master Block.
    My code is:
    if :RECORDTYPE=7 then
         Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_TRUE);
         Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_TRUE);
    ELSE
         Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_FALSE);
    Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_FALSE);
    :BLOCK.ITEM:=NULL;
    end if;     
    I wrote the code in the Validate Trigger, but not working when moving Next Record & Previous Record
    Thanks in advance
    Rizly

    Read the 'Propagation of Property Changes' section towards the end of the page for Set_Item_Property in the online help. I'm not sure what you mean by locking automatically but perhaps it's because of this.
    You should also ensure the item you're setting to invisible is not the current item (check :system.cursor_item and go to a different item if necessary).

  • Using a checkbox to display a value in another cell

    I want to use a checkbox in cell A1 to display in cell B1 either 0 or a value that's in cell C1. I've tried the IF function, but I keep getting a syntax error. Any ideas?

    How could you do the same thing but using only two cells?
    where the check box returns a specific value in the second.
    in this instance its for a staff registration sheet where a checkbox in (A) would return a set value in (B)
    i know this might sound simple to you guys in the know but i cant figure it out! I have been messing around trying things with the if function but still only shows me the red triangle (syntax error).
    A simple solution would be much appreciated.

  • How do I display an image in Numbers based on the value of another cell?

    Here is the situation. I have a list of names in one table. I then have a table of pictures of corresponding to each name. I then have a drop down list in a cell with each of the names in it. I would like to be able to click the drop down list, select a name, and then have the corresponding picture be displayed in a cell. How would I go about doing this?
    Late 2013 rMBP with fully up to date software.

    not possible.  I have wanted to do this myself.  You can post feedback to Apple using the menu item "Numbers > Provide Numbers Feedback"

  • Update a Checkbox based on the value of another Checkbox

    We have a business rule that needs to following to happen.
    If the "Commit" checkbox is checked then the "Forecast" checkbox needs to be checked.
    We would like to handle this through workflow. Here is what we have done so far
    Workflow Rule Condition: FieldValue('<bCommit_ITAG>') = 'Y'
    Action: Field to Update - Field Name* is set to Forecast
    Value is set to: [<Forecast>]='Y'
    Thanks for the help

    Brian,
    What you have written should work, try Value is set to: <Forecast>=Yes.
    This should also be created in the Administration section as its not web services but workflows, you'll get better responses.
    cheers
    Alex

  • Transaction BP: Using data in one screen to change the value in another

    Is there any way to take the data on one tabbed page of the BP transaction screen and use that data to update a field in another tabbed page?
    BR,
    Tony.

    Short answer: no.

  • It possible using javascript to change the value of another jsf text field?

    In my case, I have an input text field and would like to copy it's value on the onchange() event into another text field. Using the destination text field's Id and assigning some content with it's .value property

    Woodstock apparently renders some Javascript/DOM with some homegrown widget framework which on its turn renders the HTML DOM tree instead of plain vanilla HTML. Correct me if I'm wrong, to confirm this, just view the generated HTML source of the page.
    After some Googling I found out that you need getProps() and setProps() to get and set element attributes respectively.
    [http://google.com/search?q=webuijsf+domnode+site:sun.com].
    If you stucks with this, I recommend you to post this question at a forum or mailinglist devoted to Woodstock, e.g at their own homepage at dev.java.net or the Netbeans forum at nabble.com. You're here at a Sun JSF forum, not at a Woodstock forum.

  • How do i show a button based on the value of another button (value is greater then 0)

    I'm am building a form in indesign, and just want to add a visual icon next to buttons when they are filled out... check mark next to a drop down list... so the list have values and i want the check mark (button) to show only when the value of the drop list is greater then 0... can this be done?... easily?....
    thank you!

    Hey Gilad D,
    its been a while since i have been back to this project…..
    now i have time to dedicate to this to get it done….
    if you don't mind i really could use a little help..
    i want to start again and give you the full scope of what i am trying to do, i don't have any real hard files yet...
    its pretty simple (in theory)..
    So i don't know what you do for work, but i work in an environment that has some pretty lazy sales people,
    so i want to create a pdf that steps them through a bunch of questions that they have to answer...
    my thought was, lets break this out into sections…
    so section one has three questions, if they answer all three, then they get a checkmark and section 2 appears
    which would have a few questions in it… etc….
    there would be some easy cross referencing and excel type calculations,… and a few, if you answer yes then another field gets auto filled..etc….
    can acrobat handle this?… or am i wasting time thinking it can?...
    i primarily work on mac's but we do have a PC with live cycle...
    thoughts?….
    thank you,
    ely

  • Change the value of the field on the screen

    Hello All,
    I want to change the value of another field on the screen when the user selects the value for a particular field.
    For eg: If i select ship-to-party value on the screen by F4 based on that the sales office and sales group values should change on the screen.
    I am modifying the internal table that has these values, but its not showing the new values on the screen.
    Please let me know how to resolve this issue.
    Points gauranteed.....
    Thank You,
    Suresh

    hi
    use at selection-screen on help request for field1
    OR  on value request for field1.
    Use selection screen events.
      AT SELECTION-SCREEN OUTPUT
      AT SELECTION-SCREEN ON sel_opt1.
      AT SELECTION-SCREEN ON test1.
    AT SELECTION-SCREEN ON END OF sel_opt1.
    AT SELECTION-SCREEN ON HELP-REQUEST FOR sel_opt1-low.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR test2.
    AT SELECTION-SCREEN ON BLOCK block1
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP rad1.
    Regards,
    Prasanth
    *Reward points if helpful

  • How do I change the value of the Order By field in an MP3 file?

    good day Guys,
    I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
    How do I change the value of the Order By field in an MP3 file?
    for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
    My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
    I've been "collecting" several songs over SEVERAL years
    I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
    I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
    I have used the program Mp3tag to remove the music tags
    I've tried to download the song again and go through Mp3tag program as if it were a new song
    I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
    I've tried to catch the song again, from a previous backup
    I've tried to create a copy of the file at iTunes own
    I've tried to create a new music file in a music recording program
    NOTHING of what I did above resolved
    -> I'm using Windows 7 64-bit Ultimate
    -> I'm using iTunes 12.1.1.4 for 64-bit Windows
    -> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
    -> The iPad is updated with iOS 8.1.3 and is not unlocked
    I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
    Hugs and await answers,
    Paulo Ricardo

    hello turingtest2,
    my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
    at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
    as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
    as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
    I do not know what to do...
    I want to learn to ride the iTunes Music Library, that my work is less
    you know any site that teaches create/manage my iTunes Music Library?
    this site/forum may be in English, no problem
    thanks for all your help and the help of others who responded to my request

  • How do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    how do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
    Regards.

  • How to disable or change the value of h:commandlink jsf component

    Hi,
    I am a student. I am using h:commandlink. I need to change the value of the component once it is clicked by the user. How do i do that?
    If i cannot change the displayed value of the commandlink. I am thinking of atleast disabling the link once the user clicked., to avoid the link being clicked more than once by the user.
    <h:commandlink id = "follow" action = "usermanager.followdoctor" value = "Follow"/>
    Usermanager is my managed bean class for this jsp page. The value "Follow" is the one that i want to be changed to "following" once it is clicked. Please help me. Thanks for your time in advance.

    Hello qimbal2,
    Thanks for getting back to me. you are right , i should disable the link as soon as it is clicked. I went ahead and implemented this logic by using a property in my bean class and binding that property to the value of my link. I wrote the logic in my action method in such a way that when i click on follow for the first time, the value of the link would change to 'Following' and the link would be disabled. It works for me now.
    Thanks,
    Suha

  • HOw can i change the color of a cell

    How can I change the color of a cell when it is selected. I select the cell by pressing enter, then I want the text in the cell to change color to red, but all the cells in the table change color. Please I would be grateful for some help

    Subclass DefaultTableCellRenderer.
    public class MyCellRenderer extends DefaultTableCellRenderer
    Override
    public Componet getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column)
    JLabel lab = new JLabel(String)value);
    lab.setOpaque(true);
    return lab;
    if(isSelected)
    lab.setBackground(Color.red);
    else
    lab.setBackground(Color.white);
    Set the columns in your table:
    table.getCoulumModel.getColumn(0).setCellRenderer(new myCellRenderer());
    table.getCoulumModel.getColumn(1).setCellRenderer(new myCellRenderer());
    etc. for each column in your table.

  • How to change the Value of a Varible while debugging in ECC 6.0

    Hi all,
    How can i change   and Save the Value of a varible while debugging a FM in ECC 6.0.
    I can able to change the Value of a variable by clicking the Pencil Icon (Change icon) which is there next to that value
    But i am not able to save that value
    Please give the suggestions
    Thanks in Advance
    Regards
    Ajay

    Ajay,
    I think you are changing more than one variable value at a time...this things generally happen in this case.
    Go step by step.....
    Press on the pencil button
    value filed becomes editable
    change the value
    and at once press the enter
    the ediatble field automatically becomes non editable, and hence retain the changed value.
    Pooja

  • I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    Remember security on a TC is an illusion.
    Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
    Remember this the next time because anybody at all can change your passwords.
    Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
    Voila .. all your passwords in plain sight to any Tom Dick and Fred.

Maybe you are looking for