Transaction BP: Using data in one screen to change the value in another

Is there any way to take the data on one tabbed page of the BP transaction screen and use that data to update a field in another tabbed page?
BR,
Tony.

Short answer: no.

Similar Messages

Display an exception on one keyfigure based on the value of another key fig

Hello all,
How to run a exception based on some condition i.e
i want to highlight the sales(key figure) which r less than the average sales..
where sales and average sales r keyfigures...
i also created a cal key fig which has has value 1 if sale > avg sale...
i.e How do i display an exception on one keyfigure depending on the value of another keyfigure??
plz reply its urgent...
thnx in advance...

Hello Ajay, did you got an answer for your problem? I'm interested...
Thx Masen
Edited by: Masen-Fuad Marei on Nov 25, 2009 6:26 PM

Update one column while getting the value in another column

Is it possible to in one single SQL statement update two columns in a table while at the same time obtaining the value of another column, on the same row, in the same table, and independently (that is, the update of the columns has nothing to do with the data that I want from another column)*?* Of course, I can do this in two operations, one being a "select" and the other one being an "update", but since I am in the same table and even on the same row, is it really necessary to make TWO database calls? That's why I want to combine the the two SQL-statements, for reasons of presumed effiency.

jsun wrote:
Is it possible to in one single SQL statement update two columns in a table while at the same time obtaining the value of another column, on the same row, in the same table, and independently (that is, the update of the columns has nothing to do with the data that I want from another column)*?* Of course, I can do this in two operations, one being a "select" and the other one being an "update", but since I am in the same table and even on the same row, is it really necessary to make TWO database calls? That's why I want to combine the the two SQL-statements, for reasons of presumed effiency.Two statements != two database calls.
At least not in terms of SQL.
JDBC requires a 'statement' but in SQL (depending on the data source) that can include multiple statements. An obvious example of this is a stored proc but there are other ways as well.

Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

I don't even know if this is posible.
I'm using iwork '09
View PDF

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

How to modify F4 help of one parameter based on the value of another?

Hi,
My Query is as follows:
I have 3 select-options / parameters on the selection screen.
If I enter some value in the first parameter the values in the second parameter should reflect accordingly.
For example: The 3 selection-screen parameters are:
select-options: s_werks for pa0001-werks no intervals,
                      s_btrtl for pa0001-btrtl no intervals,
                      s_kostl for pa0001-kostl no intervals.
On exceuting the report, say I do a F4 and select '1000' for the first parameter (s_werks).
Now after selecting the value for the first parameter if I do a F4 on the second parameter (s_btrtl) then it should prompt me with a F4 help containing values only corresponding to '1000' entered in s_werks and not all the values maintainined for btrtl.
I have tried AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_BTRTL-LOW.
And then used the FM F4IF_INT_TABLE_VALUE_REQUEST.
But At Selection-Screen On Value Request the selection screen parameter s_werks does not show any value. It reflects the value only once it reaches Start-of-selection.
Can anyone please guide me how to go about it?

hi
Please do it in this way..
TABLES: pa0001.
select-options: s_werks for pa0001-werks no intervals,
s_btrtl for pa0001-btrtl no intervals,
s_kostl for pa0001-kostl no intervals.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_BTRTL-LOW.
PERFORM sub_pop_btrtl .
*&      Form sub_pop_btrtl
      text
--> p1        text
<-- p2        text
form sub_pop_btrtl .
DATA : l_wa_dynp TYPE dynpread,
        l_i_dynp TYPE STANDARD TABLE OF dynpread,
        l_wa_temp LIKE LINE OF S_werks.
REFRESH s_temp[].
l_wa_dynp-fieldname = 'S_WERKS-LOW'.
APPEND l_wa_dynp TO l_i_dynp.
Get the screen values of template
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = l_i_dynp
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc <> 0.
Do Nothing
ENDIF.
Put the screen value in the select-options
READ TABLE l_i_dynp INTO l_wa_dynp INDEX 1.
l_wa_temp-sign = 'I'.
l_wa_temp-option = 'EQ'.
l_wa_temp-low = l_wa_dynp-fieldvalue.
Now you use l_wa_temp as plant field
endform.                    " sub_pop_btrtl

It possible using javascript to change the value of another jsf text field?

In my case, I have an input text field and would like to copy it's value on the onchange() event into another text field. Using the destination text field's Id and assigning some content with it's .value property

Woodstock apparently renders some Javascript/DOM with some homegrown widget framework which on its turn renders the HTML DOM tree instead of plain vanilla HTML. Correct me if I'm wrong, to confirm this, just view the generated HTML source of the page.
After some Googling I found out that you need getProps() and setProps() to get and set element attributes respectively.
[http://google.com/search?q=webuijsf+domnode+site:sun.com].
If you stucks with this, I recommend you to post this question at a forum or mailinglist devoted to Woodstock, e.g at their own homepage at dev.java.net or the Netbeans forum at nabble.com. You're here at a Sun JSF forum, not at a Woodstock forum.

Conditionally Formatting One Column Based On The Value of Another Column

I have the following requirement:
I have 2 columns in a report showing Actual Sales & Budget Sales each year. I am using a bar chart to show the different values for these 2 columns.
I need to conditionally format the column "Actual Sales" so that if it is less than the "Budget Sales" it will appear in red, and green if "Actual Sales" is greater than "Budget Sales." So in a nutshell,
CASE WHEN "Actual Sales" < "Budget Sales" THEN
RED
ELSE
GREEN
END
Thoughts anyone?

CASE WHEN (COL1 - COL2) < 0 then Red else Green end
regards
John
http://obiee101.blogspot.com

Parameter Form-How to use a user parameter to retrieve list of values for another par

I am developing a report in Reports 6i. There are 2 parameters on parameter form namely year and month.
LOV for Year is retrieved from database. After user selects a value from LOV for year, I want to retrieve another LOV for month parameter based on selected year. That is how can we use a user parameter's value to dynamically retrieve an LOV for another parameter on the same parameter form.
Pl. guide.
Thanks in anticipation.

You can't restrict the "List of Values" of one parameter based on the value of another parameter within the Reports Builder/Runtime parameter form.
The SQL select statements within LOV's are only executed once. They aren't re-calculated when you enter, leave or change other field values in the parameter form. This is mainly because there is no event model in the Reports parameter form and it only supports basic form functionality.
To do what you're after in a client-server environment you need to create an Oracle Forms "parameter form" and use that to execute the Report using the run_product() call. Actually, you should probably use Oracle Forms for any more generic "form" functionality such as radio buttons or check boxes.
If you're in a Web rather than Client-Server environment, it may be easier to create a JSP based parameter form. You can then use Reports 9i since it has JSP support to assist here.

Change the value of the field on the screen

Hello All,
I want to change the value of another field on the screen when the user selects the value for a particular field.
For eg: If i select ship-to-party value on the screen by F4 based on that the sales office and sales group values should change on the screen.
I am modifying the internal table that has these values, but its not showing the new values on the screen.
Please let me know how to resolve this issue.
Points gauranteed.....
Thank You,
Suresh

hi
use at selection-screen on help request for field1
OR on value request for field1.
Use selection screen events.
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN ON sel_opt1.
AT SELECTION-SCREEN ON test1.
AT SELECTION-SCREEN ON END OF sel_opt1.
AT SELECTION-SCREEN ON HELP-REQUEST FOR sel_opt1-low.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR test2.
AT SELECTION-SCREEN ON BLOCK block1
AT SELECTION-SCREEN ON RADIOBUTTON GROUP rad1.
Regards,
Prasanth
*Reward points if helpful

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. years each month.

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. year each month. I need to create a spreedsheet using the the Acutlas from the year-to-date and from last year-to-date, but need to report each month.

Hi Tony,
Answering your question would be easier given a screen shot of the source table and one of what you want the summary table to look like.
Is the data you want for each month in a single cell o the source table, or does the summary table need to collect February's data (for example) from several cells and do some math with those numbers before presenting them on the summary table?
Regards,
Barry

How to use one variable as a default value for another variable?

Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathryn

u can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey

Using more than one input device at the same time

Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
Thanks

Hi,
yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
Have fun!
Fox

'File in Use' message is received when one user is in the report and another user tries to open the Excel template

‘File in Use’ message is received when one user is in the report and another user tried to open the excel template. how to make excel template shared for multiple users so the users don’t see the ‘File in Use’ message?

Hi Febin,
In addition to others’ replies, we can create a shared workbook and place it on a network location where several people can
edit the contents simultaneously. For example, if the people in your work group each handle several projects and need to know the status of each other's projects, the group can use a shared workbook to track the status of the projects. All persons involved
can then enter the information for their projects in the same workbook.
Regarding how to do this,
the following article can be referred to reference.
Use a shared workbook to collaborate
http://office.microsoft.com/en-in/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
Best regards,
Frank Shen

Using more than one Business area in the same report

Hi,
Is it possible / recommended to use more than one business area in the same report.
For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
Thanks

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

Today my friend dropped my ipod nano 6g and the screen broked. Have one chance to change the screen?? Where? I'm from Brazil.

Today my friend dropped my ipod nano 6g and the screen broked. Have one chance to change the screen?? Where? I'm from Brazil.

Apple will not just "give" you a new one. Apple will replace the iPod for their standard out-of-warranty replacement charge:
http://www.apple.com/support/ipod/service/faq/
The replacement may be refurbished or new, at Apple's discretion, and there will be no way for you to tell the difference.
Regards.

Transaction BP: Using data in one screen to change the value in another

Similar Messages

Maybe you are looking for